Krovvidi Srinivas

Dr. KROVVIDI SRINIVAS.                                                                                                       

Mob: +919990927342

Email: srinivaskrovvidi@dtu.ac.in

Qualifications:

M.Tech., MBA(Executive), Ph.D.

Areas of interest:

Engineering Materials, Dynamics of machines, Composite materials and Non-Conventional Machining.

1. Worked as Lecturer in Mechanical Engineering at St.Peter's Engineering college, Avadi, Chennai under University of Madras from 2/12/1995 to 31/03/2000

2. Worked as Lecturer in Mechanical Engineering at Dr.B B A Government Polytechnic, Karad(DP), U T of Dadra and Nagar Haveli from 13/04/2000 to 30/10/2008.

3. Worked as Assistant Professor(Senior Scale) in the Department of Mechanical Engineering. Delhi Technological University  from 31/10/2008 to 30/10/2013

4. Worked as Assistant Professor (Selection Grade) in the Department of Mechanical Engineering. Delhi Technological University  from 31/10/2013 to 30/10/2016

5. Working as Associate Professor since 31/10/2016

Undergraduate Programs

1. Engineering Materials and Metallurgy.

2. Dynamics of Machines

3. Machine Design

4. Mechanics of Solids

5. Composite Materials

Post Graduate Programs:

1. Mechanical Vibrations

2. Composite Matrerials

3. Global Business Management

4. Industrial Economics and Management.

Membership of Professional societies:

1. Member of Institution of Engineers (India).
2. Life member of ISTE.
3. Life member of Powder Metallurgy Association of India.

 

[1]          K. Srinivas, Q. Murtaza, and A. K. Aggarwal, “Effect of shape of magnet on the machining of workpiece,” Int. J. Recent Technol. Eng., vol. 8, no. 2 Special Issue 11, pp. 2909–2913, 2019, doi: 10.35940/ijrte.B1367.0982S1119.

[2]         K. Srinivas, Q. Murtaza, and A. K. Aggarwal, “Effect of permanent magnetic pole orientation on field strength in viscoelastic magnetic abrasive finishing process,” Int. J. Mech. Prod. Eng. Res. Dev., vol. 9, no. 5, pp. 43–52, 2019, doi: 10.24247/ijmperdoct20195.

[3]         K. Srinivas, Q. Murtaza, and A. K. Agarwal, “Modelling of viscoelastic fluid in finishing processes,” Int. J. Sci. Technol. Res., vol. 8, no. 9, pp. 684–692, 2019.

[4]         B. Seshavenkat Naidu and S. Krovvidi, “Fabrication of E-Glass Fibre Based Composite Material with Induced Particulate Additives,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1033, no. 1, p. 012075, Jan. 2021, doi: 10.1088/1757-899X/1033/1/012075.

[5]         K. Mathur, L. K. Choudhary, and K. Srinivas, “Design and analysis of a novel Y-type hydraulic braking system for implementation in ATVs,” Int. J. Mech. Eng., vol. 6, no. 1, pp. 1–10, 2021.

[6]         A. Sharma, H. Chawla, and K. Srinivas, “Prediction of Surface Roughness of Mild Steel finished with Viscoelastic Magnetic Abrasive Medium,” Evergreen, vol. 10, no. 2, pp. 1061–1067, 2023, doi: 10.5109/6793663.

 

SCI PUBLICATIONS

[1]         K. Mathur, L. K. Choudhary, A. M. Natu, K. Srinivas, and V. Rastogi, “Conceptualization and Modeling of a Flywheel-Based Regenerative Braking System for a Commercial Electric Bus,” SAE Int. J. Commer. Veh., vol. 12, no. 4, pp. 02-12-04–0018, Nov. 2019, doi: 10.4271/02-12-04-0018.

[2]         V. Chaudhary, P. P. Das, R. Sahu, K. Srinivas, and V. K. Dwivedi, “An investigation on thermal and chemical behavior of jute/hemp/flax fiber reinforced woven composites and its hybrids,” J. Eng. Res., Nov. 2021, doi: 10.36909/jer.ICCEMME.15753.

[3]         P. P. Das, R. Sahu, V. Chaudhary, K. Srinivas, and S. P. Dwivedi, “Physico-mechanical and morphological studies of jute/glass reinforced epoxy composites and its hybrids,” J. Eng. Res., Nov. 2021, doi: 10.36909/jer.ICCEMME.15859.

[4]         A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Modelling Of Wind Turbine Magnet for Magnetic Abrasive Finishing and Magnetic Field Assisted Abrasive Flow Machining Process,” J. Eng. Res., Oct. 2021, doi: 10.36909/jer.ICARI.15291.

[5]         S. P. Dwivedi, R. Sahu, A. Saxena, V. K. Dwivedi, K. Srinivas, and S. Sharma, “Recovery of Cr from chrome-containing leather waste and its utilization as reinforcement along with waste spent alumina catalyst and grinding sludge in AA 5052-based metal matrix composites,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., vol. 236, no. 1, pp. 160–170, Feb. 2022, doi: 10.1177/09544089211038385.

[6]         A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Novel electrode for thermal additive centrifugal force-assisted abrasive flow machining,” J. Brazilian Soc. Mech. Sci. Eng., vol. 45, no. 11, p. 583, Nov. 2023, doi: 10.1007/s40430-023-04504-3.

[7]         A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Analysis of Shapes of Centrifugal Force-Generating Rod in Centrifugal Force-Assisted Abrasive Flow Machining Process,” MAPAN, vol. 38, no. 2, pp. 459–479, Jun. 2023, doi: 10.1007/s12647-023-00626-0.

[8]         A. Saxena et al., “A comparatively numerical investigation on heat transfer behavior of different materials used for internal combustion engines,” Int. J. Engine Res., vol. 24, no. 11, pp. 4482–4489, Nov. 2023, doi: 10.1177/14680874221112722.

[9]         A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Parametric investigation of thermal additive centrifugal abrasive flow machining process for enhancing productivity,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., May 2024, doi: 10.1177/09544089241251737.

[10]      A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Development and Characterization of Novel Engine-Oil-Based Media Gel for Thermal Additive Centrifugal Abrasive Flow Machining,” Natl. Acad. Sci. Lett., vol. 47, no. 6, pp. 655–658, Dec. 2024, doi: 10.1007/s40009-024-01400-9.

[11]      A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Enhancing material removal of TACAFM process through improved electrode geometry,” S?dhan?, vol. 49, no. 2, p. 110, Mar. 2024, doi: 10.1007/s12046-024-02474-3.

[12]      A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Morphology of Finished Brass Surface by Thermal Additive Centrifugal Abrasive Flow Machining Process Using Novel Electrode,” JOM, vol. 76, no. 1, pp. 510–521, Jan. 2024, doi: 10.1007/s11837-023-06220-8.

[13]      R. Butola et al., “Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing,” Proc. Inst. Mech. Eng. Part N J. Nanomater. Nanoeng. Nanosyst., vol. 238, no. 3–4, pp. 119–129, Dec. 2024, doi: 10.1177/23977914231151485.

[14]      A. Bagchi, Q. Murtaza, and K. Srinivas, “Microstructural Evolution and Iron Dilution in Synergic Metal Inert Gas-Welded IN-625 Overlays on AISI 4140 Steel: Effect of Heat Input,” J. Mater. Eng. Perform., Aug. 2025, doi: 10.1007/s11665-025-11848-5.

[15]      R. Sahu, K. Srinivas, and A. K. Agrawal, “The effect of reinforcement particle weight percentage on the mechanical and microstructural properties of AA 2024-based metal matrix composite,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 239, no. 13, pp. 5021–5033, Jul. 2025, doi: 10.1177/09544062251324092.

[16]      B. S. Naidu, K. Srinivas, and A. K. Agarwal, “Recycling of the solar panels that are consolidated using glass fibre polymers,” Green Mater., vol. 13, no. 2, pp. 138–144, May 2025, doi: 10.1680/jgrma.24.00183.

[17]      A. Bhardwaj, K. Srinivas, and R. Chaudhary, “Analysis of thermal additive centrifugal abrasive flow machining process with improved electrode geometry,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., vol. 239, no. 4, pp. 2165–2178, Aug. 2025, doi: 10.1177/09544089231195171.

 

UGC CARE LISTED

[1]         B. S. Niadu and S. Krovvidi, “Virtual Analysis of E-glass Based Fibre Composite,” vol. 8, no. 6, pp. 3605–3613, 2020.

RESEARCH PAPERS PRESENTED AT INTERNATIONAL CONFERENCES:

Krovvidi Srinivas, Yamika Patel, “Design stability of Quadrotor to be used in Precision Agriculture”, International Conference on Advanced Production and Industrial Engineering, Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during December 9-10, 2016.

Krovvidi Srinivas, Yamika Patel, “Design and Analysis of Propeller used in UAV”, International Conference on Advanced Production and Industrial Engineering, Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during December 9-10, 2016.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “A review on the effect of Abrasive size on surface finishing”, International Conference of Advance Research and Innovations (ICARI 2017), 29^th January 2017.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Study of Segregation effect in Magnetic abrasive finishing process” , International Conference of Advance Research and Innovations (ICARI 2017), 29^th, January 2017.

Krovvidi Srinivas, Yamika Patel, “CFD analysis of Propeller blade design for Quadrotor”, International Conference on Advanced Production and Industrial Engineering (ICAPIE-2017), Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during October 6^th- 7^th,2017.

Krovvidi Srinivas,“ Analysis of fluid flow characteristics at various Reynolds numbers, International Conference on Advanced Production and Industrial Engineering (ICAPIE-2017), Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi, during 6^th- 7^th October 2017.

Krovvidi Srinivas, “Design analysis of Composite material springs”, International Conference of Advanced Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas and Vasishta “Corrosion and Remedies in dry type fire sprinkler system in LPG Bottling plant”, International Conference of Advance Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas, “Launch pad for multirotor unmanned Aerial vehicle using Composite material ”, International Conference of Advance Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas, Anant Bhardwaj, , “Pressure variation in abrasive flow machining: Modelling and simulation”, International Conference on Advanced Production and Industrial Engineering(ICAPIE-2018), Organised by Centre for Advanced Production and Industrial Engineering Research(CAPIER), Delhi Technological University, Delhi during October 5^th- 6^th 2018.

Krovvidi Srinivas, A K Agrawal and  Qasim Murtaza, “Analysis of residual stress of AL6351T6 and Brass machined with CNC milling machine”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

Krovvidi Srinivas, A K Agrawal and Qasim Murtaza, “Experimental analysis of Dry sliding wear of C-steel with different hardness”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

Krovvidi Srinivas, Kunal Mathur and L Chaudhary, “Design of Y-Type dual split Hydraulic breaking system”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

 

Krovvidi Srinivas, A K Agrawal and Qasim Murtaza, “Effect of Magnetic pole Orientation on Viscoelastic Magnetic abrasive finishing Process”, International Conference on Emerging Trends in Electro-Mechanical Technologies and Management, organised by HMRITM, New Delhi on 26-27 July 2019.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Effect of shape of Magnet on the machining of Workpiece”, International Conference on Recent Trends in Engineering, Management and Science (ICRETMS-2019) organised by Delhi Institute of Technology Management & Research(DITMR), Faridabad, Haryana held on 26^th-27^th September 2019.

Krovvidi Srinivas and  N S Raghava, “Material study and fabrication of next generation urban unmanned Aerial Vehicle, Aarush-X2” 4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

Krovvidi Srinivas, “Analysis of friction reduction in artificial hip implants achieved using Passive Magnetic bearings” 4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

B.Sesha Venkat Naidu and  Krovvidi Srinivas, “Fracture of E-Glass based composites at low temperatures”,4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

 

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Simulation of flow parameters & Magnetic forces in machining of internal Cam through viscoelastic Magnetic abrasive flow finishing”, Internal Conference of Advance Research and Innovation (ICARI-2020), organised by Meerut Institute of Engineering Technology, Meerut held on 19^th January2020.

B.Sesha Venkat Naidu and Krovvidi Srinivas, “Fabrication of E-Glass fibre based Composite material with induced Particulate Additives”, International Conference on Integrated Inter disciplinary Innovations in Engineering organised by University Institute of Engineering and Technology, Punjab University, Chandigarh and Government College of Engineering and Technology, Jammu held online on 28^th-30^th August 2020.

Krovvidi Srinivas, “Time dependent variation of Viscosity of Viscoelastic Magnetic abrasive medium”, International Conference of Advance Research and Innovation (ICARI-2021) organised by Meerut Institute of Engineering and Technology, Meerut and International Journal of Advance Research and Innovation held online on 30 January 2021.

Krovvidi Srinivas, “Study of dry sliding wear behaviour of Al6351T6 under variable wear parameters”, International conference of Advance Research and Innovation (ICARI-2021) organised by Meerut Institute of Engineering and Technology, Meerut and International Journal of Advance Research and Innovation held online on 30 January 2021.

 

Krovvidi Srinivas, “CFD analysis of fluid flow characteristics over propeller blade mounted on UAV at different Reynolds Number”, 3^rd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2021) held during 11^th-13^th February 2021.

Krovvidi Srinivas, Anant Bhardwaj and Rajiv Chaudhary, “Media gel preparation optimisation for Thermal additive Centrifugal abrasive flow machining”, 4^th International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2023) organised by G L Bajaj Institute of Technology & Management, Greater Noida held during 9^th-11^th February 2023

Krovvidi Srinivas, Anant Bhardwaj and Rajiv Chaudhary “Feasible shapes of Centrifugal force generating electrode in Thermal Additive Centrifugal abrasive flow machining process”, Recent innovations in Engineering, Management and Pharmacy organised by IEC group of institutions, Greater Noida held on 24^th & 25^th February 2023.

B.Seshavenkat Naidu, Krovvidi Srinivas, A K agrawal “Stirring parameters that effect the casting output in a stir casting setup”, International Conference of Advance Research and Innovations (ICARI 2025), 2nd February, 2025, Paper ID: ICARI-ME-25-01-57, ISBN-978-93-342-6814-3

Srinivas Krovvidi, Chandan Sharma and Nand Kumar, “A review of the Green Financing in India”, International Conference of Advance Research and Innovations (ICARI 2025), 2^nd February, 2025, Paper ID:ICARI-ME-25-01-61, ISBN-978-93-342-6814-3.

Kapil, Krovvidi Srinivas and  Qasim Murtaza, “Recent advances in the development of aluminium metal matrix composites reinforced with Cerium Oxide and Graphene: A review”, International Conference of Advance Research and Innovations (ICARI 2025), 2nd February, 2025, Paper ID:ICARI-ME-25-01-65, ISBN-978-93-342-6814-3.

Rohit Sahu, Krovvidi Srinivas, A K Agrawal, “Fabrication and Analysis of Aluminium 2024 with Titanium Diboride (TiB2) composite material”, International Conference of Advance Research and Innovations (ICARI 2025), 2^nd February, 2025, Paper ID:ICARI-ME-25-01-67, ISBN-978-93-342-6814-3.

 

NIL

 

Received best paper award at the International conference on emerging trends in Electro-Mechanical Technologies and Management (TEMT-2019) organised by HMR Institute of Technology and Management, New Delhi, during 26-27 July 2019.

Received research excellence award from DTU for the year 2023.

Received research excellence award from DTU for the year 2024.

NIL

NIL

NIL

NIL

NIL

FACULTY DEVELOPMENT PROGRAMS ATTENDED: 24 one-week programs.