Qasim Murtaza

Teaching and Research Knowledge Area

1. Materials Engineering                   (b)  Manufacturing Machines & Process Engg

(c) Advance Manufacturing Process    (d) Work Method Analysis & Measurements

(e) Metal Cutting and Tool Design      (f) Precision Manufacturing Engineering

(g) Welding and Metallurgy                (h) Surface modification and Metal coatings

(i) Surface modification through friction stir processing

(j) Metal matrix composites

 

Research Activities (Metal Coatings, Surface Modification, Friction Stir Processing, Metal Matrix Composites, Thermal Spray, & Industrial Engg)

Guided      M.Tech: 50,                     Ph.D.; 25,            

Guiding     M.Tech 01,                     Ph.D.; 07

 

Current Position and Address: Professor (Since 2015), Department of Mechanical Engineering, Delhi Technological University, Main Bawana Road, Delhi 110042

 Past work:

Associate Professor, AMU on Lien

Research Associate (Post doc.) for one year (20 Sept 2008 to 9Oct 2009). Project in collaboration with Alphatek at Manchester Metropolitan University, Manchester, UK.

Three plus years of Teaching Assistant (May 2003 to Nov 2006) at Dublin City University, Dublin, Ireland

Six Plus Years of teaching experience as a Lecturer in the Mechanical Engineering Department, Aligarh Muslim University(9 Feb 1997 to 30 May 2003). 

        (a) Engineering Materials & Metallurgy                 

       (b)  Manufacturing Technology-II

(c)  Precision Engineering

(d)  Advanced Manufacturing Process    

(e) Metal Cutting and Tool Design     

(f) Welding and Metallurgy               

(g) Thermal Spray Processes

 

 

1. Singh, Indra Jeet; Murtaza, Qasim;  A comprehensive review on effect of cold metal transfer welding parameters on dissimilar and similar metal welding, Journal of Engineering Research, 13, 2 1184-1201            2025    Elsevier
2. Abdul Wahed, Ziad; Hasan, Faisal; Murtaza, Qasim; Nawaz, Ali; Faheem, Abdul; Shamim, Farhan Ahmad; Effect of friction stir processing parameters on mechanical properties of Al8011/ceo2/sic/RHA metal matrix composite        Canadian Metallurgical Quarterly, 64, 1, 116-129, 2025         Taylor & Francis
3. Sadique, Hussam; Murtaza, Qasim;  Numerical study and moth flame optimization of thermal–hydraulic performance of fractal microchannel heat sink with ribs and cavity, International Journal of Heat and Fluid Flow, 113, 109777, 2025        Elsevier
4. Singh, Vibhu; Niranjan, MS; Murtaza, Qasim; Evaluation of the role of process parameters of CMT welding and their statistical behaviour on the tensile properties of weld joint of novel aluminium hybrid composite, Welding in the World,  69, 245-267, 2025      Springer
5. Singh, Vibhu; Murtaza, Qasim; Niranjan, MS;  Analyzing the synergistic effects of hard ceramic tib2 and rare earth oxide La2O3 on mechanical behaviour, wear resistance, and residual stress of AA6061-T6 hybrid composite fabricated via ultrasonic-assisted stir casting, Materials Chemistry and Physics, 325, 129727, 2024 Elsevier
6. Gaur, Shailendra Kumar; Chaudhary, Ashwani; Murtaza, Qasim; Mishra, RS;  Comparative analysis of thermally evaporated nanoscale cds thin film's structural, morphological, optical and nanomechanical properties, Journal of Molecular Structure, 1324, 140850, 2025 Elsevier
7. Vishnoi, Mohit; Singh, Vikrant; Bansal, Anuj; Murtaza, Qasim; Kumar, Paras;  Effect of laser ablation over cavitation, slurry erosion, and surface properties of 86WC-10Co-4Cr based ceramic coating developed using HP-HVOLF, Surface and Coatings Technology,          492, 131230, 2024  Elsevier
8. Vishnoi, Mohit; Murtaza, Qasim; Kumar, Paras; Bansal, Anuj; Singh, Vikrant;  Rare earth-doped ceramic coatings: Analysis of microstructure, mechanical properties, and slurry Erosion resistance using high pressure-high velocity oxy-liquid fuel deposition, International Journal of Refractory Metals and Hard Materials, 125, 106873, 2024  Elsevier
9. Jain, Sudeep Kumar; Murtaza, Qasim; Singh, Pushpendra;  Microstructural and mechanical properties analysis of SS 316L structure fabricated using CMT-wire arc additive manufacturing, Journal of Adhesion Science and Technology, 39, 133-153, 2025          Taylor & Francis
10. Bhardwaj, Vishal; Singh, Indra Jeet; Murtaza, Qasim;  Exploring the cutting edge: Recent trends in cold metal transfer welding, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,  2024       SAGE Publications
11. Jain, Sudeep Kumar; Murtaza, Qasim; Singh, Pushpendra; Investigations and multi-response optimization of process parameters for SS316L cold metal transfer-wire arc additive manufactured samples, Journal of Materials Engineering and Performance, 34     10, 8462-8472 2025 Springer US
12. Garg, Siddharth; Murtaza, Qasim;  Comparative Analysis of Dip-Brazing and TIG Welding on the Properties of Al-64430 Joints, Journal of Adhesion Science and Technology, 39    3, 386-400 2025 Taylor & Francis
13. Thakur, Anupam; Murtaza, Qasim; Ahmed, Jahangeer; Choon Kit, Chan; Prakash, Chander; Khanna, Virat; Jasrotia, Rohit; Sillanpää, Mika; Ramya, M; Liu, Louis WY;   Evaluation of tribological parameters for boron carbide and graphite infused aluminium hybrid composite fabricated by stir casting technique, Scientific Reports, 14,  23303, 2024,      Nature Publishing Group UK London
14. Vishnoi, Mohit; Singh, Vikrant; Murtaza, Qasim; Bansal, Anuj; Jeyaprakash, N;  Influence of different rare earth oxides on CNC ultrasonic machining of HP-HVOLF sprayed ceramics coating, Ceramics International, 51, 1233-1246       2025    Elsevier
15. Naji, Fadia Ahmed A; Murtaza, Qasim; Khaled, Narjes Ibrahem; Nasr, Mustafa M;  Future perspectives and research trends in advanced chemo-mechanical magneto-rheological finishing for enhanced surface quality, Multiscale and Multidisciplinary Modeling, Experiments and Design, 8, 42 2025       Springer
16. Kumar, Deepak; Singh, Shailesh Kumar; Singh, Pushpendra; Murtaza, Qasim; Walia, Ravinderjit Singh; Tyagi, Mohit; Wear behaviour of ceramic coating (Al2O3-40% tio2) in dry condition for automotive applications, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024    SAGE Publications Sage UK: London, England
17. Vishnoi, Mohit; Murtaza, Qasim; Kumar, Paras;        Assessment of Mechanical and Slurry Erosive Behavior on Laser-Textured Stainless Steel (SS410), Journal of Materials Engineering and Performance,         33        24            13924-13940   2024    Springer
18. Naji, Fadia Ahmed Abdullah; Murtaza, Qasim;         A novel environmentally friendly thermochemical process for Ti64 alloy surface modification for biomedical implants, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 706, 135806            2025    Elsevier
19. Singhal, Chirag; Murtaza, Qasim;  Numerical optimization of cold gas dynamic spray process parameters through response surface methodology, Advances in Materials and Processing Technologies, 2024   Taylor & Francis
20. Singh, Indra Jeet; Murtaza, Qasim; Kumar, Paras;  Effect of CMT welding process parameters on the microstructural and mechanical properties of dissimilar aluminum Alloys of AA8011 and AA6061, ransactions of the Indian Institute of Metals, 78, 2025       Springer India New Delhi
21. Singh, Vibhu; Murtaza, Qasim; Niranjan, MS; Tailoring the microstructure and properties of AA6061-T6/tib2 cast composites with the addition of rare earth La2O3 nanoparticles, Composites Communications, 53, 102230            2025    Elsevier
22. Jain, Sambhav; Singh, Kuldeep; Murtaza, Qasim;  Object Shape Classification Using 4× 4 Ultrasonic Sensor Array   2024 4th International Conference on Technological Advancements in Computational Sciences (ICTACS), 935-941     2024    IEEE
23. Singh, Vibhu; Murtaza, Qasim;          Thermo-Mechanical Behaviour of Cold Metal Transfer-Welded Aluminium Alloy Composite Reinforced with Hard Ceramic tib2 and Rare Earth La2O3 Particles, Arabian Journal for Science and Engineering,  2025     Springer
24. Garg, Siddharth; Singh, Aditya; Murtaza, Qasim;  Measuring the Impact of Infill Pattern and Infill Density on the Properties of 3D-Printed PLA via FDM, Journal of Materials Engineering and Performance, Jan-14            2025    Springer
25. Kumarjain, S; Murtaza, Q; Singh, P;  Microstructural and Mechanical Characterization of Wire Arc Additive Manufactured Stainless Steel 316L, Archives of Metallurgy and Materials, 119-126-119-126, 2025  Institute of Metallurgy and Materials Science of Polish Academy of Sciences
26. Kumar, Deepak; Ansari, Abdul Khaliq; Singh, Shailesh Kumar; Walia, Ravinderjit Singh; Singh, Pushpendra; Murtaza, Qasim;        Investigating the characterization and damping effects in thermally sprayed Al2O3–40% tio2 ceramic coating, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2025, SAGE Publications Sage UK:
27. Kumar Jain, S; Murtaza, Q; Singh, P; CMT assisted Wire arc additive manufacturing of ss 316L: fabrication, characterization, and fractography       Archives of Metallurgy and Materials, 147-153-147-153        2025            Institute of Metallurgy and Materials Science of Polish Academy of Sciences
28. Jain, S Kumar; Murtaza, Q; Singh, P; Microstructural and mechanical characterization of wire arc additive manufactured stainless steel 316l.       Archives Of Metallurgy & Materials, 70, 2025
29. Butola, Ravi; Dev Pandey, Kapil; Murtaza, Qasim; Walia, Ravinderjit Singh; Tyagi, Mohit; Srinivas, Krovvidi; Chaudhary, Arun Kumar;  Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems,  2024 SAGE Publications Sage UK: London
30. Garg, Siddharth; Bansal, Sourabh; Murtaza, Qasim; Failure investigation of an elbow pipe used in sewage water treatment facility, Materials and Corrosion, 75,  1185-1192, 2024, Wiley
31. Thakur, Anupam; Khanna, Virat; Murtaza, Qasim; A Review on Reinforcement and Its Effect on Aluminium-Based Composites, Metal Matrix Composites: A Modern Approach to Manufacturing, 176-199, 2024, Bentham Science Publishers
32. Thakur, Anupam; Murtaza, Qasim; Ahmed, Jahangeer; Choon Kit, Chan; Prakash, Chander; Khanna, Virat; Jasrotia, Rohit; Sillanpää, Mika; Ramya, M; Liu, Louis WY;                 Evaluation of tribological parameters for boron carbide and graphite infused aluminium hybrid composite fabricated by stir casting technique, Scientific Reports, 14, 23303, 2024       Nature Publishing
33. Vishnoi, Mohit; Singh, Vikrant; Murtaza, Qasim; Bansal, Anuj; Jeyaprakash, N; Influence of different rare earth oxides on CNC ultrasonic machining of HP-HVOLF sprayed ceramics coating, Ceramics International, 2024, Elsevier
34. Kumar, Deepak; Singh, Shailesh Kumar; Singh, Pushpendra; Murtaza, Qasim; Walia, Ravinderjit Singh; Tyagi, Mohit;                 Wear behaviour of ceramic coating (Al2O3-40% TiO2) in dry condition for automotive applications, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024, SAGE
35. Vishnoi, Mohit; Murtaza, Qasim; Kumar, Paras;                 Assessment of Mechanical and Slurry Erosive Behavior on Laser-Textured Stainless Steel (SS410), Journal of Materials Engineering and Performance, Jan-17, 2024, Springer
36. Naji, Fadia Ahmed A; Murtaza, Qasim;   A Novel Environmentally Friendly Thermochemical Process for Ti46 Alloy Surface Modification for Biomedical Implants, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 135806, 2024      , Elsevier
37. Faheem, Abdul; Tyagi, Ankit; Pandey, SM; Hasan, Faisal; Murtaza, Qasim; A sustainable ecofriendly additive manufacturing approach of repairing and coating on the substrate: cold spray, Australian Journal of Mechanical Engineering, 21, 1624-1641, 2023, Taylor & Francis
38. Meena, Shanti Lal; Butola, Ravi; Khan, Muhsin Ahmad; Walia, RS; Murtaza, Qasim; Influence of process parameters in synergic MIG welding of 304L stainless steel using response surface methodology, Advances in Materials and Processing Technologies, 9, 196-205, 2023, Taylor & Francis
39. Butola, Ravi; Dev Pandey, Kapil; Murtaza, Qasim; Walia, Ravinderjit Singh; Tyagi, Mohit; Srinivas, Krovvidi; Chaudhary, Arun Kumar; Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2023, SAGE
40. Thakur, Anupam; Khanna, Virat; Murtaza, Qasim; Tribological study of aluminium-B4C/Gr composite-An experimental study, Materials Today: Proceedings, 2023, Elsevier
41. Vishnoi, Mohit; Murtaza, Qasim; Kumar, Paras;                 Mechanical and Erosion Characterization of Untreated and Solution-Treated Nitrogen-Alloyed (23-8N) Austenitic Stainless Steel, Journal of Materials Engineering and Performance, 32, 11107-11117, 2023, Springer
42. Chourasia, Shubhangi; Tyagi, Ankit; Murtaza, Qasim; Walia, RS; Sharma, Prince; A Critical Review on Industry 5.0 and Its Medical Applications, Advances in Modelling and Optimization of Manufacturing and Industrial Systems: Select Proceedings of CIMS 2021, 251-261, 2023, Springer
43. Khan, Mohsin; Zunaid, Mohammad; Murtaza, Qasim; Computational simulation of cold spray coating for optimal injector length, Case Studies in Thermal Engineering,      51, 103655, 2023, Elsevier
44. Vishnoi, Mohit; Murtaza, Qasim; Kumar, Paras;                 Characterization of erbium oxide doped HP-HVOF deposited carbide ceramic coating on martensitic steel, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237   ,  5743-5754, 2023, SAGE
45. Chourasia, Shubhangi; Pandey, SM; Murtaza, Qasim; Agrawal, Saurabh; Gupta, Kalpana; Redefining industry 5.0 in ophthalmology and digital metrology: a global perspective, MAPAN, 38, 527-545, 2023, Springer
46. Ali, Shahazad; Murtaza, Qasim; Gupta, Pallav; Synergetic Effect of Gr-B4C Reinforcement on the Structural and Mechanical Properties of AA6351 Hybrid Metal Matrix Composites, ECS Journal of Solid State Science and Technology, 12, 67002, 2023, IOP  Publishing
47. Khan, Mohsin; Zunaid, Mohammad; Murtaza, Qasim;  CFD Analysis of Particle Shape and Size on Impact Velocity and Effect of Stand-off Distance in the Cold Spray Process, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 109-119, 2023, Springer
48. Chourasia, Shubhangi; Tyagi, Ankit; Pandey, Shailesh Mani; Murtaza, Qasim; Gupta, Kalpana;  A Critical Review on Design and Examination of High-Temperature Thermal Spray Carbon-Based Composite Coatings at High Temperature     Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 853-860, 2023, Springer
49. Chourasia, Shubhangi; Tyagi, Ankit; Pandey, Shailesh Mani; Murtaza, Qasim; A Critical Review of Thermal-Barrier Coatings and Critical Examination on Post Heat Treatment Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 845-852, 2023, Springer
50. Singh, Shailesh Kumar; Chattopadhyaya, Somnath; Murtaza, Qasim; Pandey, Shailesh Mani; Walia, RS; Tyagi, Mohit; Kumar, Satyajeet; A Comprehensive Review of Cold Spray Coating Technique, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 175-181, 2023, Springer
51. Kumar, Deepak; Walia, Ravinderjit S; Singh, Pushpendra; Murtaza, Qasim; Tribological behaviour of thermally sprayed ceramic coating at high temperature, International Journal of Materials Research, 114, 773-782, 2023, De Gruyter
52. Automotive industry and industry 4.0-Circular economy nexus through the consumers' and manufacturers’ perspectives: A case study, SWH Rizvi, S Agrawal, Q Murtaza, Renewable and Sustainable Energy Reviews, Vol 183, pp113517, 2023, SCIE, IF 15.9, Elsevier
53. Mechanical and Surface Wettability Analysis of Rare Earth Modified Composite Coating Developed Using Metal Spraying, M Vishnoi, Q Murtaza, P Kumar, Arabian Journal for Science and Engineering,  1-12, 2023, SCI, IF 2.9, Springer

54.  

55. Integration of Nanodiamonds and Graphene in Plasma-Sprayed Al2O3 Matrix for Enhancing the Tribological Properties, S Chourasia, Q Murtaza, S Agrawal, Journal of Materials Engineering and Performance, 1-13, 2023, SCIE, IF 2.3, Springer
56. Tribological behaviour of thermally sprayed ceramic coating at high temperature, D Kumar, RS Walia, P Singh, Q Murtaza, International Journal of Materials Research, 2023, SCIE, IF 0.81 , De Gruyter
57. A Comprehensive Review of Cold Spray Coating Technique, SK Singh, S Chattopadhyaya, Q Murtaza, SM Pandey, RS Walia, M Tyagi, ...Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
58. A Critical Review of Thermal-Barrier Coatings and Critical Examination on Post Heat Treatment, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
59. A Critical Review on Design and Examination of High-Temperature Thermal Spray Carbon-Based Composite Coatings at High Temperature, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, K Gupta, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
60. CFD Analysis of Particle Shape and Size on Impact Velocity and Effect of Stand-off Distance in the Cold Spray Process, M Khan, M Zunaid, Q Murtaza, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
61. Synergetic Effect of Gr-B4C Reinforcement on the Structural and Mechanical Properties of AA6351 Hybrid Metal Matrix Composites, S Ali, Q Murtaza, P Gupta, ECS Journal of Solid State Science and Technology 12 (6), 067002, 2023, (SCIE, IF 2.2, IOP Science)
62. Redefining Industry 5.0 in Ophthalmology and Digital Metrology: A Global Perspective, S Chourasia, SM Pandey, Q Murtaza, S Agrawal, K Gupta, MAPAN, 1-19, 2023, SCIE, IF 1.0 Springer
63. Characterization of erbium oxide doped HP-HVOF deposited carbide ceramic coating on martensitic steel, M Vishnoi, Q Murtaza, P Kumar, Proceedings of the Institution of Mechanical Engineers, Part C:  Journal of Mechanical Engineering Science, 2023, SCIE, IF 2.0 SAGE
64. Development of ZrB2-SiC Plasma-Sprayed Ceramic Coating for Thermo-chemical Protection in Hypersonic Vehicles, K Gupta, Q Murtaza, N Yuvraj, Journal of Materials Engineering and Performance, 1-10, 2023, SCIE, IF 2.3, Springer
65. A Critical Review on Industry 5.0 and Its Medical Applications, S Chourasia, A Tyagi, Q Murtaza, RS Walia, P Sharma, Advances in Modelling and Optimization of Manufacturing and Industrial Systems: Select Proceedings of CIMS 2021, Springer
66. Mechanical and Erosion Characterization of Untreated and Solution-Treated Nitrogen-Alloyed (23-8N) Austenitic Stainless Steel, M Vishnoi, Q Murtaza, P Kumar, Journal of Materials Engineering and Performance, 1-11, 2023, SCIE, IF 2.3, Springer
67. Tribological study of aluminium-B4C/Gr composite-An experimental study, A Thakur, V Khanna, Q Murtaza, Materials Today: Proceedings, 2023, Elsevier
68. Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing, R Butola, K Dev Pandey, Q Murtaza, RS Walia, M Tyagi, K Srinivas, Arun Kumar Chaudhary, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2023, SCIE, IF 6.0, SAGE
69. Industry 5.0 for sustainable manufacturing: New product, services, organizational and social information, S Chourasia, SM Pandey, K Gupta, Q Murtaza, RS Walia, Surface Engineering, 243-255, 2022, Taylor & Francis
70. Redefining surface in global perspective, S Chourasia, SM Pandey, K Gupta, A Faheem, Q Murtaza, RS Walia, Surface Engineering: Methods and Applications,  2022, Taylor & Francis
71. A review of metallic deposition in polymer substrate using cold spray additive manufacturing approach, A Faheem, F Hasan, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, Surface Engineering: Methods and Applications, 163, 2022, Taylor & Francis
72. Characterization of finished surface through thermal additive centrifugalabrasive flow machining for better surface integrity, A Parvesh, RS Walia, M Qasim, R MS, Indian Journal of Engineering and Materials Sciences (IJEMS) 29 (1), 29-44, 2022
73. Heat transfer augmentation in microchannel heat sink using secondary flows: A review, H Sadique, Q Murtaza, Samsher International Journal of Heat and Mass Transfer 194, 123063, 2022, SCIE, IF 5.2 Elsevier 
74.  
75.  
76. Automotive industry and industry 4.0-Circular economy nexus through the consumers' and manufacturers’ perspectives: A case study, SWH Rizvi, S Agrawal, Q Murtaza, Renewable and Sustainable Energy Reviews, Vol 183, pp113517, 2023, SCIE, IF 15.9, Elsevier
77. Mechanical and Surface Wettability Analysis of Rare Earth Modified Composite Coating Developed Using Metal Spraying, M Vishnoi, Q Murtaza, P Kumar, Arabian Journal for Science and Engineering,  1-12, 2023, SCI, IF 2.9, Springer
78. Integration of Nanodiamonds and Graphene in Plasma-Sprayed Al2O3 Matrix for Enhancing the Tribological Properties, S Chourasia, Q Murtaza, S Agrawal, Journal of Materials Engineering and Performance, 1-13, 2023, SCIE, IF 2.3, Springer
79. Tribological behaviour of thermally sprayed ceramic coating at high temperature, D Kumar, RS Walia, P Singh, Q Murtaza, International Journal of Materials Research, 2023, SCIE, IF 0.81 , De Gruyter
80. A Comprehensive Review of Cold Spray Coating Technique, SK Singh, S Chattopadhyaya, Q Murtaza, SM Pandey, RS Walia, M Tyagi, ...Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
81. A Critical Review of Thermal-Barrier Coatings and Critical Examination on Post Heat Treatment, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
82. A Critical Review on Design and Examination of High-Temperature Thermal Spray Carbon-Based Composite Coatings at High Temperature, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, K Gupta, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
83. CFD Analysis of Particle Shape and Size on Impact Velocity and Effect of Stand-off Distance in the Cold Spray Process, M Khan, M Zunaid, Q Murtaza, Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021, 2023
84. Synergetic Effect of Gr-B4C Reinforcement on the Structural and Mechanical Properties of AA6351 Hybrid Metal Matrix Composites, S Ali, Q Murtaza, P Gupta, ECS Journal of Solid State Science and Technology 12 (6), 067002, 2023, (SCIE, IF 2.2, IOP Science)
85. Redefining Industry 5.0 in Ophthalmology and Digital Metrology: A Global Perspective, S Chourasia, SM Pandey, Q Murtaza, S Agrawal, K Gupta, MAPAN, 1-19, 2023, SCIE, IF 1.0 Springer
86. Characterization of erbium oxide doped HP-HVOF deposited carbide ceramic coating on martensitic steel, M Vishnoi, Q Murtaza, P Kumar, Proceedings of the Institution of Mechanical Engineers, Part C:  Journal of Mechanical Engineering Science, 2023, SCIE, IF 2.0 SAGE
87. Development of ZrB2-SiC Plasma-Sprayed Ceramic Coating for Thermo-chemical Protection in Hypersonic Vehicles, K Gupta, Q Murtaza, N Yuvraj, Journal of Materials Engineering and Performance, 1-10, 2023, SCIE, IF 2.3, Springer
88. A Critical Review on Industry 5.0 and Its Medical Applications, S Chourasia, A Tyagi, Q Murtaza, RS Walia, P Sharma, Advances in Modelling and Optimization of Manufacturing and Industrial Systems: Select Proceedings of CIMS 2021, Springer
89. Mechanical and Erosion Characterization of Untreated and Solution-Treated Nitrogen-Alloyed (23-8N) Austenitic Stainless Steel, M Vishnoi, Q Murtaza, P Kumar, Journal of Materials Engineering and Performance, 1-11, 2023, SCIE, IF 2.3, Springer
90. Tribological study of aluminium-B4C/Gr composite-An experimental study, A Thakur, V Khanna, Q Murtaza, Materials Today: Proceedings, 2023, Elsevier
91. Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing, R Butola, K Dev Pandey, Q Murtaza, RS Walia, M Tyagi, K Srinivas, Arun Kumar Chaudhary, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2023, SCIE, IF 6.0, SAGE
92. Industry 5.0 for sustainable manufacturing: New product, services, organizational and social information, S Chourasia, SM Pandey, K Gupta, Q Murtaza, RS Walia, Surface Engineering, 243-255, 2022, Taylor & Francis
93. Redefining surface in global perspective, S Chourasia, SM Pandey, K Gupta, A Faheem, Q Murtaza, RS Walia, Surface Engineering: Methods and Applications,  2022, Taylor & Francis
94. A review of metallic deposition in polymer substrate using cold spray additive manufacturing approach, A Faheem, F Hasan, S Chourasia, A Tyagi, SM Pandey, Q Murtaza, Surface Engineering: Methods and Applications, 163, 2022, Taylor & Francis
95. Characterization of finished surface through thermal additive centrifugal abrasive flow machining for better surface integrity, A Parvesh, RS Walia, M Qasim, R MS, Indian Journal of Engineering and Materials Sciences (IJEMS) 29 (1), 29-44, 2022
96. Heat transfer augmentation in microchannel heat sink using secondary flows: A review, H Sadique, Q Murtaza, Samsher International Journal of Heat and Mass Transfer 194, 123063, 2022, SCIE, IF 5.2 Elsevier
97. Syed Mohammed, Arsalan; Anuj; Lodhi, Aditya Shyam; Murtaza, Qasim;               Techno?economic feasibility of hydrogen based electric vehicle charging station: a case study, International Journal of Energy Research, 46, 14145-14160, 2022, John Wiley & Sons
98. Rizvi, Syed Wasiul Hasan; Agrawal, Saurabh; Murtaza, Qasim; Circularity issues and blockchain technology in the auto industry, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44, 7132-7144, 2022        , Taylor & Francis

99. 107.Murtaza, Qasim; Stokes, Joseph; Ardhaoui, Malika; Computational fluid dynamics analysis of the production of bio-thermal spray hydroxyapatite powders, International, Journal of Computational Materials Science and Surface Engineering, 5, 31-54, 2012, Inderscience Publishers Ltd

100. Talib, Faizal; Murtaza, Qasim; Personality Aspects of Entrepreneur for Rural Areas in India, Women and Rural Entrepreneurship in India, Abhishek Publications, Chandigarh, 2002        
101. Hamiuddin, Mohammad; Murtaza, Qasim; Machinability of phosphorous containing sintered steels, Materials chemistry and physics    , 67, 78-84, 2001,  Elsevier
102.  
103. Faheem, Abdul; Hasan, Faisal; Chourasia, Shubhangi; Tyagi, Ankit; Pandey, Shailesh Mani; Murtaza, Qasim; A review of metallic deposition in polymer substrate using cold spray additive manufacturing approach, Surface Engineering, 163-167,     2022, CRC Press
104. Chourasia, Shubhangi; Pandey, Shailesh Mani; Gupta, Kalpana; Faheem, Abdul; Murtaza, Qasim; Walia, RS; Surface engineering: Redefining surface in global perspective     Surface Engineering, 2022, CRC Press
105. Chourasia, Shubhangi; Pandey, Shailesh Mani; Gupta, Kalpana; Murtaza, Qasim; Walia, RS; Industry 5.0 for sustainable manufacturing: New product, services, organizational and social information, Surface Engineering, 243-255, 2022, CRC Press
106. Walia, RS; Murtaza, Qasim; Pandey, Shailesh Mani; Tyagi, Ankit;                Surface Engineering: Methods and Applications, 2022, CRC Press
107. Jain, Sudeep Kumar; Murtaza, Qasim; Singh, Pushpendra; Datta, Rituparna; A Critical Review on Dissimilar Metals Joining Using Cold Metal Transfer Welding, NeuroQuantology, 1896, 2022, NeuroQuantology
108. Ramakant, Rana; Walia, RS; Murtaza, Qasim; Characterizing and analyzing the tribological behaviour of diamond coated tungsten carbide (WC), J Eng Res, 15107, 2022    
109. Kumar, Deepak; Pandey, SM; Murtaza, Qasim; Singh, Pushpendra; Walia, RS; Tribological analysis of increasing percentage of CrC content in composite coating by atmospheric plasma spray technique              Optimization Methods in Engineering: Select Proceedings of CPIE 2019, 99-113, 2021, Springer
110. Rizvi, Syed Wasiul Hasan; Agrawal, Saurabh; Murtaza, Qasim; Circular economy under the impact of IT tools: a content-based review, International Journal of Sustainable Engineering, 14, 87-97, 2021, Taylor & Francis
111. Srinivas, K; Murtaza, Q; Aggarwal, AK; Effect of Magnetic Pole Orientation on Viscoelastic Magnetic Abrasive Finishing Process, Advances in Electromechanical Technologies: Select Proceedings of TEMT 2019, 979-988, 2021, Springer
112. Butola, Ravi; Tyagi, Lakshay; Singari, Ranganath M; Murtaza, Qasim; Kumar, Harish; Nayak, Dhiraj;            Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing      Materials Research Express, 8, 16520, 2021, IOP  Publishing
113. Khan, Mohsin; Zunaid, Mohammad; Murtaza, Qasim; Examination of titanium powder with different particle sizes for velocity, Materials Today: Proceedings, 43, 383-387, 2021, Elsevier
114. Pandey, Rahul; Singh, Piyush; Khanna, Mahima; Murtaza, Qasim; Metal foam manufacturing, mechanical properties and its designing aspects—a review, Advances in Manufacturing and Industrial Engineering: Select Proceedings of ICAPIE 2019, 761-770, 2021, Springer
115. Jha, Manmeet; Kumar, Deepak; Singh, Pushpendra; Walia, RS; Murtaza, Qasim; Characterization of Ni-Based Alloy Coating by Thermal Spraying Process      Advances in Manufacturing and Industrial Engineering: Select Proceedings of ICAPIE 2019, 825-834, 2021, Springer
116. Khan, Mohsin; Zunaid, Mohammad; Murtaza, Qasim;     Simulation of cold spray coating for powder pre-heat and impact velocity, Materials Today: Proceedings, 46, 10837-10844, 2021, Elsevier
117. Abdalsadah, Falah Hasan; Hasan, Faisal; Murtaza, Qasim; Khan, Abid Ali;                Design and manufacture of a custom ankle–foot orthoses using traditional manufacturing and fused deposition modelling, Progress in Additive Manufacturing, 6, 555-570, 2021, Springer
118. Tyagi, Ankit; Murtaza, Qasim; Walia, Ravinderjit Singh;   Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating, Journal of Mechanical Engineering/Strojniški Vestnik, 67, 2021
119. Tyagi, Ankit; Pandey, SM; Walia, RS; Murtaza, Qasim; Kumar, Ajay;  Effect of Temperature on the Sliding Wear Composite Behavior Coating of HVOF Sprayed Al2O3, Advances in Materials and Mechanical Engineering: Select Proceedings of ICFTMME 2020, 2021, Springer
120. Tyagi, Ankit; Pandey, SM; Walia, RS; Murtaza, Qasim; Kumar, Ajay; Effect of Temperature on the Sliding Wear Behavior of HVOF Sprayed Al 2 O 3 Composite Coating   Advances in Materials and Mechanical Engineering: Select Proceedings of ICFTMME 2020, 23-28, 2021, Springer
121. Rana, Ramakant; Walia, RS; Murtaza, Qasim;       Characterization and Parametric Optimization of Performance Parameters of DLC-Coated Tungsten Carbide (WC) Tool Using TOPSIS     Coatings, 11, 760, 2021, MDPI
122. Meena, SL; Tyagi, Ankit; Murtaza, Qasim; Walia, RS; Niranjan, MS; Effect of load on the wear behaviour of Al2O3 HVOF sprayed coating   Journal of Physics: Conference Series, 1950, 12011, 2021, IOP  Publishing
123. Tyagi, Ankit; Raj, Jitendra; Chourasia, Shubhangi; Meena, SL; Pandey, SM; Murtaza, Qasim; Walia, RS; Kumar, Ajay;                 Effect of sliding velocity on the wear behavior of HVOF sprayed Al 2O 3 coating, Journal of Physics: Conference Series, 1950, 12008, 2021, IOP  Publishing
124. Dhull, Sachin; Mishra, RS; Walia, RS; Murtaza, Q; Niranjan, MS;   Innovations in Different Abrasive Flow Machining Processes: A Review, Journal of Physics: Conference Series, 1950, 12048, 2021, IOP  Publishing
125. Abdulsadah, Falah Hasan; Murtaza, Qasim; Hasan, Faisal; Bhardwaj, Siddharth; Varshney, Mehul; Shaiban, Marwan; Design and Analysis of Partial Right Foot Chopart Socket Prosthesis, Ergonomics for Improved Productivity: Proceedings of HWWE 2017, 793-798, 2021, Springer
126. Tyagi, Ankit; Murtaza, Qasim; Walia, RS; Evaluation of the residual stress of HVOF sprayed carbon coating after wear testing conditions using ANN coupled Taguchi approach, Surface Topography: Metrology and Properties, 9, 35027, 2021, IOP  Publishing
127. Dhull, Sachin; Walia, RS; Murtaza, Qasim; Niranjan, MS;                 Experimental, Computational and Mathematical Analysis of Hybrid Abrasive Flow Machining Process, International Journal of Precision Engineering and Manufacturing, 22, 1657-1680, 2021         Korean Society for Precision Engineering
128. Vishnoi, Mohit; Kumar, Paras; Murtaza, Qasim;                 Surface texturing techniques to enhance tribological performance: A review, Surfaces and Interfaces, 27, 101463, 2021, Elsevier
129. Tyagi, Ankit; Chourasia, Shubhangi; Murtaza, Qasim; Walia, RS; Evaluation of tribological, oxidation and corrosion behavior of HVOF sprayed sustainable temperature-dependent carbon coating                Surface Topography: Metrology and Properties, 9, 45024, 2021, IOP  Publishing
130. Ramakant, Rana; Walia, Lucky Krishnia RS; Murtaza, Qasim; CVD diamond coated tungsten carbide (WC) tool inserts, J Eng Res, ICARI, 15319, 2021      
131. Rana, R; Walia, RS; Murtaza, Q; Characterization and Parametric Optimization of Performance Parameters of DLC-Coated Tungsten Carbide (WC) Tool Using TOPSIS. Coatings 2021, 11, 760, 2021, Note: MDPI stays neutral with regard to jurisdictional claims in published
132. Tyagi, Ankit; Pandey, SM; Murtaza, Qasim; Walia, RS; Tyagi, Mohit; Tribological behavior of carbon coating for piston ring applications using Taguchi approach               Materials Today: Proceedings, 25, 759-764, 2020, Elsevier
133. Ali, Parvesh; Pandey, SM; Ranganath, MS; Walia, RS; Murtaza, Qasim; Experimentation and modelling of CNT additive abrasive media for micro finishing, Measurement, 151, 107133, 2020, Elsevier
134. Srivastava, Sharat Chandra; Murtaza, Qasim; Kumar, Paras;         Microwave cladding on metallic surfaces: A review                Materials Today: Proceedings, 21, 1533-1536, 2020, Elsevier
135. Tyagi, Ankit; Pandey, SM; Walia, RS; Murtaza, Qasim; Mishra, RS; Characterization and parametric optimization of% change in residual stress of Mo composite coating using Taguchi approach, Materials Research Express, 6, 125623, 2020       , IOP  Publishing
136. Srinivas, Krovvidi; Murtaza, Quasim; Aggarwal, AK; Simulation of Flow Parameters and Magnetic Forces in Machining of Internal Cam through Viscoelastic Magnetic Abrasive Flow Finishing Process, International Conference of Advance Research & Innovation (ICARI), 2020
137. Ramakant Rana, Qasim Murtaza, R.S. Walia; GA based optimization of tri-bological behaviour of diamond coated tungsten carbide              World Journal of Engineering, 2020, Emerald
138. Ali, Parvesh; Walia, RS; Murtaza, Qasim; Singari, Ranganath Muttanna;   Material removal analysis of hybrid EDM-assisted centrifugal abrasive flow machining process for performance enhancement, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 2020, Springer
139. Vishnoi, Mohit; Kumar, Paras; Murtaza, Qasim;                 A Review on Coating for Hydro-turbine Application by HVOF Process                Advances in Materials Engineering and Manufacturing Processes, 79-103, 2020  , Springer
140. Ravi, Butola; Qasim, Murtaza; Ranganath, M Singari;  Formation of Self-Assembled Monolayer and Characterization of AA7075-T6/B4C Nano-ceramic surface composite using Friction Stir Processing              Surface Topography: Metrology and Properties, 2020, IOP  Publishing
141. Dhull, Sachin; Murtaza, Qasim; Walia, RS; Niranjan, MS; Vats, Saloni;       Abrasive Flow Machining Process Hybridization with Other Non-Traditional Machining Processes: A Review, Proceedings of International Conference in Mechanical and Energy Technology: ICMET 2019, India, 101-109, 2020, Springer
142. Butola, Ravi; Tyagi, Lakshay; Kem, Luckshaya; Ranganath, MS; Murtaza, Qasim; Mechanical and wear properties of aluminium alloy composites: a review    Manufacturing Engineering: Select Proceedings of CPIE 2019       , 369-391, 2020, Springer
143. Kumar, Deepak; Pandey, SM; Murtaza, Qasim; Singh, Pushpendra; Walia, RS;     Tribological Analysis of Increasing Percentage of CrC Content in Composite              Optimization Methods in Engineering: Select Proceedings of CPIE 2019, 99, 2020, Springer
144. Ali, Parvesh; Walia, RS; Murtaza, Qasim; Ranganath, MS; Modeling and analysis of developed Thermal additive Centrifugal Abrasive Flow Machining process      Surface Topography: Metrology and Properties, 8, 35013, 2020, IOP  Publishing
145. Butola, Ravi; Singari, Ranganath M; Murtaza, Qasim;       Mechanical and wear behaviour of friction stir processed surface composite through self-assembled monolayer technique, Surface Topography: Metrology and Properties, 8, 45007, 2020, IOP  Publishing
146. Singh, Shailesh Kumar; Chattopadhyaya, Somnath; Pramanik, Alokesh; Kumar, Sanjeev; Basak, Animesh K; Pandey, Shailesh M; Murtaza, Qasim; Legutko, Stanislaw; Litak, Grzegorz; Tribological properties of chromium nitride on the cylinder liner under the influence of high temperature, Materials, 13, 4497, 2020, MDPI
147. Butola, Ravi; Murtaza, Qasim; Singari, Ranganath Muttana; An experimental and simulation validation of residual stress measurement for manufacturing of friction stir processing tool, Indian Journal of Engineering and Materials Sciences, 27        , 826-836, 2020  NISCAIR-CSIR, India
148. Rana, Ramakant; Murtaza, Qasim; Walia, Ravinderjit Singh; Optimization using genetic algorithm of tribological behaviour of WC tool material   Indian Journal of Engineering and Materials Sciences, 27, 889-896, 2020, NISCAIR-CSIR, India
149. Mohit, Vishno; Qasim, Murtaza; Paras, Kumar;   Effect of rare earth elements on coatings developed by thermal spraying processes (TSP) – A brief review, Materials Today: Proceedings, 2020, Elsevier
150. Tyagi, Ankit; Pandey, SM; Murtaza, Qasim; Walia, RS;     Effect of Temperature on Mo–C Blend Composite Coating for Piston Ring Applications         Advanced Science, Engineering and Medicine, 12, 1077-1079, 2020,          American Scientific Publishers
151. Nambiar, Amal; Kumar, Arul; Chopra, Rohan; Zunaid, M; Murtaza, Qasim;  Nozzle Design for Intake Manifold for KTM 500 EXC Engine       International Conference on Recent Advancements in Mechanical Engineering, 371-383, 2020, Springer
152. Mustafa, Sameen; Ansari, Mubashshir Ahmad; Murtaza, Qasim;               A Study on Comfort in Higher Education, International Conference on Recent Advancements in Mechanical Engineering, 1037-1044           , 2020, Springer
153. Singh, Vishal; Qasim Murtaza, Dr Saurabh Agrawal;          Study Of Residual Stresses And Surface Roughness In Cnc Milling Of Aisi 202 Steel, Solid State Technology, 7451-7465, 2020
154. Tyagi, Ankit; Walia, RS; Murtaza, Qasim; Pandey, Shailesh M; Tyagi, Pawan K; Bajaj, Bharat; A critical review of diamond like carbon coating for wear resistance applications, International journal of refractory metals and hard materials,            78, 107-122, 2019, Elsevier
155. Ankit, Tyagi; Shailesh Mani, Pandey; R.S, Walia; Qasim, Murtaza; Characterization and parametric optimization of tribological properties of Mo blend composite coating, Materials Research Express, 2019, IOP  Science publishing
156. Bhardwaj, Anant; Ali, Parvesh; Walia, RS; Murtaza, Qasim; Pandey, SM;                 Development of hybrid forms of abrasive flow machining process: a review, Advances in Industrial and Production Engineering: Select Proceedings of FLAME 2018, 41-67, 2019, Springer
157. Tyagi, Ankit; Walia, RS; Murtaza, Qasim; Tribological behavior of temperature dependent environment friendly thermal CVD diamond coating, Diamond and Related Materials  96, 148-159, 2019,            Elsevier
158. Srinivas, K; Murtaza, Q; Aggarwal, AK;    Variation of flow parameters and Magnetic flux in Viscoelastic Magnetic Abrasive Finishing Process           International Journal of Applied Engineering Research, 14, 1940-1946, 2019         
159. Singhal, Chirag; Murtaza, Qasim; Alam, Parvej; Hasan, Faisal;       Structural and mechanical properties of microwave hybrid sintered aluminium silicon carbide composite       Advances in Materials and Processing Technologies, 5, 559-567, 2019, Taylor & Francis
160. Abdulsadah, FH; Murtaza, Q; Hasan, F; Bhardwaj, S;        Mechanical suitability of carbon fiber based composite for chopart prosthetic socket, Journal of Physics: Conference Series, 1240, 12154, 2019, IOP  Publishing
161. Butola, Ravi; Murtaza, Qasim; Singari, Ranganath M;       CNC turning and simulation of residual stress measurement on H13 tool steel              Advances in Computational Methods in Manufacturing: Select Papers from ICCMM 2019, 337-348, 2019,   Springer
162. Faheem, Abdul; Hasan, Faisal; Murtaza, Qasim;                 Material perspective and deformation pattern of micro-sized metallic particle using cold gas dynamic spray          Advances in Computational Methods in Manufacturing: Select Papers from ICCMM 2019, 393-401, 2019, Springer
163. Butola, Ravi; Ranganath, MS; Murtaza, Qasim;   Fabrication and optimization of AA7075 matrix surface composites using Taguchi technique via friction stir processing (FSP), Engineering Research Express, 1, 25015, 2019, IOP  Publishing
164. Tyagi, Ankit; Walia, RS; Murtaza, Qasim; Tribological behavior of HVOF carbon coating for wear resistance applications, Materials Research Express, 6, 125606, 2019, IOP  Publishing
165. Srinivas, K; Murtaza, Q; Aggarwal, AK;    Effect of permanent magnetic pole orientation on-field strength in viscoelastic magnetic abrasive finishing process, International Journal of Mechanical and Production Engineering Research and Development, 9, 43-52, 2019         
166. Tyagi, Ankit; Pandey, SM; Gupta, Kalpna; Walia, RS; Murtaza, Qasim; Krishen, Kumar; Tribological behavior of sustainable carbon based composite coating for wear resistance applications, Materials Research Express, 6, 125601, 2019, IOP  Publishing
167. Dhull, Sachin; Walia, Ravinderjit Singh; Murtaza, Qasim; Singh, Mahendra; Electrochemo-magneto abrasive flow machine setup fabrication and experimental investigation of the process alongwith mathematical modeling and optimization, Independent Journal of Management & Production, 10, 1834-1849, 2019   Instituto Federal de Educação, Ciência e Tecnologia de São Paulo (IFSP)
168. Srinivas, Krovvidi; Murtaza, Q; Aggarwal, AK; Modelling Of Viscoelastic Fluid In Finishing Processes, International journal of scientific & technology research, 8, 2019          
169. Butola, Ravi; Malhotra, Aahan; Yadav, Mukesh; Singari, Ranganath; Murtaza, Qasim; Chandra, Prakash; Experimental studies on mechanical properties of metal matrix composites reinforced with natural fibres ashes, 2019       SAE Technical Paper
170. Butola, Ravi; Singari, Ranganath M; Murtaza, Qasim;       A review on surface modification of aluminium alloy using friction stir processing’  International Journal for Research in Applied Science & Engineering Technology, 7, 2085-2090, 2019          
171. Tyagi, Ankit; Walia, RS; Murtaza, Qasim;                Effect of High-Temperature (550° C) on Tribological Properties of Eco-Friendly Carbon-Based Composite Coating for Piston Ring Application, ITSC2019, 688-694, 2019, ASM International
172. Srinivas, K; Murtaza, Q; Aggarwal, AK;    Effect of Shape of Magnet on the Machining of Workpiece, International Journal of Recent Technology and Engineering (IJRTE), ISSN, 2277-3878, 2019     
173. Anant, Bhardwaj; Parvesh, Ali; Walia, RS; Qasim, Murtaza; Pandey, SM;                 Development of Hybrid Forms of Abrasive Flow Machining Process: A Review. K. Shanker et al.(eds.), Advances in Industrial and Production Engineering, Lecture Notes in Mechanical Engineering, 41-67, 2019, Springer      
174. Kumar, Satyajeet; Singh, Shailesh Kumar; Kumar, Jayshankar; Murtaza, Qasim; Synthesis and Characterization of Al-alloy by Mechanical alloying, Materials Today: Proceedings, 5, 3237-3242, 2018, Elsevier
175. Butola, Ravi; Jain, Rishabh; Bhangadia, Priyesh; Bandhu, Ashwani; Walia, RS; Murtaza, Qasim;     Optimization to the parameters of abrasive flow machining by Taguchi method, Materials Today: Proceedings, 5, 4720-4729, 2018, Elsevier
176. Ashraf, Masood; Hasan, Faisal; Murtaza, Qasim;                Optimum machines allocation in a serial production line using NSGA-II and TOPSIS, Precision Product-Process Design and Optimization: Select Papers from AIMTDR 2016, 411-434, 2018     Springer
177. Agrawal, Saurabh; Singh, Rajesh K.; Murtaza, Qasim; Reverse supply chain issues in Indian electronics industry: a case study, Journal of Remanufacturing, 2018
178. Pandey, Shailesh Mani; Murtaza, Qasim; Walia, RS; Effect of NiCr on dry sliding wear of high carbon iron-molybdenum composite plasma spray coating, International Journal of precision Technology, 8, 2018, Inderscience Publishers (IEL)
179. Singhal, Chirag; Murtaza, Qasim; Simulation of critical velocity of cold spray process with different turbulence models, Materials Today: Proceedings, 5, 17371-17379, 2018, Elsevier
180. Singhal, Chirag; Murtaza, Qasim; Microwave sintering of advanced composites materials: a review, Materials Today: Proceedings, 5, 24287-24298, 2018, Elsevier
181. Dhull, Sachin; Walia, RS; Murtaza, Q; Niranjan, MS; Development of Different Polymer Media and Experimental Investigation of Abrasive Flow Machining Process, International Journal of Engineering Research and Technology, 11, 1015-1024, 2018        
182. Ali, PARVESH; Walia, RS; Murtaza, QASIM; Ranganath, MS; Enhancement of surface integrity using spark assisted abrasive flow machining process, Int. J. Mech. Prod. Eng. Res. Dev.(IJMPERD), 8, 635-642, 2018
183. Singhal, Chirag; Murtaza, Qasim; Numerical Study Using Nano-Particles by Varying the Expansion Ratio and Height of Cold Spray Nozzle to Predict Deposition Efficiency       ITSC2018, 286-293, 2018, ASM International
184. Gaurav, G; Murtaza, Q; Yuvraj, N; Mandal, D; Sahoo, KL; Murmu, L; Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg–Al–Zn–Sn–Pb alloy system, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231, 627-637, 2017, SAGE
185. Niranjan, MS; Singh, Krishna Pratap; Murtaza, Qasim;     Characterization of magnetic abrasive particles based Magnetorheological polishing fluid, Materials Today: Proceedings, 4, 752-757, 2017, Elsevier
186. Ravi, Butola; Qasim, Murtaza; R.S., Walia; Pradeep, kumar; Two start and Three Start Helical Abrasive Flow Machining for Brittle Materials   Materials Today: Proceedings, 4, 3685–3693, 2017, Elsevier
187. Zunaid, Mohammad; Murtaza, Qasim; Gautam, Samsher; Energy and performance analysis of multi droplets shower cooling tower at different inlet water temperature for air cooling application, Applied Thermal Engineering, 121, 1070-1079, 2017,  Pergamon
188. Pandey, Shailesh Mani; Murtaza, Qasim; Walia, RS; Study of dry wear behavior and morphological characteristic of 60% Mo-20% NiCr-10% CrC-10% Mo+ Fe based alloy coating by atmospheric plasma spray technique, Advances in Materials and Processing Technologies, 3, 393-406, 2017, Taylor & Francis
189. Ali, Parvesh; Dhull, Sachin; Walia, RS; Murtaza, Qasim; Tyagi, Mohit;        Hybrid abrasive flow machining for nano finishing-a review, Materials Today: Proceedings, 4, 7208-7218, 2017, Elsevier
190. Hassan, Falah; Murtaza, Qasim; Bhardwaj, Siddharth;     Manufacture, Design and Structural Analysis of a Custom Ankle Foot Orthoses on Foot Drop Patients Using 3D Scanning, International Journal of Scientific & Engineering Research, 8, 97-99, 2017, IJSER
191. Meena, Shanti Lal; Butola, Ravi; Murtaza, Qasim; Jayantilal, Hardik; Niranjan, MS; Metallurgical Investigations of Microstructure and Micro hardness across the various zones in Synergic MIG Welding of Stainless steel, Materials Today: Proceedings, 4, 8240-8249, 2017, Elsevier
192. Zunaid, M; Murtaza, Q; Samsher, G; Energy and second law of thermodynamics analysis of shower cooling tower with variation in inlet air temperature    International Journal of Engineering, 30,  1090-1097, 2017, Materials and Energy Research Center
193. Murtaza, Qasim; Pandey, SM; Niranjan, MS; A novel manufacturing route for automobile parts through two-wire-arc thermal spray process, Materials and Manufacturing Processes, 31, 1424-1432, 2016, Taylor & Francis
194. Kumar, Dalip; Murtaza, Qasim; Singh, RC; Sliding wear behavior of aluminum alloy coating prepared by two-wire electric arc spray process              The International Journal of Advanced Manufacturing Technology, 85, 237-252                2016, Springer
195. Agrawal, Saurabh; Singh, Rajesh K; Murtaza, Qasim; Prioritizing critical success factors for reverse logistics implementation using fuzzy-TOPSIS methodology, Journal of Industrial Engineering International, 12, 15-27, 2016, Springer
196. Agrawal, Saurabh; Singh, Rajesh K; Murtaza, Qasim; Outsourcing decisions in reverse logistics: Sustainable balanced scorecard and graph theoretic approach, Resources Conservation and Recycling, 108, 41-53, 2016, Elsevier
197. Kumar, Sonu; Murtaza, Q; Walia, RS; Dhull, S; Tyagi, PK;                 Synthesis CNTs Particle Based Abrasive Media for Abrasive Flow Machining Process             IOP  Conference Series: Materials Science and Engineering, 115, 12034, 2016, IOP  Publishing
198. Agrawal, Saurabh; Singh, Rajesh Kr; Murtaza, Qasim; Triple bottom line performance evaluation of reverse logistics, Competitiveness Review, 26, 289-310, 2016, Emerald
199. Agrawal, Saurabh; Singh, Rajesh K; Murtaza, Qasim; Disposition decisions in reverse logistics: Graph theory and matrix approach, Journal of Cleaner Production, 137, 93-104, 2016, Elsevier
200. Agrawal, Saurabh; Singh, Rajesh K; Murtaza, Qasim; Disposition decisions in reverse logistics by using AHP-fuzzy TOPSIS approach, Journal of Modelling in Management, 11, 932-948, 2016, Emerald        
201. Agrawal, Saurabh; Singh, Rajesh K.; Murtaza, Qasim; A literature review and perspectives in reverse logistics                Resources, Conservation and Recycling, 97, 76–92, 2015                , Elsevier
202. Singla, Devanshu; Amulya, Kaza; Murtaza, Qasim; CNT reinforced aluminium matrix composite-a review                Materials Today: Proceeding, 2,                2886-2895, 2015, Elsevier
203. Abidi, Syed Sibte Asghar; Murtaza, Qasim; Synthesis and characterization of nano-hydroxyapatite powder using wet chemical precipitation reaction, Journal of Materials Science & Technology, 30, 307-310, 2014, Elsevier
204. Agrawal, Saurabh; K. Singh, Rajesh; Murtaza, Qasim;      Forecasting product returns for recycling in Indian electronics industry, Journal of Advances in Management Research, 11, 102-114, 2014, Emerald
205. Kumar, Rahul; Murtaza, Qasim; Walia, R.S.; Three Start Helical Abrasive Flow Machining For Ductile Materials, Procedia Materials Science, 6, 1884–1890, 2014, Elsevier
206. Murtaza, Q; Stokes, J; Ardhaoui, M; Experimental analysis of spray dryer used in hydroxyapatite thermal spray powder, Journal of thermal spray technology, 21, 963-974, 2012, Springer

Book

Surface Engineering Methods and Applications, Edited: R.S. Walia, Qasim Murtaza, Shailesh Mani Pandey, Ankit Tyagi, CRC Press, 2022

Awarded: Indian Patent Application No. 202011001827 filed on January 15, 2020

          PARVESH ALI, R.S. WALIA INDIAN, QASIM MURTAZA, RANGANATH M.S.

Entitled: ‘THERMAL ADDITIVE CENTRIFUGAL ABRASIVE FLOW MACHINING AND METHOD THEREOF’

 

Published: 1. PATENT APPLICATION No.202511006278 A (19) INDIA  (22) Date of filing of Application:25/01/2025 (43) Publication Date: 14/02/2025

“THE DEVELOPMENT OF A COST-EFFICIENT BITE-FORCE & BODY TEMPERATURE MEASUREMENT DEVICE INTEGRATED WITH AN INFRARED TEMPERATURE SENSOR”

                2.  PATENT APPLICATIO No.202511016360 A (19) INDIA (22) Date of filing of Application:25/02/2025 (43) and Publication Date: 14/03/2025

“INVESTIGATION AND MULTI-RESPONSE OPTIMIZATION OF PROCESS PARAMETERS FOR COLD METAL TRANSFERWIRE ARC ADDITIVE MANUFACTURING OF SS316L SAMPLES”

S.No.	Name of Award	Awarding Agency	Year
1	Commendable Research Award, Yearly Citation Award	Delhi Technological University	2025
2	Commendable Research Award, Yearly Citation Award Cumulative Citation Award	Delhi Technological University	2024
3	Commendable Research Award	Delhi Technological University	2018-2024
4	Best Paper Award in ICCMM2019, IITG	Springer	2019
5	Resources, Conservation & Recycling-Award	Elsevier	2018
6	Emerald Literari Award Highly	Emerald Publications	2015

Project Co-PI:  DST, Innovation and Technology Foundation at IIT Bhilai (IBITF) Award on April 2024 with IIT Jodhpur, NIT Patna and RTU, Kota (Amount Rs78 lacs) for Knowledge Transfer “Empowering Indigenous Bastar Art for Socio-economic Upliftment of ST Communities of Chhattisgarh”

Faculty Advisor:

Team Defnaiz

DTU Consulting Group