Dr. Pushpendra Singh

Prof. Pushpendra Singh is an academic researcher working in the field of mechanical engineering, with almost two decades of experience blending academic research and industry practice, Prof. Singh stands out for his commitment to sustainable technological advancement and fostering innovation in engineering education. His specialization in thermal engineering acts as an anchor for both his teaching as well as research, enabling him to address contemporary issues in energy, environment, and thermo-mechanical systems with depth and innovation. He has  supervised many doctoral thesis, postgraduate and under Graduate dissertations, contributing significantly to research in sustainable mechanical engineering domain.  He has guided multiple research projects and doctoral candidates, notably in the field of Thermal Energy storage systems, Solar Energy, semi conductor PV cell research, Bio Diesel, nano biofuels and emission control in internal combustion engines, demonstrating leadership in applied research for real-world challenges. His current area of research interest includes sustainable development, Net Zero emmision technologies, energy transition, thermal energy storage, PV cells, renewable energy technologies, alternative cooling technologies and thermal systems.

Delhi Technological University Professor - Department of Mechanical Engineering, DTU - Since 04 July 2015 till date. Associate Professor - Department of Mechanical Engineering, DTU - from 04 July 2012 till 03 July 2015..

1. Clean Energy

2. Non Conventional Energy Resources

3. Green Energy Technology

4. Thermal Engineering I

5. Thermal Engineering II

6. Power Plant Engineering

7. Refrigeration and Air Conditioning

8. Energy Storage Systems

ISCA (Life Member),

Senior Member (ISME),

FSIESRP (Life Member),

                 Research articles published – Journals

1. A. S. Sikarwar, N. A. Ansari And P. Singh; “Current Scenario and Future Perspectives of Renewable and Sustainable Energy in India: Progress and Its Challenges”; J. Environmental Nanotechnology, VOL. 13(1), 172-182 (2024); DOI Https://Doi.Org/10.13074/jent.2024.03.241524 -SCOPUS Indexed
2. Jayesh Kumar, Pushpendra Singh, Rajesh Kumar; “Enhancement of The Part-Load Thermal Charging Performance of a Latent Heat Thermal Energy Storage Unit with Variable Length Fins at Effective Locations”; Renewable Energy Focus; Volume-43, (2022) Page 130-145, DOI Https://Doi.Org/10.1016/J.Ref.2022.09.005; ESCI Indexed.
3. Jayesh Kumar, Pushpendra Singh, Rajesh Kumar, Performance Enhancement of Latent Heat Storage Unit By The Multiple Chambers; Wiley Energy Storage; E446 (2023), DOI Https://Doi.Org/10.1002/Est2.446; ESCI Indexed
4. Y Singh, V Yadav, U Sahoo, A Malan, A K Tripathi, R Kumar, Pushpendra Singh & C Banerjee; “Experimental Investigation Of An Innovative Solar Dryer Integrated With The Thermal Energy Storage System”; Taylor & Francis International Journal Of Ambient Energy, DOI: 10.1080/01430750.2023.2199759; 2023.SJR Indexed
5. Suraj Bhan, Raghvendra Gautam, Pushpendra Singh; “An Experimental Assessment Of Combustion, Emissions, And Performance Behavior Of Diesel Engine Fueled With New Developed Biofuel Blend Of Two Distinct Waste Cooking Oils And Metallic Nano-Particle (Al2o3)” ; Scientia Irancia, Transaction on Mechanical Engineering (B);2022; Impact Factor: 1.435; DOI:10.24200/SCI.2022.58882.5947; (SCI Indexed)
6. Suraj Bhan, Raghvendra Gautam, Pushpendra Singh; “Analyzing The Impact Of Adding Aluminum Oxide And Cerium Oxide Nanoparticles To Waste Cooking Biodiesel On Engine Performance, Combustion And Emissions Characteristics”; Petroleum Science And Technology (Taylor And Francis);2022; Impact Factor:1.695; Https://Doi.Org/10.1080/10916466.2022.2136705; SCI Indexed
7. Neeraj Kant, Pushpendra Singh; Review Of Next Generation Photovoltaic Solar Cell Technology And Comparative Materialistic Development; Materials Today: Proceedings56 (2022) 3460–3470;IF 3.2; DOI Https://Doi.Org/10.1016/J.Matpr.2021.11.116. Scopus indexed
8. Manish Sanserwal Pushpendra Singh; “Techno-Economic And Enviro-economic Analysis Review Of Distinct Passive And Active Solar Distillation Still”; Dergipark International Journal of Thermodynamics; Year 2022, Volume: 25 Issue: 3, 75 – 95; Issue-1-21, DOI Https://Doi.Org/10.5541/Ijot.1012365; ESCI Indexed
9. Suraj Bhan, Raghvendra Gautam, Pushpendra Singh; “Application Of Response Surface Approach To Optimize Ci Engine Parameters fueled By Newly Developed Waste Cooking Biodiesel Infused With Al₂O₃ Nanoparticles”: Environmental Progress & Sustainable Energy;2023; Impact Factor 2.824 ; DOI: 10.1002/ep.14151; SCI Indexed
10. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh. “Effect Of Process Parameters On Surface Roughness, Dimensional Accuracy And Flatness Of Vero blue RGD840 Rigid Opaque Materials Produced By Polyjet”, De Gruyter Int. J. Mater. Res. 2022; 113(11): 935–950; Impact Factor 2.33; https://doi.org/10.1515/ijmr-2020-8059; SCIE Indexed
11. Deepak Kumar, Qasim Murtaza, R. S. Walia, And Pushpendra Singh. "Comparative Investigation On Thermally Sprayed Al2o3, Al2o3–13%(Tio2) And Al2o3–40%(Tio2) Composite Coatings From Room To 400° C Temperature."; IOP Publications Surface Topography: Metrology And Properties; Vol 10, No. 1 (2022): 015043., With Impact Factor 2.185; DOI 10.1088/2051-672X/ac5a75 ; SCIE Indexed
12. Shilpi Ahluwalia, Amrit Pal Toor, Pushpendra Singh & Jai Gopal Sharma (2022): “Parametric Optimization For Detoxification Of Non-Oil Jatropha Residual Material Using Taguchi Method”; Advances In Materials And Processing Technologies (T&F), DOI: 10.1080/2374068X.2022.2095756. ESCI Indexed
13. Deepak Kumar, R. S. Walia, Pushpendra Singh And Qasim Murtaza; Tribological Behavior Of Thermally Sprayed Ceramic Coating At High Temperature;2022; International Journal Of Material Research (De Gruyter Publication); Impact Factor 0.678; Doi: 10.1515/Ijmr-2022-0318. SCIE Indexed
14. Ahluwalia, S., Bidlan, R., Singh, P. And Sharma, J. G., “Optimization Of Protein Extraction From Detoxified Jatropha Seed Cake Using Response Surface Methodology And Amino Acid Analysis.”; International Journal Of Environmental Science And Technology, (Springer Berlin Heidelberg); 2019; ISSN 1735-1472; SCI Indexed.
15. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh: “Experimental And Computational Analysis Of Mechanical Properties Of Rgd840 Material Manufactured Through Polyjet Process”; Rapid Prototyping Journal; Impact Factor  3.095: ISSN: 1355-2546: 2020: [DOI 10.1108/RPJ-03-2020-0049] SCIE Indexed
16. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh (2020), “An Overview Of Mechanical Properties And Form Error In Rapid Prototyping”, CIRP Journal Of Manufacturing Science And Technology. Https://Doi.Org/10.1016/J.Cirpj.;2020 (Impact Factor 2.33) (SCIE Indexed).
17. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh; “Fabrication Of Prototype Connecting Rod Of PLA Plastic Material Using FDM Prototype Technology”. Indian Journal Of Engineering & Material Science. 2020; (Impact Factor 0.794); DOI: 10.56042/ijems.v27i2.45964 SCIE Indexed.
18. Shilpi Ahluwalia, Jai Gopal Sharma And Pushpendra Singh. “Modeling And Analysis Of Critical Factors For Phorbol Ester Degradation In Jatropha Seed Cake Using Ism And Micmac”;2018; International Journal Of Environment And Waste Management. DOI: 10.1504/IJEWM.2018.093437. ESCI indexed
19. Shilpi Ahluwalia, Rajkumar Bidlan, Jai Gopal Sharma, Pushpendra Singh; “Review On Phorbol Ester Degradation Of Jatropha Seed Cake For Its Use As Animal Feed”; 2017; International Journal Of Pharmacy And Pharmaceutical Sciences; VOL 9, ISSUE 1, 2017, ISSN- 0975-1491.
20. Rahul Yadav, Rahul Kumar Sah, Pulkit Mann, Deepak Kumar, And Pushpendra Singh. "Study Of Thermal Conductivity Of NiCrFeSi Based Ceramic Composite Coating." Optimization Of Industrial Systems (2022): 545-553; https://doi.org/10.1002/9781119755074.ch42
21. Raviratna Subir, Rishabh Goswami, Vikrant Singh, Deepak Kumar, And Pushpendra Singh. "Construction And Validation Of A Low-Cost Thermal Conductivity Measurement Device.";  Advances In Mechanical Engineering And Technology, Pp. 419-427; Springer (2022); https://doi.org/10.1007/978-981-16-9613-8_38
22. Harsh Vardhan, Gaurav Kumar Netam, Jayant, Pushpendra Singh; “Transient State Thermal Analysis Of A 4 Stroke CI Engine Piston”; International Research Journal Of Engineering And Technology (IRJET); VOLUME: 10 ISSUE: 04 | 2023; E-ISSN: 2395-0056
23. S. Kumar, Q. Murtaza, P. Singh, And R. Datta, “A Critical Review On Dissimilar Metals Joining Using Cold Metal Transfer Welding”; Vol. 20, No. 7, Pp. 1896–1906, 2022, DOI: 10.14704/NQ.2022.20.7.NQ33238. Scopus indexed
24. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh (2019), “Comparative Study Of 3d Printing Technology For Rapid Prototyping Of Automotive Component”; Instrumentation Mesure Métrologie; Vol. 18, Issue 4: Pp. 353-359; Https://Doi.Org/10.18280/I2m.180404; SNIP IF- 0.91
25. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh; “Experimental And Computational Investigation On Mechanical Properties Of Reinforced Additive Manufactured Component”; Evergreen Joint Journal Of Novel Carbon Resource Sciences & Green Asia Strategy; (2019); VOL. 06, ISSUE 03 PP. 207-214 ; IF: 0.41. SNIP
26. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh; “Investigation Of Dimensional Accuracy And International Tolerance Grades Of 3d Printed Polycarbonate Parts”; Materials Today: Proceedings; (2020): IF: 3.2; Https://Doi.Org/10.1016/J.Matpr.2019.06.007. Scopus indexed
27. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh; “An Experimental Investigations For Improving Part Strength In Fused Deposition Modeling”; International Journal Of Engineering & Technology; (2018);  VOL. 7 ISSUE (4.39): PP. 457-461; (SCIMAGO JOURNAL RANK (SJR): 0.17).
28. Ravi Kumar, A. Nait Salah, Neeraj Kant, Pushpender Singh, Abdul Wahab Hashmi, Chandrabhanu Malla; “Effect Of FSW Process Parameters On Mechanical Properties And Microstructure Of Dissimilar Welded Joints Of Aa2024 And Aa6082” Materials Today: Proceedings ; 2021; https://doi.org/10.1016/j.matpr.2021.09.007. Scopus indexed.
29. Harwinder Singh , Dr. Pushpendra Singh “An Experimental Appraisal On The Efficacy Of MWCNT-H2O Nanofluid On The Performance Of Solar Parabolic Trough Collector”, Journal Of Fundamentals Of Renewable Energy And Applications, DOI: 10.4172/2090-4541.1000200, VOLUME 6, ISSUE 1, 2016, ISSN: 2090-4541.
30. Shilpi Ahluwalia, Rajkumar Bidlan, Tanya Saxena, Shreya Dhamija, Satish Kumar, Pushpendra Singh, Jaigopal Sharma.  “Effect Of Raw, Defatted And Detoxified Jatropha Seed Cake On Germination Of Green Gram (Vigna Radiata)”, International Journal For Research In Applied Science Engineering Technology. 2018; 6(1): 1033-1041.
31. Shilpi Ahluwalia, Rajkumar Bidlan, Jai Gopal Sharma, Pushpendra Singh. “Review On Phorbol Ester Degradation Of Jatropha Seed Cake For Its Use As Animal Feed”, International Journal Of Pharmacy And Pharmaceutical Sciences 2017; 9(1):7-13. DoI: Http://Dx.Doi.Org/10.22159/Ijpps.2017v9i1.15380; Scopus indexed
32. Shilpi Ahluwalia, Jai Gopal Sharma And Pushpendra Singh. “Degradation Of Phorbol Esters In Jatropha Seed Cake By Pseudomonas Aeruginosa Ds1”, International Journal Of Pharmacy And Bio Sciences 2017; 8(2): 542-546. ISSN 0975-6299; DOI: http://dx.doi.org/10.22376/ijpbs.2017.8.2.b542-546
33. Manish Sanserwal, Ashok Kumar Singh, Dr. Pushpendra Singh; Impact Of Materials And Economic Analysis Of Single Slope Single Basin Passive Solar Still: A Review; Material Today: Proceedings; Https://Doi.Org/10.1016/J.Matpr.2019.11.289. IF 3.2; Scopus indexed
34. Sanserwal, M., Singh, P. (2021). “Single Slope Single Basin Active Solar Still Integrated with ETCs: A Review”. In: Kumar, A., Pal, A., Kachhwaha, S.S., Jain, P.K. (eds) Recent Advances in Mechanical Engineering. ICRAME 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9678-0_10
35. Manmeet Jha, Deepak Kumar, Pushpendra Singh, R.S. Walia, Qasim Murtaza; Characterization Of Ni-Based Alloy Coating By Thermal Spraying Process; Advances In Manufacturing And Industrial Engineering, Lecture Notes In Mechanical Engineering; Springer Nature Singapore Pte Ltd. 2021; Pp 825-834; Https://Doi.Org/10.1007/978-981-15-8542-5_72.
36. Singh, P.; Technological Review of The Geothermal Energy Systems from Indian Perspective; International Journal of Mechanics and Thermodynamics. Volume 6, Number 1 (2015), Pp. 23-32; ISSN 2278-361x
37. Singh, P.; Green Approach for Comfort Cooling in Domestic Application; International Journal of Mechanics and Thermodynamics. Volume 6, Number 1 (2015), Pp. 17-21; ISSN 2278-361x
38. Singh, P.; Alternate System for Car Cabin Comfort Cooling-Solar Powered; International Journal of Mechanics and Thermodynamics. Volume 6, Number 1 (2015), Pp. 11-16; ISSN 2278-361x
39. Harwinder Singh , Dr. Pushpendra Singh; “A Review Paper on Performance Improvement of Parabolic Trough Collector System”; Journal of Applied Mechanical Engineering, Volume 4, Issue 2, 2015; ISSN:2168-9873
40. Harwinder Singh , Dr. Pushpendra Singh; “A Review About Solar Thermal Power Technology And Its Use In India”; International Journal Of Research (IJR) ; Vol-1, Issue-8, September 2014; ISSN 2348-6848.
41. Vats, S., Singh, P.; “Theoretical Investigation Of The Torrefaction Process And The Enhanced Properties Of The Torrefied Fuel” International Journal Of Advance Research And Innovations; Vol 2, (1-5), 2013; ISSN23473258,
42. Vats, S., Singh, P.; “Theoretical Implementation Of Torrefied Biomass As A Fuel In The Gasification Process” International Journal Of Advance Research And Innovations; Vol 2, (1-5), 2013; ISSN 23473258,
43. Rajput, S.P.S., Singh, P.; “The Science Of Cooling – From A Historical Perspective.”; International Journal Of Applied Engineering Research; Volume 5, No. 6; Pp 1035 -1044;2010; ISSN 10871090

               Research articles presented in conferences

1. Suraj Bhan, Raghvendra Gautam, Pushpendra Singh, and Abhishek Sharma; 2022; A Comprehensive Review of Performance, Combustion, and Emission Characteristics of Biodiesel-Fueled Diesel Engines; International Conference on  Recent Trends in Thermal Engineering (ICCEMME) 2021; Springer, Singapore; pg. 27-41; ISSN 2195-4356; https://doi.org/10.1007/978-981-16-3428-4;
2. Suraj Bhan, Raghvendra Gautam, Pushpendra Singh, and Abhishek Sharma; 2022; A Comprehensive Review Of Performance, Combustion, And Emission Characteristics Of Biodiesel Blend With Nanoparticles In Diesel Engines; International Conference on  Recent Trends in Thermal Engineering ICCEMME 2021; Springer, Singapore; pg. 73-88; ISSN 2195-4356; https://doi.org/10.1007/978-981-16-3428-4;
3. Neeraj Kant, Pushpendra Singh; A Review On Designs And Fabrication For The Next Generation Of Organic Solar Cells Technology;2022; Int. Conf. on Recent Developments in Mechanics and Design; Doi Https://Doi.Org/10.1007/978-981-19-4140-5_5. Online ISBN 978-981-19-4140-5
4. Neeraj Kant, Pushpendra Singh Et Al.; Stumpy-Paced Green Power Generation System; 2021; 4th International Conference On Recent Developments In Control, Automation & Power Engineering (RDCAPE), 2021; Pp. 351-355; Doi:10.1109/Rdcape52977.2021.9633633.
5. Shilpi Ahluwalia, Jai Gopal Sharma And Pushpendra Singh. “Effect Of Process Parameters On Extraction Of Proteins From Jatropha Seed Cake- A Byproduct Of Biodiesel Industry”, International Conference On Future Learning Aspects Of Mechanical Engineering- 2018, Amity University.
6. Shilpi Ahluwalia, Jai Gopal Sharma And Pushpendra Singh. “Effect Of Ph And Temperature On The Extraction Of Jatropha Curcas Proteins”, International Conference On New Frontiers Of Engineering, Science & Technology (NFEST-2018), Delhi Technological University. ISBN, 978-93-86238-41-2
7. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh, Comparative Study Of Various Types Of 3d Printing Technology & 3d Modelling Of Automotive Component, 1st International Conference On New Frontiers In Engineering, Science & Technology, DTU (ISBN, 978-93-86238-41-2), 2018, 594-598.
8. Nagendra Kumar Maurya, Vikas Rastogi, Pushpendra Singh 2019, Investigation Of Dimensional Accuracy And International Tolerance Grades Of 3d Printed Polycarbonate Parts, 2nd International Conference On Computational And Experimental Methods In Mechanical Engineering (ICCEMME-2019), (ISBN, 978-93-86238-41-2).
9. Rahul Yadav, Rahul Kumar Sah, Pulkit Mann, Deepak Kumar And Pushpendra Singh; A Study Of Thermal Conductivity Of Chromium Oxide Based Ceramic Composite Coating; CIMS-2020: International Conference On Industrial And Manufacturing Systems, 9-11, October, 2020.
10. Deepak Kumar, Pushpendra Singh, R.S Walia And Qasim Murtaza      Wear Analysis Of Thermally Sprayed Al2o3-13%Tio2 Coating At High Temperature", 1st International Conference On Energy, Materials Sciences And Mechanical Engineering (EMSME - 2020), October 30th -November 1st, 2020.

 

S.N.	Title with page no.	Type of Book & Authorship	Publisher & ISSN/ ISBN No.	Whether Peer Reviewed	Date of Publication
1	Proceedings of International Conference on Smart Technologies for Mechanical Engineering,	Co-editor	Excellent Publishing House, 2013, ISBN: 978-93-83083-35-0 (Print)	Peer reviewed	2013
2	E Book of proceedings of the International Conference on Smart Technologies for Mechanical Engineering,	Co-editor	Excellent Publishing House, 2013, ISBN: 978-93-83083-35-0 (Online)	Peer reviewed	2013
3	GATE 2016 Mechanical Engineering; PEARSON	Reviewer (Chapter – Heat & Mass Transfer)	ISBN- 9789332547308	Yes	2016
4	Modeling of Air-conditioning Systems and Building Environments;	Book Reviewer	Wiley	Yes	2016

                 Patents Filed – Four

• Granted – Two
• Published Two

1. Commendable research award 2023 (shortlisted) for “Application of response surface approach to optimize CI engine parameters fueled by newly developed waste cooking biodiesel in fused with Al2O3 nanoparticles”. Suraj Bhan., Raghvendra Gautam. Pushpendra Singh; DOI: 10.1002/ep.14151; Environmental Process & Sustainable Energy; ISSN:1944-7450
2. Commendable research award 2023 (shortlisted) for “Synergistic effect of Al2O3–40%TiO2 coating on thermal conductivity and corrosion rate of SS 304 substrate”. Kumar, d., Murtaza, q. Walia, r. S., & Singh;  https://doi.org/10.1007/s12046-023-02341-7; Sådhanå (2023) 48:266.
3. Commendable research award 2022 for “comparative investigation on thermally sprayed al203, al203 139% (tio2) and ali203 40% (ti02) composite coatings from room to 400 c temperature”. Kumar, D., murtaza, Q. Walia, R. S., & singh,P. (2022). Int. J. Surface topography: metrology and properties, 10(1), 015043; ISSN: 2051-672x (SCIE)
4. Commendable  research award 2020 for “an overview of mechanical properties and form error in rapid prototyping”; nagendra kumar maurya, vikas rastogi, pushpendra singh; CIRP; journal of manufacturing Science and technology; 2020; ISSN: 1755-5817; https://doi.org/10.1016/j.cirpj.2020.02.003; if 2.991; SCIE.
5. Commendable  research award 2020 for “optimization of protein extraction from detoxified jatropha seed cake using response surface methodology and amino acid analysis”; ahluwalia, s., bidlan, r., singh, p. And sharma, j. G.; international journal of environmental Science and technology, (springer berlin heidelberg); print 2020; ISSN 1735-1472; https://doi.org/10.1007/s13762-019-02340-4; if 2.540; SCIE.
6. Best paper award for the paper “a study of thermal conductivity of NiCrFeSi based ceramic composite coating” authored by rahul yadav, rahul kumar sah, pulkit mann, deepak kumar and pushpendra singh in the international conference on industrial and manufacturing systems cims-2020 09-11 October 2020 Dr. B. R. Ambedkar national institute of technology, Jalandhar.
7. As the twinning coordinator, DTU, achieved highest grade of 1, in performance under twinning segment during the performance audit of TEQIP iii project for DTU.

                 CONFERENCES /SEMINARS / FDPS/ WORKSHOPS – ATTENDED

1. Participated In the One-Week Faculty Development Program on Research Methodology and Introduction to Modelling Techniques Held From 18 To 23 July 2022 at DSM, DTU.
2. Attended A One Week Short Term Training Program On “Robotics And AI” From 17 May 2022 To 21 May 2022 Organized by Department of Mechanical Engineering, DTU.
3. Completed (With A+ Grade) A Two Week Online Interdisciplinary Course On “The Quintessential Educator – Challenges and Opportunities in The Changing World” From 23 Aug to 06 Sept. 2021, Organized by Ramanujan College, University of Delhi.
4. Participating In Self Finance Online Faculty Development Programme On "Modern Trends in Manufacturing and Thermal Science (MTMTS-2022)" Organized by Department of Mechanical Engineering, National Institute Of Technology Delhi, India, Held During April 05-10th, 2022.
5. Completed Training on Procurement Procedures And Provisions Applicable Such As GFR, Procurement Manuals Etc., Organized On 28 Oct 2021 By The Directorate Of Training: Union Territories Civil Services, Govt. Of NCT Of Delhi.
6. Participated In 5-Day Online FDP On The Theme “Inculcating Universal Human Values In Technical Education” Organized By All India Council For Technical Education (AICTE) From 26th September To 30th September 2022.
7. Attended One Day AICTE Training on Approval Experts Committee at Delhi HQ.
8. Participated In a One Week Faculty Development Program on Applications of Green Energy Technologies for Environmental Sustainability, during 02nd to 07th April 2018 at RGPV Bhopal.
9. Attended One Week TEQIP-II Faculty Development Programme on Renewable Energy and Alternative Fuels (REAF-2014) organized by Department of Mechanical, Production and Industrial and Automobile Engineering, Delhi Technological University, Delhi during June 16-20, 2014.
10. Participated In A One Week Faculty Development Program On “Precision Manufacturing: Technology For Better Tomorrow (PMTBT-2014)” During 14th To 18th July 2014.
11. Participated In A One Week Faculty Development Program On Renewable Energy And Alternative Fuels (REAF - 2014) During 16th To 20th June 2014.
12. Participated In A One Week Faculty Development Program On “Modeling And Simulation Of Dynamical System And Optimization (MSDSO - 2014)” During 09th To 13th June 2014 at MED DTU.
13. Attended One Day Workshop On NKN & NMEICT Projects In September 2014, At DTU.
14. Participated In A Two Week Faculty Development Program On Automation In Manufacturing at MED DTU In 2015.
15. Attended A One Day Workshop On “Indo Japan Collaborative Research Program On Concentrated Solar Power: DTU Partnership With Industries” Held On 30th April 2014 At DTU.
16. Participated In A Workshop On “International Property Rights Meets Information Technology Series I’ Organized By DSM, DTU, 2013.
17. Participated In A Workshop On “International Property Rights Meets Information Technology Series II’ Organized By DSM, DTU, 2013.
18. Lecture By Noble Laureate Prof. Roger D. Kornberg At Dtu, 2013.
19. Attended A Two Week AICTE Sponsored Short Term Course On “Renewable Energy With Special Emphasis On Solar And Wind Energy” At NITTTR, Bhopal In Dec 2013.
20. Attended A Short Term Training Program (MHRD - AICTE) On “Recent Applications Of Thermal Engineering” During 11th To 22nd Aug 2008 Organized By Manit, Bhopal.
21. Attended A National Workshop (Under TEQIP-1) On “I.C. Engines Research And Developments” Organized By Manit, Bhopal, During 13th To 15th Nov 2007.
22. Presented A Paper Titled “Solar Energy” In A Seminar On “Recent Trends In Electronics And Communication” On 22nd April 2000.
23. Participated In A DST, Delhi, Sponsored “Entrepreneurship Development Camp” Organized By SATI, Vidisha, During 14th To 16th Sept 2000.
24. Participated In One Day Seminar On Electric Vehicles At DTU In March 2020
25. Participated In The Webinar On “Indo German Bilateral Funding Programmes For Advanced Industrial Research” Organized By Nit Jalandhar And Indo-German Science & Technology Centre.
26. Participated In National Webinar On “Innovation, Incubation & Entrepreneurship” Organized In June 2020 By ESCi Hyderabad.
27. Participated In National Webinar For “Leadership In Higher Education” Organized In June 2020 By ESCI Hyderabad.
28. Participated In National Webinar On “Intellectual Property Rights” Organized On 15th & 16th July 2020 By ESCI Hyderabad.
29. Participated In A One Week Online Short-Term Course On “Supply Chain Management: Challenges And Strategies” Organized By Nit Jalandhar From 13th To 17th July 2020.
30. Participated In International Summit On Quality Indices In Higher Education - 2020, Held During 6th To 7th November, 2020 At Delhi Technological University, Delhi.
31. Participated In International Conference On Recent Advances In Mechanical Engineering”, (RAME-2020) At DTU During September 18-19, 2020.
32. Participated In The 1st International Conference On Energy, Materials Sciences And Mechanical Engineering (EMSME - 2020) Organized By Department Of Mechanical Engineering, National Institute Of Technology Delhi, Delhi, India Held During October 30th - 01st November, 2020.
33. Participated In One Week Online STTP On “Moodle Learning Management System” Conducted By Department Of Mechanical Engineering And Department Of Computer Science And Engineering, NIT Warangal, From 04-01-2021 To 08-01-2021.
34. Attended And Successfully Completed Two Week Online FDP On Indian Knowledge Systems In Contemporary Education & Practices 5-19 November, 2020 , Initiative Of Department Of Contemplative And Behavioral Sciences (DCBS) Sri Sri University, Cuttack (Odisha) In Collaboration With Centre For Professional Development In Higher Education (CPDHE) UGC-HRDC, Delhi University.
35. Participated In National Productivity Council Webinar On “Concept Of Environmental Impact Assessment” Held On 14th May, 2021.
36. Participated In National Productivity Council Webinar On “Environment Laws As Enabler To Balance Environment Considerations And Economic Growth” Held On 15th February, 2021
37. Participated In The Webinar On "Survive To Thrive: Resilient Entrepreneur" Held On "06 October 2020 Organized By NPC.
38. Participated In The Webinar On "Disciplinary And Vigilance Cases" Held On "18 November 2020" Organized By NPC.
39. Attended And Successfully Completed The Online Course On “Energy, Economics Environment And Policy” On 28th March 2020 From ADB Institute Japan. 
40. Participated In One Week Online STTP On “Moodle Learning Management System” Conducted By Department Of Mechanical Engineering And Department Of Computer Science And Engineering, NIT Warangal, From 04- 01-2021 To 08-01-2021.

CONFERENCES /SEMINARS / FDPS/ WORKSHOPS – ORGANIZED

1. Organized One Week AICTE Sponsored ATAL Faculty Development Program Titled “Clean Energy Manufacturing: Transformation for Sustainable Development” From 04th – 08th October 2021.
2. Organizing Committee Member of International Summit on Quality Indices in Higher Education - 2020, Held During 6th To 7th November, 2020 at Delhi Technological University, Delhi
3. Organized TEQIP III Sponsored One-Week International Lecture Series On “International Lecture Series on Bond Graph Modelling and Simulation (BMS-2018)”, 1st -5^th, October2018.
4. Organized A One Week Faculty Development Program On “Precision Manufacturing and Circular Economy” During 04th to 08th June 2018.
5. Organized A One Week Faculty Development Program On “Precision Manufacturing: Technology For Better Tomorrow (PMTBT-2014)” During 14th To 18th July 2014.
6. Organized An International Conference On Smart Technologies For Mechanical Engineering (STME-2013), DTU.

                 OTHER ACADEMIC CONTRIBUTIONS

1. IQAC Coordinator (Mechanical Department), DTU since Aug 2025
2. Advisor, Cultural Council DTU 2025-26
3. Member Board of Studies, Mechanical Department DTU.
4. Member, Condemnation Committee (Mechanical Department) DTU since 2024
5. DRC Member in The Department of Design, DTU during 2021-23.
6. Member - Technical Advisory Committee Of International Conference On Industrial And Manufacturing Systems (CIMS-2021) During November 11 – 13, 2021, Organized By Department Of Production And Industrial Engineering, Punjab Engineering College, Chandigarh.
7. Session Co-Chair in International Conference on “Recent Advances in Mechanical Engineering”, (RAME-2020) at DTU During September 18-19, 2020.
8. Developed the curriculum for subjects’ energy conversion technology and energy systems, for the proposed PG course of MTech. (ESM).
9. Member of curriculum revision body for ME, PE and MAM in department.
10. Paper setter, examiner and invigilator of the theory and practical examination of continuous evaluation / mid semester & end semester of the DTU.
11. Session Chair In International Conference On Innovative Technologies In Mechanical Engineering At KIET Ghaziabad.
12. Reviewer In International Conference on Innovative Technologies in Mechanical Engineering at Kiet Ghaziabad.
13. Reviewer in Journal of Thermal Engineering (https://jten.yildiz.edu.tr)
14. Reviewer in STM Journals
15. Reviewer in International Journal of Sustainable Energy Technologies and Assessments, Science Direct.
16. Reviewer In International Journal of Engine Research, Sage Journals.
17. Delivered An Expert Lecture on Green Manufacturing In The One Week Faculty Development Program On “Precision Manufacturing And Circular Economy” During 04th To 08th June 2018.
18. Member Board Of Studies Of Department Of Mechanical Engineering (2019-2020) At MITS, Gwalior
19. Member Of Patent Review Committee (2020) For Department Of Mechanical Engineering, DTU.
20. Delivered An Expert Lecture On Green Manufacturing In The One Week Faculty Development Program On Precision Manufacturing Technology For A Better Tomorrow In July 2014.
21. Delivered An Expert Lecture On Fem In The One Week Faculty Development Program On MSDSO In May 2014.
22. Co- Chairman Of A Technical Session On “Computational Fluid Dynamics” In The International Conference On Smart Technologies For Mechanical Engineering (Stme-2013), DTU.
23. Delivered An Expert Lecture On Role Of Renewable Energy In Precision Manufacturing In The One Week Faculty Development Program On Precision Manufacturing And Circular Economy In June 2018.
24. External Expert Member Of The Student Research Committee (SRC) in Department of Physics, DTU.
25. External Expert Member Of The Student Research Committee (SRC) At SRM University.
26. Member Of Patent Review Committee (2020) For Department Of Mechanical Engineering, DTU.
27. Supervisoed Eleven DTU Students during Two Months Internship From June To July 2020..
28. Supervised one IGDTU Student, Ms. Sanchita Singh, during her two months Internship From June To July 2020.