PROFILE

Dr. Amrish K. Panwar received Ph.D degree in Condensed Matter Physics from Department of Physics, Indian Institute of Technology Roorkee, Roorkee (UK), India in the year 2005, Presently he is working as Associate Professor in Department of Applied Physics, Delhi Technological University, Delhi. Prior to joining DTU, he has worked as a Senior Lecturer in Department of Physics & Material Science, JUET, Guna (M.P.) during 2008 to 2010. After completing Ph.D degree, he joined as Postdoctoral fellow (project scientist) on "Development of Lithium-ion Battery Technology" in the Department of Metallurgical & Materials Engineering, IIT Kharagpur, W.B., since 2006 to 2008. His area of research includes: Energy storage and conversion devices (lithium/sodium ion batteries/supercapacitors), materials synthesis to prototype device fabrication, study of multiferroic and thermoelectric materials, surface modification of low-energy solids/ polymers.

Besides teaching assignments in condensed matter physics, energy storage and conversion devices, he is actively involved in research and development work.

Dr. Panwar has been awarded ‘Young Scientist fast track project’ as principal investigator by SERB-DST, Govt. of India during 2012-2017. He has been awarded ‘Research Excellence’ awards consecutively for the years 2018-2021, 2023-2025 by DTU, Delhi. He has been recognised as Jury Member (DST INSPIRE/ Manak)- National Level Exhibition and Project Competition (NLEPC) under INSPIRE Awards for the years DST 2013 -2016, 2018.

He has supervised 08 Ph.D., 40 M. Tech (NST)/ MSc(Physics) and more than 80 B. Tech. (Engineering Physics) students. He has published about 100 research papers in the Journal of International Repute / Proceedings of National/ International Conferences and book chapters.

PREVIOUS POSITIONS/ EXPERIENCE

Experience & Other Assignments

September 2025 -till date:    Working as Associate Director, Internal Quality Assurance Cell (IQAC), DTU , Delhi-110042

August, 2022 – till date:        Working as Associate Professor, Department of Applied Physics, DTU, Delhi -110042.

August, 2010 – July, 2022     Worked as Assistant Professor, Department of Applied Physics, DTU, Delhi -110042.

January, 2015- Dec. 2018:    Worked as Warden VMH Hostel, DTU, Bawana Raod , Delhi -110042.

Mar., 2011- Mar., 2017:        OIC- Adavance Instrumentation center, DTU as Central facility 

Jan., 2011 – June, 2012:      Worked as Warden HJB Hostel, DTU, Bawana Raod , Delhi -110042.

July, 2008- July, 2010:         Senior Lecturer in department of  Physics & Material Science, JUET, Guna (M.P.) 

Jan., 2006 – July, 2008:       Post Doctoral Research Associate in LIBT Lab., Dept. of MME, IIT Kharagpur, India.

Jan., 2005 – Dec., 2006:      SRF & Research Consultant on LIB Technology, MME, IIT Roorkee, India.

July, 1999 – June, 2003:      B.Tech. Ist year Lab. & Tutorial classes in Department of Physics, I.I.T. Roorkee.

TEACHING (COURSES TAUGHT)

Teaching Assignments: UG & PG

  • B. Tech. (E.P.): Physics-I & II (AP 101 & 102), Condensed Matter Physics (EP 202), Alternative energy storage & conversion devices (EP 404)
  • M. Tech.(MST)/ PhD Course Work: Analytical Techniques (NST 502), Structure and Characterization of Materials (MST 504)
  • M.Sc. (Physics): Solid State Physics(MSPH 110), Characterization Techniques (MSPH 217) 

Acadmics and Research Lab Lab Coordinator/ In-charge: Condensed Matter Physics Lab, Energy Storage & Conversion Lab, Thin Film & Material Science Lab, Lithium-ion Battery Technology Research Lab

MEMBERSHIPS

Membership in Societies:

  • Life member - Material research Society of India (MRSI) Since 2010
  • Life member - Electron Microscopy Society of India(EMSI) since 2013
  • Life Member - Indian Society of Technical Education (ISTE) since 2016
  • Life member-  CAPIER, Dept. of Mechanical Engineering, DTU 2017

 

PUBLICATIONS

Publications:

  • In International/ National Jouranals (Published/ Accepted)
  1. Jadaun S.S., Panwar A.K., Geetanjali, (2025), "Effects of heterogeneous structure on conduction mechanism and electrochemical performance of LiTa2PO8 -fast lithium-ion conductor in quasi-solid-state lithium-ion batteries" Journal of Energy Stroage, 115, pp. 116030. 
  2. Kumar B., Pradhan L.K., Amar D., Panwar A.K., Kar M., (2025), "Evidence of Surface Biasing and Multiferroic Properties in Ferroelectric (BNT)-Ferrimagnetic (LFO) Nanocomposites", Journal of Superconductivity and Novel Magnetism, 38: 137.
  3. Kumar D., Rizwan M., Panwar A.K., (2025), “Towards Green AI: A Novel Hybrid Filter Based AI Approach for Energy Efficient State of Charge and Energy Estimation in Li-Ion Batteries under Various Drive Cycles” IEEE Transactions on Industry Applications (Accepted)
  4. Kumar D., Rizwan M., Panwar A.K., (2024), “Robust state of health estimation of commercial lithium-ion batteries based on enhanced hybrid machine learning model for electrified transportation” Electrical Engineering, (Accepted).
  5. Nasimov R., Kumar D., Rizwan M., Panwar A. K., Abdusalomov A., Cho Y.-I., (2024), “A Novel Approach for State of Health Estimation of Lithium-Ion Batteries Based on Improved PSO Neural Network Model” Processes, 12(9), pp. 1806. 
  6. Singh V., Rana S., Bokolia R., Panwar A. K., Meena R., Singh B., (2024), “Electrospun PVDF-MoSe2 nanofibers based hybrid triboelectric nanogenerator for self-powered water splitting system” Journal of Alloys and Compounds, 978, pp.173416.
  7. Jadaun S.S., Panwar A. K., Geetanjal, (2024),“The Effect of Multi-step Sintering on the density of Li7La3Zr1.75Ce0.25O12 as Solid State Electrolyte Material” Indian Journal of Pure & Applied Physics (IJPAP), 62, pp.116-123.
  8. Rajput S., Panwar A.K., Gupta A. (2024), “Facile synthesis and electrochemical studies of Mn-Zn ferrite as anode for Li-ion batteries” Journal of Alloys and Compounds, 976, pp.173145.
  9. Kumar B., Pradhan L.K., Kumar N., Panwar A.K., Kar M., (2024), “Study on Multi-ferroic Properties of (0.5) Bi0.5Na0.5TiO3-(0.5) LaFeO3 Particulate Composite” Journal of Superconductivity and Novel Magnetism, 37, pp. 657–665.
  10. Singh B., Tamta A., Chandra B., Kandpal N.D., Jadaun S.S., Panwar A.K., Babu V., Justin P., Rao H.S., Chandra Sekhar K.S.K.R., (2023), “Structural, Optical, Electrical, and Electrochemical properties of ZnMoO4 microspheres synthesized by the twin crystal method” Ceramic International, 49, pp.-38047-38057.
  11. Kumar D., Rizwan M., Panwar A.K., (2023), “Advanced Intelligent approach for state of charge estimation of lithium-ion battery”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45, pp. 10661-10681.
  12. Jain A., Panwar A.K., Tyagi P.K. (2023, “Preparation of NiMn2O4-NiMnO3@MoS2 Nano-composites with Enhanced Electrochemical Performances for Lithium-ion Batteries”, Indian Journal of Engineering and Materials Sciences, 30, pp.689-693.
  13. Rajput S., Panwar A.K., Gupta A. (2023), “Impact of Synthesis Techniques on the Electrochemical Properties of ZnCo2O4 as Alternative Anode for Lithium-ion Batteries”, Indian Journal of Engineering and Materials Sciences, 30, pp.661-666.
  14. Jain A., Panwar A.K., Tyagi P.K. (2023), “Tuning the electrical and cycling performance of nickel manganese oxide hexagonal-shaped particles via preparation routes for lithium-ion batteries”, Journal of Physics D: Applied Physics, 56, pp.385501.
  15. Pandey P, Sarkar S., Arya A., Sharma A.L., Panwar A. K., Kotnala R.K., Gaur A.,(2023) “Fabrication of activated carbon electrodes derived from peanut shell for high-performance supercapacitors”, Biomass Conversion and Biorefinery, 13, pp.6737-6746.
  16. Rajput S., Panwar A.K., Gupta A. (2023) “Study of lithium diffusion properties and electrochemical performance of SnSe/C and SnSe/MWCNT composite anode for Li-ion batteries”, Solid State Ionics, 392, pp. 116206.
  17. Jain A., Panwar A.K., Tyagi P.K. (2022), “Effect of Cr doping on Li2ZnTi3O8 as alternative anode material to enhance electrochemical properties of lithium-ion batteries”, Applied Physics A,128, pp.302.
  18. Tanwar P., Sharma P., Panwar A. K., A.K. Srivastava, Singh S., Kumar A., Kumar M.,(2022) “Ultrafast probing of indium doping on SnTe topological insulator, Physica B: Condensed Matter, 631, 413656.
  19. Jain A., Panwar A.K., Tyagi P.K (2022), “Synthesis, characterization, and electrochemical investigation of citric-acid assisted nickel manganese oxide as anode material”, MRS Advances, 7, pp.584–590.
  20. Bhardwaj A., Panwar A.K., (2022), “ Effect of carbon shell over NaCrO2 core by C2H2 decomposition to enhance electrochemical properties for rechargeable Sodium-ion batteries”, Applied Surface Science, 573, 151449.
  21. Sharma S., Panwar A. K., Tripathi M. M., (2022),  “Multiscale Modeling and Experimental Characterization for Enhancement in Electrical, Mechanical, and Thermal Performances of Lithium-Ion Battery”, Frontiers in Energy Research, 10, 1-11.
  22. Bhardwaj A., Panwar A.K., (2022), “Synthesis and electrochemical performance of Acetylene gas decomposed Fe-Based Layered Oxide cathode material for Sodium-Ion Batteries”, Journal of Engineering Research, special issue, 234-241.
  23. Sharma S., Panwar A. K., Tripathi M. M., (2021), “Thermal-Electrochemical Modeling and Analysis of Different Cathode-Anode Pairs for Lithium-ion Battery, Advances in Electrical and Computer Engineering21,3,57-64.
  24. Tanwar P., Panwar A. K., Singh S., Srivatava A. K., (2020), “Microstructural and optical properties investigation of variable thickness of Tin Telluride thin films”, Thin Solid Films, 693, 137708.
  25. A Jain, AK Panwar (2020), “Synergetic effect of rare-earths doping on the microstructural and electrical properties of Sr and Ca co-doped BaTiO3 nanoparticles”, Ceramics International (Part A), 46 (8) 10270-10278.
  26. Sharma S., Panwar A. K., Tripathi M. M., (2020),  “Storage technologies for electric vehicles”, Journal of Traffic and Transportation Engineering (English Edition), 7(3), 340-361.
  27. Sharma S., Panwar A. K., Tripathi M. M., (2020), “Investigation of Electrochemical, Thermal and Electrical Performance of 3D Lithium-Ion Battery Module in a High - Temperature Environment”, Int. Journal of Renewable Energy Development, 9 (2) 151-157.
  28. Tanwar P., Panwar A. K., Singh S., Srivatava A. K., (2020), “Investigation of vacuum evaporated SnTe thin films for their structural, electrical and thermoelectric properties”, Indian Journal of Pure & Applied Physics, 58(10), 740-749.
  29. Tanwar P., Panwar A. K., Singh S., Srivatava A. K., (2020), Comparison of Structural, Electrical and Thermoelectric Properties of Vacuum Evaporated SnTe Films of Varied Thickness, Journal of Nanoscience and Nanotechnology 20 (6), 3879-3887.
  30. Katyal P., Rathi M., Mehra P., Panwar A. K., (2020), Evaluation of Figure of Merit of Thermoelectric Materials Using Machine Learning, International Journal of Advanced Science and Technology, 29(11) 2858-2863.
  31. Saroha R., Khan T.S., Chandra M., Shukla R., Panwar A. K., Gupta A., Dhaka R. S., (2019), Electrochemical Properties of Na0.66V4O10 Nanostructures as Cathode Material in Rechargeable Batteries for Energy Storage Applications, ACS Omega 4 (6), 9878-9888.
  32. Sharma M., Sundriyal S., Panwar A. K., Gaur A. (2019), “Facile synthesis and electrochemical performance of Mg-substituted Ni1-xMgxCo2O4 mesoporous nanoflakes for energy storage applications” Electrochimica Acta, Vol.  294, pp.53-59
  33. Jain Aditya, Panwar A. K., Jha A. K. (2018) “Significant improvement in morphological, dielectric, ferroelectric and piezoelectric characteristics of Ba0.9Sr0.1Ti0.9Zr0.1O3–BaNb2O6 nanocomposites”, Journal of Materials Science: Materials in Electronics, Vol. 29 (22), pp- 19086-19098.
  34. Chandra M, Shukla R, Saroha R., Panwar A. K., Gupta A, Basu S, Dhaka R. S (2018), “Physical properties and electrochemical performance of Zn-substituted Na0. 44Mn1− xZnxO2 nanostructures as cathode in Na-ion batteries” Ceramics International, Vol.44(17), pp-21127-21131.
  35. Sharma M., Sundriyal S., Panwar A. K., Gaur A. (2018), “Enhanced supercapacitive performance of Ni0. 5Mg0. 5Co2O4 flowers and rods as an electrode material for high energy density supercapacitors: Rod morphology holds the key”, Journal of Alloys and Compounds, vol. 766, pp- 859-867.
  36. Jain Aditya, Panwar A. K., Jha A. K.  (2018), “Significant enhancement in structural, dielectric, piezoelectric and ferromagnetic properties of Ba0. 9Sr0. 1Zr0. 1Ti0. 9O3-CoFe2O4 multiferroic composites” Materials Research Bulletin, Vol. 100, pp.367-376.
  37. Saroha Rakesh, Panwar A. K., Gaur A., Kumar V., Sharma Y., Tyagi P. K.  (2018), “Electrochemical studies of novel olivine-layered (LiFePO4-Li2MnO3) dual composite as an alternative cathode material for Lithium-ion batteries” Journal of Solid State Electrochemistry, vol. 22 (8), pp.2507-2513.
  38. Sarvottam K. Jha, Reetu Kumari, Shubham Choudhary, Puspendu Guha , P. V. Satyam, Brajesh S. Yadav, Zainab Naqvi, S. S. Kushvaha, R. K. Ratnesh, M. S. Mehata, Jain Aditya, Panwar A. K., Fouran Singh, and Pawan K. Tyagi (2018), ‘Facile Synthesis of Semiconducting Ultrathin Layer of Molybdenum Disulfide’, Journal of Nanoscience and Nanotechnology, Vol. 18, pp-614-622.
  39. Jain Aditya, Panwar A. K., Jha A. K. and Sharma Yogesh (2017), “Enhanced structural, dielectric, ferroelectric and piezoelectric properties of (1‐x) Ba0. 9Sr0. 1TiO3–(x) Ba0. 7Ca0. 3TiO3 ceramics derived using mechano‐chemical activation technique”, Journal of the American Ceramic Society, Vol. 100(11), pp-5239-5248.
  40. Pastor M., Tirupathi P., Kumar N., Panwar A.K., Chopkare M., and Bhadoria B. S. (2017), “Study of ferroelectric phase transition in new lead free Ba(Ca1/3Nb2/3)O3 compound”, Ferroelectric, Vol. 518, pp-73-84.
  41. Jain Aditya, Panwar A. K., Jha A. K. and Sharma Yogesh (2017), “Improvement in dielectric, ferroelectric and ferromagnetic characteristics of Ba0.9Sr0.1Zr0.1Ti0.9O3-NiFe2O4 composites”, Ceramic International, Vol.43, pp.10253-10262.
  42. Saroha Rakesh and Panwar A. K., (2017) “Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries” J Physics D: Applied Physics, Vol. 50, pp-255501.
  43. Saroha Rakesh, Farooq Akmal R., Krishniya Lucky, Tyagi P.K.  and Panwar A. K., (2017) “Synthesis and Electrochemical characterization of Graphene nanoflakes and LiFe0.97Ni0.03PO4/C for lithium ion battery” Ionics, Vol.23, pp- 2641-2650.
  44. Saroha Rakesh, Panwar A. K. and Sharma Yogesh, (2017) “Physicochemical and electrochemical performance of LiFe1-xNixPO4 (0 ≤ x ≤ 1.0) solid solution as potential cathode material for rechargeable lithium-ion battery” Ceramic International, Vol. 43, pp- 5734–5742.
  45. Saroha Rakesh, Singh Jitendra, Verma Sandeep, Jain Aditya, Panwar A. K. (2017) “Development and Electrochemical performances of Li3V2(PO4)3 and Li4Ti5O12 materials for lithium ion battery” Ionics, Vol 23, pp-2631-2639.
  46. Singh Anshika, Guha Pushpendu, Panwar A. K., Tyagi P. K., (2017) “Estimation of intrinsic work function of multilayer graphene by probing with electrostatic force microscopy”, Applied surface science, Vol. 402, pp- 271–276.
  47. Saroha Rakesh, Gupta A.K. and Panwar A. K.  (2017), “Electrochemical performances of Li-rich layered-layered Li2MnO3-LiMnO2 solid solutions as cathode material for lithium-ion batteries, Journal of Alloys and Compounds, Vol. 614, pp 40– 46.
  48. Jain Aditya, Panwar A. K., Jha A. K. (2017) Effect of ZnO doping on structural, dielectric, ferroelectric and piezoelectric properties of BaZr0.1Ti0.9O3 Ceramics” Ceramic International, Vol.43(3), pp.2927-2932.
  49. Saroha Rakesh, Sharma Y. K., Tyagi, P. K, Ghosh S. and Panwar A. K.  (2017), “Development of surface functionalized ZnO-doped LiFePO4/C composites as alternative cathode material for lithium ion batteries”, Applied Surface Science, Vol. 394, pp. 25–36.
  50. Jain Aditya, Panwar A. K., Jha A. K. (2016) “Influence of milling duration on microstructural, electrical, ferroelectric and piezoelectric properties of Ba0.9Sr0.1Zr0.04Ti0.96O3 ceramic, Ceramic International, Vol. 42, pp.18771–18778.
  51. Saroha Rakesh, Jain Aditya and Panwar A. K.  (2016), “Effect of ZnO coating on physicochemical properties of LiFePO4 cathode material for lithium ion batteries”. Advanced Materials Proceeding, Vol. 1(1), pp.104-108.
  52. Jain Aditya, Panwar A. K., and Jha A. K., (2016), “Structural, dielectric and ferroelectric studies of Ba12xSrx TiO3 ceramics prepared by mechanochemical activation technique”, Journal of Materials Science-Materials in Electronics., Vol 27, pp 9911–9919.
  53. Jain Aditya, Saroha Rakesh, Postur Mukul, Jha A. K. and Panwar A. K., (2016) “Effect of sintering duration on structural and electrical properties of Ba0.9Sr0.1Ti0.96Zr0.04O3 solid solution”, Current Applied Physics, Vol. 16, pp  859-866.
  54. Jain A., Maikhuri N., Saroha R., Pastor M., Jha A.K., Panwar A.K.  (2016) “Microstructural and dielectric investigations of vanadium substituted barium titanate ceramics” Advanced Materials Letters, Vol. 7, pp - 567-572.
  55. Singh Anshika, Kumari Reetu, Kumar Vinay, Krishnia Lucky, Naqvi Zainab, Panwar A. K., Bhatta U. M, Ghosh Arnab, Satyam PV, Tyagi P. K., (2016), “Electron irradiation induced buckling, morphological transformation, and inverse Ostwald ripening in nanorod filled inside carbon nanotube” Applied surface science, Vol. 360, pp 1003-1008.
  56. Saroha R., and Panwar, A. K., (2015) “Structural, Optical and Electrical Properties of Synthesized ZnO Nanoparticles” Advanced science letters, Vol. 21, pp 2750-­2754.  
  57. Tanwar P., Srivastava A. K., Singh S., Panwar A. K. (2015), Peculiar Structural, Optical, Paramagnetic, Electronic and Electrical behavior in Bulk Tin Telluride grown via Physical route Advanced science letters, Vol.  21, 2855-2864.
  58. Pastor M., Kumar N, Kumar B, Panwar A. K., Biswas K, and Pandey A. C., (2014) “Study of diffuse phase transition in Pb(Cd1/3Nb2/3)O3 compound” Journal of Alloys and Compounds, Vol. 614, pp 40– 46.
  59. Upadhayay R. K. and Panwar A.K. (2014) “Physico-Chemical Characterization of Cathode Material, Li1+x(Mn0.4Ni0.4Fe0.2)1-xO2 (x=0.2) for Lithium Ion Batteries” International Journal of Emerging Technology and Advanced Engineering, Volume 4, Special Issue 1, pp 249 – 253.
  60. Maikhuri Neelam, Panwar A. K., and Jha A. K. (2013) “Investigation of A- and B-site Fe Substituted BaTiO3 Ceramics,  Journal Applied Physics, Vol. 113, pp 17D915.
  61. Arora M., Sati P.C., Chauhan S., Chhoker S., Panwar A. K.,  Kumar M. (2013), “Structural, Optical and Multiferroic Properties of BiFeO3 Nanoparticles Synthesized by Soft chemical Route” Journal of Superconductivity and Novel Magnetism,Vol. 26, pp 443-448.
  62. Panwar A. K., Singh A., Kumar A., and Kim H., (2013) “Terahertz Imaging System for Biomedical Applications: Current Status” International Journal of Engineering & Technology IJET-IJENS, Vol:13, pp. 33-39. 
  63. Singh G., Panwar A. K., Sil A. and Ghosh S., (2010) ‘Effect of citric acid content on synthesis of LiNi1/3Mn1/3Co1/3O2 and its electrochemical characteristics’ Ceramic International, Vol. 36, pp. 1831-1836.      
  64. Panwar A. K., Barthwal S. K. and Ray S., (2009) ‘Ageing and annealing behaviour of polycarbonate surface modified by dc glow discharge’, J Applied Polymer Science, Vol. 112, pp 700-708.
  65. Panwar A. K, Singh G., Sil A. and Ghosh S.(2009), ‘Synthesis and characterization of citric acid assisted Cr doped lithium manganese oxide spinel’, Ceramic Silikaty, Vol 53(4), pp -260 – 267.
  66. Singh G., Panwar A. K., Sil A. and Ghosh S., (2009) “Synthesis and characterization of LiMn2O4 nano-particles using citric acid as chelating agent”, ‘Advanced Engineering Materials’ vol 67, pp-227-232.
  67. Panwar A. K., Barthwal S. K., Shivaprashad S.M. and Ray S. (2008), ‘Physico-chemical changes in PC surface due to dc glow discharge treatment in air’, J Physics D: Applied Physics, Vol. 41, pp. 135305.
  68. Panwar, A. K., Barthwal S. K. and Ray S. (2007), “Variation of lap shear tensile strength of PC-mild steel adhesive joints with DC glow discharge modified PC” Metallurgical & Materials Transcation: A , Vol. 38A, pp. 197-202.
  69. Panwar A. K., Barthwal S. K. and Ray S., (2003), "Effect of Evaporation on the Contact angle of a sessile drop on solid substrates" Journal of Adhesion Science and Technology, Vol. 17, pp. 1321-1329.
  70. Barthwal S. K., Panwar A. K. and Ray S., (2003), "Dynamic evolution of contact angle on solid substrates during evaporation" Contact Angle, Wettability and Adhesion, Vol. 3, pp. 175-190.

International/ National Conferences/ Symposiums Proceedings/ Book Chapters:-

  1. Mittal V, Mathur B., Beniwal S., Panwar A. K., (2022), “ Investigation of Thermal Battery Management Pack Using Liquid Cooling Systems in 3-D Li-Ion Battery Model”, Advances in Manufacturing Technology and Management: Proceedings of 6th International Conference on Advanced Production and Industrial Engineering (ICAPIE), 569-577.
  2. Jain A., Panwar A.K., Tyagi P.K (2022), “Structural, Morphological and Electrochemical Studies of Complex Spinel Titanate Li2ZnTi3O8” Proceedings of the International Conference on Atomic, Molecular, Optical & Nano Physics with Applications: CAMNP 2019, Springer Singapore, 201-209.
  3. Daripa Saurabh, Panwar A. K., (2020) “Fabrication of Ag Thin Film Nano Layered Structure and Its Potential Application as The Supercapacitor Electrode” paper presented in International Conference on Atomic, Molecular, Optical and Nano Physics with Applications (CAMNP-2019) (article submitted for publication in Springer online proceeding through this conference).
  4. M Aditya, Kumar Naveen, Kumar Chetan, and Panwar A. K.  (2020) “The effect of variable electrolyte thickness of LMO vs Li Metal Foil Lithium-ion coin cell using simulation” Presented in International Conference on Invetive Materials Science Applications, organized on 18-19, June 2020 by PPG Institute of Technology, Coimbatore (ICIMA 2020) and published in AIP Conference Proceedings, Vol. 2281(1) pp. 020025.
  5. Saroha Rakesh, Panwar A.K. and Bhardwaj Abhishek, (2018), Synthesis and Electrochemical Properties of Low-Temperature Synthesized Li2MnO3/MWCNT/super P as a High Capacity Cathode Material for Lithium ion Batteries”, National Conference on Advanced Materials and Nano-Technology (AMN 2018), March 15-17 at JIIT Noida, UP.  
  6. Bhardwaj Abhishek, Saroha Rakesh and Panwar A.K. (2017), “Synthesis and Physicochemical Characterization of LiMn2O4 as Cathode Material for Lithium Ion Battery using Two Different Routes”, International Conference on Advanced Production and Industrial Engineering (ICAPIE 2017) , October 06-07 at Delhi Technological University, Delhi.
  7. Saroha Rakesh, Aditya Jain and Panwar A.K. (2016), “Effect of ZnO coating on physicochemical properties of LiFePO4 cathode material for lithium ion batteries”.” International Conference on Materials Science & Technology (ICMTECH-2016), March 1-4 at Conference Hall, University of Delhi, India.
  8. Jain A. and Panwar A.K. (2014),  “Investigation of Dielectric and Microstructural properties of Vanadium substituted Barium titanate Ceramics”’ International Conference on recent advances in Nanoscience and Nanotechnology, December 15-16, 2014 at Centre for Nanonoscience, Jawaharlal Nehru University, New Delhi, India.
  9. Saroha Rakesh and Panwar A.K. (2014), “Structural, Optical and Electrical Properties of Synthesized ZnO Nanoparticles” International E-Workshop/Conference on Computational Condensed Matter Physics and Materials Science (IWCCMP-2014), November 25-30 at Computational Nanoscience& Technology Lab, ABV-IIITM, Gwalior, India.
  10. Saroha Rakesh and Panwar A.K. (2014), “Synthesis and Physico-Chemical Characterization of Cathode Material, LiFe1-xZnxPO4(x=0, 0.1) for Lithium Ion Batteries”, International Conference on ‘Emerging Materials and Application’ (ICEMA-2014), March 7-9 at Department of Physics, Saharanpur Campus, IIT Roorkee.
  11. Upadhayay R. K. and Panwar A.K (2014) “Physico-Chemical Characterization of Cathode Material, Li1-x(Mn0.4Ni0.4Fe0.2)1-xO2 (x=0.2) for Lithium ion Batteries”,  International Conference on Advanced Developments in Engineering and Technology, February 15-16 at LCKE Ghaziabad, UP.
  12. Maikhuri Neelam, Devi Sheela, Panwar A. K., Jha A. K., (2013), Dielectric, Ferroelectric and Transport Properties of Co Substituted BaTiO3 , ICAE, The 2nd International Conference on Advanced Electromaterials, Novenber 12-15 at Jeju, S.Korea.
  13. Panwar A. K., Barthwal S. K. and Ray S., (2010), “Wettability Enhancement of Polycarbonate (PC) Surface under Different Gaseous Environments and Its impact on Adhesive Joining” National Conference on , October 23-24, department of physics, JUET, Guna (MP) India.   
  14. Panwar A. K., Singh G., Sil A. and Ghosh S., (2009) “Physico-chemical properties of LiNi1/3Mn1/3Co1/3O2 cathode material for lithium Ion Battery”, paper presented in 54th DAE conference held on Dec. 14-18 at Baroda (GJ), INDIA.
  15. Panwar A. K., Barthwal S. K. and Ray S., (2008), "surface modification of PC by DC glow discharge and its effect on wetting and adhesion” paper presented in the International Conference, ‘CONIAPS X’ held on Jan. 12-14 at department of physics, GGU Bilashpur.
  16. Singh G., Panwar A. K., Sil A. and Ghosh S., (2008) “Synthesis and characterization of LiMn2O4 nanoparticles using citric acid as chelating agent”, paper presented in the International Conference, held on Dec. 7-10 at department of Metallurgical & Materials Engineering, I.I.T. Roorkee, Roorkee (U.A.).
  17. Panwar A. K., Singh G., Mondal S, Ghosh S., (2006) “Investigation of cathode materials for Lithium ion battery technology”, paper presented in ‘International workshop on energy storage devices’, held on Oct. 6-7, at RCI Hyderabad.
  18. Rana K. S., Panwar A. K., Sharma Y., Sil A. and Ray S., (2006) “Preparation of cathode materials for lithium ion battery technology by solid state reaction route”, paper presented in International workshop on energy storage devices’, held on Oct. 6-7, at RCI Hyderabad.
  19. Panwar A. K., Barthwal S. K. and Ray S., (2004), " Surface modification of polycarbonate by air DC glow discharge plasma" Fourth International symposium on ‘Surface modification of polymer: Relevance to Adhesion’, June 20-22.
  20. Panwar A. K., Barthwal S. K. and Ray S., (2004), "Physico-chemical changes in polycarbonate surface due to dc glow discharge treatment" DAE Solid State Physics Symposium, Dec, 26 -29.

BOOKS/BOOK CHAPTERS (IF ANY)

Book Chapters

  1. Tanwar P., Panwar A. K., Singh S., Srivastava A.K., (2024) “Advances in the Thermoelectric, Optical and Electronic Properties of Chalcogenide Materials”, A Close Look at Thermoelectric Materials, pp.105-125.
  2. Jain A., Panwar A.K., Tyagi P.K (2022), “Structural, Morphological and Electrochemical Studies of Complex Spinel Titanate Li2ZnTi3O8” Proceedings of the International Conference on Atomic, Molecular, Optical & Nano Physics with Applications: CAMNP 2019, Springer Singapore, 201-209.
  3. Sharma Snigdha, and Panwar A. K., Tripathi M. M., (2021), Structural, Electrochemical, Thermal and Electrical performance of LiMnPO4 cathode material for Lithium-ion Batteries, published as book chapter in“Recent Research Trends in Energy Storage Devices: Select Papers from IMSED 2018” Editors: Sharma, Y., Varma, G.D., Mukhopadhyay, A., Thangadurai, V., pp.- 158-170, Publisher: Springer Nature.
  4. Rajput Shivangi and Panwar A. K., (2021), Development of Novel Ternary SnSb-ZnO Nanocomposites as Alternative Anode Material for Lithium-Ion Batteries, published as book chapter in  “Recent Research Trends in Energy Storage Devices: Select Papers from IMSED 2018” Editors: Sharma, Y., Varma, G.D., Mukhopadhyay, A., Thangadurai, V., pp – 47-157, Publisher: Springer Nature.

PATENTS (IF ANY)

Patents (Published/ Under FER) 

1. Patent Application no. :202511056290: A NASICON Type Solid State Electrolyte for All Solid State Sodium Ion Batteries, and Method of Preparing the same, Publication date: 27/06/25, Patentee: Delhi Technological University, Inventors: 'Sharad Singh Jadaun, Puneet Kumar, Amrish K. Panwar, Geetanjali'.
2. Patent Application no. :202511013946: Advanced Step Sintering Method for the Synthesis of Ceramic Solid State Electrolyte and use thereof, Publication date: 07/03/25, Patentee: Delhi Technological University, Inventors: 'Sharad Singh Jadaun, Puneet Kumar, Amrish K. Panwar, Geetanjali'
3. Patent Application no. :202511076422: System and Method for Lithium/Sodium Melting for Enhanced Electrode Electrolyte Interface Engineering, Publication date: 05/09/25, Patentee: Delhi Technological University, Inventors: Sharad Singh Jadaun, Amrish K. Panwar, Geetanjali

Patent (Design Granted)

Design No. : 464449-001, Title: "Device for Nanoparticles Synthesis", Date of Patent Grant:  03-07-2025 

Patentee: Dr. Praveen Kumar, Dr. Mukul Pastor, Dr. Amrish Panwar, Dr. K. N. Singh 

 

HONOURS AND AWARDS (IF ANY)

 

Honours and Awards

  • Research Excellence Award - Awarded by DTU under 'Commendable Research Category' for year 2018, 2019, 2021, 2023 - 2025.
  • 2020 Silver Award: Research paper awarded as Silver Award for Top paper by “Journal of Traffic and Transportation Engineering (English Edition)” for the year 2020.
  • Outstanding Reviewer – Awarded as outstanding reviewer by International Journal “Ceramic International” for the year 2016.
  • Young Scientist in Physical Sciences - Science and Engineering Research Board, Department of Science and Technology (SERB-DST), Government of India, New Delhi (2011).
  • Postdoctoral Research Associate- Department of MME, IIT Kharagpur (W.B.) during 2006 to 2008.
  • Jury Member (DST INSPIRE)- National Level Exhibition and Project Competition (NLEPC) under INSPIRE Awards component of Department of Science and Technology (DST), New Delhi (2013 -2016).
  • Science Talent Quiz winner – Member of Science Talent Quiz winner team (First prize), Quiz was organized by department of Physics, I.I.T. Roorkee (UK) in the year 2001.
  • JRF & SRF Award: Awarded as JRF of University/institute, under UGC grant, Govt. of India (1999 -2001) & SRF under MHRD scheme (2001-2004) at IIT Roorkee (UK), India.

 

SPONSORED/CONSULTANCY PROJECTS

Research Projects (Completed/ Ongoing)

  1. Sponsored Project on “Development of alternative cathode materials for high energy density lithium ion battery technology”, funded by SERB- DST, Govt. of India (2012-2016), project cost:  25 lakh, (Successfully Completed)
  2. Sanctioned Equipment grant for Lithium ion/ Sodium ion batteries/ Super capacitor research for “Electrochemical analyzer” under FIST – DST, Govt. of India (2012 – 2017), Rs. 23 Lakh against equipment, (Project Completed).    
  3.  Sanctioned Research Project as Co-PI, on "Utilization of agricultural waste as an electrode material for energy storage devices", funded by SERB- DST, Govt. of India (2018-2019,) project cost:  Rs, 41.50 lakh with P.I.  Dr. Anurag Gaur, Dept. of Physics, National Institute of Technology, Kurukshetra, Thanesar, Kurukshetra, Haryana-136ll9. (Completed). 
  4. DTU Research Project on: Development of High-Capacity, Long Cyclable and Cost –Effective Cathode/Anode Materials for Rechargeable Sodium /Lithium ion Batteries, Rs. 5.0  Lakh (Completed)
  5. DTU, R& D project on: Fabrication of energy storage Devices using low-cost materials, DTU project (2025-26), Rs. 10 lakh (ongoning)  

START-UPS (IF ANY)

-

MOOC COURSES DEVELOPED (IF ANY)

-

PROFESSIONAL DEVELOPMENT

ADVISEES

ANY OTHER INFORMATION

Duties Assigned at Department/ University Level 

  • Coordinator, M. Sc (Physics), Department of Applied Physics (2019 onwards).
  • Department PhD coordinator (2022-2024)
  • Member curriculum & scheme preparation for Integrated BSc & MSc Program department of Applied Physics
  • Member Department Research Committee (DRC) of  the Department of Applied Physics (2023-2025).
  • Core Committee Member, NBA team at the department level (2023).
  • Admission Coordinator, Department of Applied Physics, M.Sc. Physics (2019 onwards).
  • Special Invitee BOS, Dept. of Applied Physics DTU
  • Lab In-charge, Condensed Matter Physics (EP-202), B.Tech (E.P.) 4th Sem
  • Lab In-charge, Alternative Energy Storage & Conversion Devices (EP-404) B.Tech (E.P.) 8th Sem
  • Member of Anti-ragging committee, DTU
  • Member Secretary department library Committee.
  • Member of ISO  internal audit team for various department/centers/branches of DTU since 2018 to till date.
  • Criteria In-charge of Section 4.0 , Academic Audit as assigned by department
  • Lab In-charge, Lithium-ion Battery Technology Research lab.
  • Member, Question Paper Audit Committee, Dept. of Applied Physics, DTU
  • Member, Grade Moderation Committee, Dept. of Applied Physics, DTU
  • Co-Convener of International Conference on: Atomic, Molecular, Material, Nano and Optical Physics with Applications (ICAMNOP-2023) organized by the Department of Applied Physics, DTU, Delhi (Dec 18-20, 2023).
  • Co-Incharge Advance Instrumentation Centre, Applied Physics, DTU
  • Project/Dissertation Coordinator MSc Physics 2019 onwards. 
  • Member SRC committees member within & outside department at DTU.
  • Member, Syllabus Revision Committee NEP 2020 assigned by DTU
  • Member secretary for SRC composition of the department till July 2024.
  • Member core team NAAC committee department of Applied Physics DTU
  • Protocol officer from IQAC with NAAC & NBA Team Member
  • Members of many disciplinary committees  teams in various university events (E-Cell, Engifest, other cultural/ Tech fests etc.)
  • Member, Ordinance Revision Committee assigned by Dean PG, DTU for MSc Physics as per NEP 2020.
  • Performed the duties of student registration and degree distribution on 19th December, 2024 during 11th Convocation at DTU
  • Member DRC committee of Department of Civil Engineering, DTU
  • Co-coordinator IQAC team , DTU
  • Coordinator & core team member for NBA accreditation
  • Member for the proposal of new M. Sc. Program
  • Member of review committee to review specific teaching laboratories of the department
  • Member of MSc ordinance upgradation team as per NEP 2020 for MSc programs.
  • Member of IQAC committee ‘Teacher to represent all level members’ for 2 years 
  • Member DST FIST project proposal submission committee from Department of applied Physics 
  • Member of UG students fee concession committee assigned by Dean UG, DTU