Dr. Raminder Kaur

Discipline of Polymer Science and Chemical Technology, Department of Applied Chemistry, Delhi Techno

Phone:9717212152
Email: raminderkaur@dce.ac.in

Qualifications

PhD – Chemical Engineering, (IIT-Delhi; 2009), M.Tech Polymer Technology (PU, Chandigarh; 2002), B Tech- Chemical Engineering, (BCET, Gurdaspur;2000)

Areas of Interest

Bio-based Polymeric Materials (Bio-based PU Foams, Adhesives and Composites; Non Isocyanate Polyurethane (NIPU) ); Energy Storage Phase Change Materials: Organic and Inorganic); Pollution Abatement (Wastewater Treatment); Conducting Polymers; Reaction Kinetics

PROFESSIONAL EMPLOYMENT

ASSISTANT PROFESSOR, DELHI TECHNOLOGICAL UNIVERSITY, DELHI, OCTOBER 2010-TILL DATE

SENIOR RESEARCH FELLOW, INDIAN INSTITUTE OF CHEMICAL TECHNOLOGY (IICT), HYDRABAD, MAY 2003 TO AUGUST 2007)

RESEARCH SCIENTIST, CENTRE FOR POLYMER SCIENCE, IIT DELHII, APRIL 2003 TO MAY 2003

AWARDS /PRIZES/ HONOUR’S / RECOGNITIONS:

  • Commendable Research Award, DTU (in recognition for research), 2023 (Nominated), 2022, 2021, 2019, 2018, 2017.
  • Awarded DRDO Research Project by ER&IPR, DRDO, MINISTRY OF DEFENCE, in 2015.
  • Award of Senior Research Fellowship (SRF) awarded by Council of Scientific and Industrial Research (CSIR), Govt. of India in May 2003.
  • Merit Certificate by Education Department Punjab Govt. under national scholarship scheme in recognition of the high position secured in the list of meritorious candidates in primary classes.

    PROJECTS UNDERTAKEN

    Title of Project

    Status

    Duration

    Grant (Rs/-)

    Sponsoring Agency

    SYNTHESIS AND STUDY OF NANO-STRUCTURED POLYANILINE FOR ERADICATION OF HAZARADOUS WASTE: A NEOTERIC ADSORBENT FOR WASTEWATER TREATMENT

    COMPLETED

    2 YEARS

    4,35,000/-

    DTU DELHI

    (UNDER RESEARCH GRANTSCHEME)

    DEVELOPMENT OF ENVIRONMENT FRIENDLY RIGID POLYURETHANE FOAM FOR MULTIPURPOSE USE

    COMPLETED

    3 YEARS

    32,60,000/-

    DRDO, DELHI

    PROCESS STUDIES IN A MULTIPHASRE REACTOR: KETAZINE PRODUCION FROM HYDROGEN PEROXIDE AND AMMONIA.

    COMPLETED

    3 YEARS

    ----

    CSIR, DELHI

    (IICT HYDERABAD)

    RESEARCH PUBLICATIONS (International /National Journals)

  • Pooja Singh, Priti and Raminder Kaur (2024), “Synthesis and Rheological Analysis of Non-Isocyanate Polyurethanes Blended with Poly(vinyl alcohol)”, Journal of Industrial and Engineering Chemistry, _______________ ISSN. 1226086X, SCI indexed) (Elsvier), DOI: https://doi.org/10.1016/j.jiec.2024.04.050 (Impact Factor-6.1).
  •  Surya Tanwar and Raminder Kaur (2024), “Role of polymers in encapsulation and shapestabilization of phase change materials (PCMs) for thermal energy storage applications: an overview” Academa Material Science, 1(1),1-19. (ISSN: 2997-2027), https://doi.org/10.20935/AcadMatSci6184.
  • Surya Tanwar and Raminder Kaur (2024), “Fabrication and evaluation of polyurethane supported form-stable PCMs” Energy Storage, 6, e581, ISSN: 2578-4862, (SCI indexed), Wiley, DOI: https://doi.org/10.1002/est2.581 (Impact Factor- 3.2)
  • .Neelam Yadav and Raminder Kaur (2024), Innovations in Packaging to Monitor and Maintain the Quality of the Food Products, Journal of Packaging Technology and Research, 8, 15–50,  ISSN:2520-1034,  https://doi.org/10.1007/s41783-024-00163-4
  • Pooja Singh and Raminder Kaur (2023), “One pot synthesis of bio-based porous isocyanatefree polyurethane materials”, Materials Letters, 331, 133433, ISSN: 1873-4979, (Springer), (SCI indexed) (Elsvier), DOI: https://doi.org/10.1016/j.matlet.2022.133433  (Impact Factor- 3.0)
  • Pooja Singh and Raminder Kaur (2022), “Sustainable Xylose-Based Non-Isocyanate Polyurethane Foams with Remarkable Fire-Retardant Properties”, Journal of Polymers and the Environment,  03 November 2022, ISSN: 1572-8919,  (SCI indexed) (Springer), DOI: https://doi.org/10.1007/s10924-022-02638-4  (Impact Factor- 5.3)
  • Surya Tanwar  and Raminder Kaur (2022), “Fabrication and investigation on influence of metal oxide nanoparticles on thermal, flammability and UV characteristics of polyethylene glycol based phase change materials”, Journal of Energy Storage, 54, 105318, ISSN:2352-152X, (SCI indexed) (Elsvier), DOI: https://doi.org/10.1016/j.est2022.105318 (Impact Factor-9.4)
  • Raminder Kaur, Pooja Singh, Surya Tanwar, Gunjan Varshney and Sarla Yadav (2022), “Assessment of Bio-Based Polyurethanes: Perspective on Applications and Bio-Degradation”, Macromol, 2, 284–314, June 2022, ISSN: 2673-6209,(Scopus Indexed),  DOI: https://doi.org/10.3390/macromol2030019
  • Lokesh Kumar, Jai Gopal Sharma, and Raminder Kaur (2022), “Catalytic Performance of Cow-Dung Sludge in Water Treatment Mitigation and Conversion of Ammonia Nitrogen into Nitrate”, Sustainability, 14(4), 2183, ISSN 2071-1050, (SCI Indexed), (MDPI), DOI: https://doi.org/10.3390/su14042183 (Impact Factor-3.9)
  • Arkya Bagchi, Akash Chowdhary, Abhishek Takki and Raminder Kaur (2022), “Simulation and Optimization of Ultrasonic Transducer”, Special Issue on Recent Advancements in the Electrical & Electronics Engineering, International Journal of Electrical and Electronics Research,10(3), 423-428, ISSN: 2347-470X (Scopus Indexed).
  • Sachin Kumar, Aizak Debbarma, Pooja Singh, Raminder Kaur (2022), “Metal Organic Framework for Energy Application”, Invertis Journal of Renewable Energy, 12(4),177-194) ISSN: 2454-7611, DOI : 10.5958/2454-7611.2022.00016.9.
  • Lokesh Kumar, Raminder Kaur, Jaigopal Sharma (2021), “The efficiency of zeolites in water treatment for combating ammonia – An experimental study on Yamuna River water and treated sewage effluents”, Journal of Inorganic Chemistry Communications, 134, 108978, ISSN: 1387-7003(SCI Indexed) (Elsevier) DOI: https://doi.org/10.1016/j.inoche.2021.108978  (Impact Factor- 3.8)
  • Surya Tanwar and Raminder Kaur (2021), “Development and Investigation of Microencapsulated Caprylic Acid-Based Phase Change Materials for Thermal Energy Storage Applications”. International Journal of Energy Research, 45(12): 17302-17314, ISSN:1099-114X(SCI Indexed), (Wiley), https://doi.org/10.1002/er.6611 (Impact Factor- 4.6)
  • Raminder Kaur and Mukesh Kumar (2021), “Practice of Taguchi design of experiments in the valuation of mechanical behavior of rigid polyurethane foam composites” Polymers and Polymer Composites, 29(9), 1075-1083, ISSN: 14782391  (SCI Indexed), (SAGE), DOI:10.1177/09673911211041357, (Impact Factor- 2.1)
  • Monika Duhan and Raminder Kaur, (2021), “Nano-Structured Polyaniline as a Potential Adsorbent for Methylene Blue Dye Removal from Effluent”, Journal of https://doi.org/10.3390/jcs5010007 (MDPI). (Impact Factor- 3.3).
  • Ammu Varughese, Raminder Kaur and Poonam Singh (2020), “Green Synthesis and Characterization of Copper Oxide Nanoparticles Using Psidium guajava Leaf Extract”, Material Science and Engineering, 961. 012011, ISSN No. 1757-898, (SCI indexed), (IOP Science), DOI: 10.1088/1757-899X/961/1/012011 (Impact Factor- 0.53).
  • Monika Duhan and Raminder Kaur, (2020), “Adsorptive removal of methyl orange with polyaniline nanofibers: an unconventional adsorbent for water treatment”, Environmental Technology,41 (23), 2977-2990, ISSN No. 2158-5857,(SCI indexed), , Taylor & Francis, DOI: 10.1080/09593330.2019.1593511, (Impact Factor- 2.8).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia (2020), “Mechanical and Thermal properties of bio-based rigid PU foams: Effect of Aramid fibre”, Teresian International Journal of Chemical Sciences, 1(1), 7-14. ISSN No. 2158-5857
  • Raminder Kaur and Mukesh Kumar, (2020) “Addition of Anti-Flaming Agents in Castor Oil based Rigid Polyurethane Foams: Studies on Mechanical and Flammable Behaviour”, Materials Research Express, Composite Sciences, 5(1), 7 , ISSN No.2504-477X, (SCI Indexed), , DOI:   7. 015333, 1-10, (IOP Science), (SCI indexed), ISSN No. 2053-1591, https://doi.org/10.1088/2053-1591/ab68a2 (Impact Factor- 2.3).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia, (2019) “Response surface methodological evaluation of drilling for the optimization of residual compressive strength of bio-based RPUF composite”, Materials Research Express, 6 125372,1-15, ISSN No. 2053-1591, (IOP Science), (SCI indexed), , https://doi.org/10.1088/2053-1591/ab5ea4 (Impact Factor- 2.3)
  • Monika Duhan and Raminder Kaur, (2019) “Phytic Acid Doped Polyaniline Nanofibers: An Advanced Adsorbent for Methylene Blue Dye Removal”, Environmental Nanotechnology Monitoring and Management, 1212 (2019) 100248,1-9,  ISSN No. 2215-1532, (Scopus indexed) (Elsvier), DOI:  10.1080/09593330.2019.1593511.
  • Anuja Agrawal, RaminderKaur, (2019), “Effect of Nano Filler on the Flammability of Bio-Based RPUF”, Integrated Ferroelectrics, 201 (1),20-28, ISSN No.‎1058-4587, (SCI Indexed), Taylor & Francis, DOI: 10.1080/10584587.2019.1674820, (Impact Factor- 0.7).
  • Neelam Yadav and Raminder Kaur, (2019) “Environment Friendly Qualitatively Responsive Ethyl Cellulose Films as Smart Food Packaging, Materials Express, 9(7),793-800, ISSN No. 2158-5857, (SCI Indexed), American Scienti?c Publishers, doi:10.1166/mex.2019.1559, (Impact Factor- 1.650).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia, (2019), “Vegetable Oil Based Conducting Rigid PU Foam” e-Polymers , 19 (2019) 411-420, ISSN No. 1618-7229 , (SCI indexed), De-Gruyters, DOI: https://doi.org/10.1515/epoly-2019-0042, (Impact Factor- 3.7).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia, (2019), “Flame Retardancy of Ceramic Based Rigid Polyurethane Foam Composites” Journal of Applied Polymer Science,136, 48250 (1-10), ISSN No. 1097-4628, (SCI indexed),Wiley,DOI: 10.1002/app.48250, (Impact Factor- 3.0).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia, (2019), “Investigation on Flammability of Rigid Polyurethane Foam-Mineral Fillers Composite” Fire and Materials, 43, 917–927, ISSN No. 1099-1018, (SCI indexed), Wiley, DOI: 10.1002/fam.2751, (Impact Factor- 1.9).
  • Neelam Yadav Raminder Kaur, (2019)“Biodegradable polymeric film for food packaging”, Journal of Applied Packaging Research, 1(2), 21-35, ISSN No.1557-7224, (DOAJ Index), The Rochester Institute of Technology, (Impact Factor- 0.105).
  • Anuja Agrawal, Raminder Kaur, R. S. Walia, (2019), “Engineering Optimization of Process Parameters for Polymers: An Overview” International Journal of Experimental Design and Process Optimisation, 6 (2), 89-126, ISSN:2040-2260, Inderscience, DOI: 10.1504/IJEDPO.2019.101718.
  • Manjeet Malik and Raminder Kaur,(2018), Synthesis of NIPU by the carbonation of canola oil using highly efficient 5,10,15?tris(pentafluorophenyl) corrolato?manganese(III) complex as novel catalyst", Polymers for Advanced Technologies,29 (3), 2018, 1078-1085, ISSN No. 1099-1581, (SCI indexed), Wiley,https://doi.org/10.1002/pat.4219, (Impact Factor = 3.4).
  • Manjeet Malik and Raminder Kaur,(2018), “Influence of aliphatic and aromatic isocyanates on the properties of polyether-ester polyol based PU adhesive system”, Polymer Engineering and Science, 58(1), 112-117 , ISSN No. 548-2634, (SCI indexed), Wiley,DOI 10.1002/pen.24537 (Impact Factor= 3.2).
  • Manjeet Malik and RaminderKaur,(2018), “Mechanical and Thermal Properties of Castor Oil–Based Polyurethane Adhesive: Effect of TiO2 Filler”, Advances in Polymer Technology, 37(1), 24-30, ISSN No. 1098-2329 , (SCI indexed), Wiley, https://doi.org/10.1002/adv.21637, (Impact Factor=3.1).
  • Raminder Kaur, (2018), “Synthesis and Characterization of Nano-Polyaniline Fibers, International Journal for Science and Advanced Research in Technology, Vol 4(4), 2126-2129, ISSN No. 2395-1052, (Impact Factor=5.888).
  • Raminder Kaur, (2018) “Effect of Fillers on the Mechanical Properties of Castor Oil based Rigid Polyurethane Foams”, International Journal of Scientific Research and Review, 7(2), 296-302, ISSN No. 2279-543X, (Impact Factor=6.1).
  • Anuja Aggarwal, Raminder Kaur, R S Walia, (2017),"PU Foam Derived from Renewable Sources: Perspective on Properties Enhancement: An Overview", European Polymer Journal, 95, 255-274, ISSN No. 0014-3057, SCI indexed), Elsevier,http://dx.doi.org/10.1016/j.eurpolymj.2017.08.022, (Impact Factor -6.0).
  • Mukesh Kumar, Raminder Kaur (2017), "Glass fiber reinforced rigid polyurethane foam: synthesis and characterization", e-Polymers,7(6). 517-52, ISSN No. 1618-7229, (SCI indexed), De-Gruyters, https://doi.org/10.1515/epoly-2017-0072 (Impact Factor-3.7).
  • Raminder Kaur and Mukesh Kumar, (2013), “Function of silicon oil in the castor oil based rigid polyurethane foams”, Journal of Polymer Engineering, Vol 33 (9), 857-861, ISSN No. ISSN No. 0334-6447, (SCI indexed), De-Gruyters, DOI 10.1515/polyeng-2013-0083(Impact Factor- 2.0).
  • Mukesh Kumar and Raminder Kaur, (2013),“Effect of Different Formulations of MDI on Rigid Polyurethane Foams based on Castor Oil” International Journal of Scientific Research and Reviews, Vol 2 (1) Special Issue April – May 2013, 29-42, ISSN: 2279–0543, (Impact Factor- 1.536).
  • Vazid Ali, Raminder Kaur, G. B. V. S. Lakshmi,, Anand Kumar, Kiran Kumari, Sushil Kumar, (2012), “ Electrical conductivity and dielectric parameters of polyaniline doped with CuClO4.4BN in aqueous DMSO solvent”, Advances in Polymer Technology,  31(4), 374–379, ISSN No. 1098-2329, (SCI indexed), Wiley, https://doi.org/10.1002/adv.20260, (Impact Factor-3.1).
  • Raminder Kaur, K.D.P. Nigam and M. Ramakrishna, (2010), “Effect of ketone concentration        on ketazine formation”, Chemical Engineering Communications, 197 (4), (2010) 481-490, ISSN No. 1563-5201, (SCI Indexed), Taylor & Francis,https://doi.org/10.1080/00986440903288138, (Impact Factor- 2.5).
  • Raminder Kaur, M. Ramakrishna and K.D.P. Nigam,(2008), “Kinetics studies of ketazine formation; Effect of temperature and catalyst concentration”, The Canadian Journal of Chemical Engineering, 86 (1), 99-104, ISSN No.1939-019X, (SCI indexed), Wiley, DOI: 10.1002/cjce.20013, (Impact Factor-2.1).
  • Raminder Kaur, M. Ramakrishna and K.D.P. Nigam,(2007), “Role of dispersed phase in gas-liquid reactions: A review”, Reviews in Chemical Engineering, 23 (3-4),247-298, (2007), 247-298,IISN No. 2191-0235,(SCI indexed), De-Gruyters,DOI: 10.1515/REVCE.2007.23.3-4.247, (Impact Factor-4.7).
  • Raminder Kaur, M. Ramakrishna and K. D. P. Nigam,(2007) “Agitation effects in a gas-liquid-liquid reactor system: Methyl ethyl ketazine production”, The International Journal of Chemical Reactor Engineering, 5, A27, ISSN No.1542-6580, (SCI indexed), De-Gruyters, DOI: 10.2202/1542-6580.1401, (Impact Factor-1.5).
  • Vazid Ali, Raminder Kaur, Neel Kamal, Sukhmehar Singh, S.C. Jain, H.P.S. Kang, M. Zulfequar and M. Husain, (2006), “Use of Cu+1 dopant and its doping effects on polyaniline conducting system in water and tetrahydrofuran”, Journal of Physics and Chemistry of Solids, 67, 659–664, ISSN No. 0022-3697,(MSCI Indexed), Elsevier, doi:10.1016/j.jpcs.2005.10.172 , (Impact Factor-4.0).

    PATENT

    Anuja Agrawal, Raminder Kaur, R. S. Walia (2024), “Bio-Based Rigid Polyurethane Foam Composition and Method Thereof, by Delhi Technological University, Indian Patent No: 516877 (Application No: 201911027962).

    CHAPTERS IN BOOK (S)

  • Pooja Singh, Gunjan Varshney and Raminder Kaur (2024), Arsenic Contamination in Drinking Water and Health, , Chapter 3, Part-II (Health Risks Linked to Arsenic Exposure in Food and the Environment), Arsenic Toxicity Remediation. Emerging Contaminants and Associated Treatment Technologies, 125-144, ISBN 978-3-031-52614-5, ISSN 2524-6410, Springer, Cham. https://doi.org/10.1007/978-3-031-52614-5_7.
  • Raminder Kaur and Monik Duhan (2017), Polyaniline as an inceptive dye adsorbent from effluent, chapter 3, Advanced materials for wastewater treatment, 51–100, ISBN-978-1-119-40776-8, Wiley: Martin Scrivener, Sweden.

    RESEARCH GUIDANCE:

    (a). Ph.D Guidance

    Sl. No.

    Name of the Student with Regd. No.

    Title of the thesis

    Discipline & Name of the University

    Awarding year

    1.

    MUKESH KUMAR (2K12/PhD/AC/04)

    SYNTHESIS AND CHARACTERIZATION OF ANTI FLAMMABLE CASTOR OIL BASED RIGID POLYURETHANE FOAMS

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2017

    2.

    MANJEET MALIK

    (2K12/PhD/AC/09)

    DEVELOPMENT OF VEGETABLE OIL BASED POLYURETHANE ADHESIVES.

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2017

    3.

    ANUJA AGRAWAL (2K16/PhD/AC/03)

    DEVELOPMENT AND INVESTIGATIONS OF BIO BASED COMPOSITE RIGID POLYURETHANE FOAM

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2019

    4.

    MONIKA DUHAN                             (2K14/PhD/AC/02)

    STUDIES ON POLYANILINE AS ADSORBENT FOR EFFLUENT TREATMENT.

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2020

    5.

    NEELAMYADAV

    (2K13/PhD/AC/02)

     

    SYNTHESIS AND CHARACTERIZATION OF ECO-FRIENDLY SMART PACKAGING MATERIALS FOR EDIBLES.

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2020

    6.

    LOKESH KUMAR
    (2K17/PhD/AC/15)

    COMPARATIVE STUDIES OF BIOLOGICAL AND CHEMICAL TREATMENT FOR COMBATING AMMONIA IN WATER: AN INTEGRATED APPROACH

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2022

    7.

    SURYA TANWAR

    (2K17/PhD/AC/03)

     

    DEVELOPMENT AND EVALUATION OF POLYMER BASED PHASE CHANGE MATERIALS (PCMS) FOR THERMAL ENERGY STORAGE APPLICATIONS.

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2023

     

    8.

    POOJA SINGH

    (2K19/PhD/AC/08)

    SYNTHESIS AND CHARACTERISATION OF POLYURETHANE MATERIALS DERIVED FROM RENEWABLE SOURCES

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    ONGOING

    9

    MANISHA YADAV

    (2K19/PhD/AC/501)

    REMOVAL OF ANTIBIOTICS FROM PHARMACEUTICAL EFFLUENTS USING NANOFILTERATION PROCESSES

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    ONGOING

    10

    KUDZAI HAMISH RUZVIDZO (2K21/PhD/CH/03)

    STUDIES ON WATER DESALINATION USING OSMOTIC PRESSURE-DRIVEN PROCESSES

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    ONGOING

    11

    GUNJAN VARSHANEY

    (2K21/PhD/AC/501)

    ENCAPSULATION OF PHASE CHANGE MATERIAL FOR THERMAL ENERGY STORAGE SYSTEM

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    ONGOING

    12

    SARLA YADAV

    (2K21/PhD/AC/505)

     

    SYNTHESIS AND CHARACTERISATION OF NANOCOMPOSITES DERIVED FROM DIFFERENT PLANT EXTRACTS

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    ONGOING

    13.

    POOJA YADAV

     

     

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)           

    ONGOING

    14.

    RIYA MALIK

     

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)           

    ONGOING

     

    (b). M.Teh Guidance

    S. No.

    Name of the Student with Regd. No.

    Title of the thesis

    Discipline Name of the University

    Awarding year

    1.

    BIPIN BIHARI RAI

    (2K10/PTE/07)

    SYNTHESIS AND CHARACTERIZATION OF RIGID POLYURETHANE FOAM WITH DIFFERENT FORMULATIONS OF BLOWING AGENT 

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2013

    2.

    ASHISH SHARMA (2K12/PTE/04)

    STUDIES ON THE EFFECT OF VARIOUS FILLERS ON THE PROPERTIES OF RIGID POLYURETHANE FOAM

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2014

    3.

    KAMLESH KUMAR

    (2K13/PTE/09)

    SYNTHESIS OF GLYCEROL BASED NOVEL MONOMER FOR NONISOCYANATE POLYURETHANE (NIPU): BIS((2-OXO-1,3-DIOXOLAN-4-YL) METHYL) (METHYLENE BIS(4,1-PHENYLENE)) DICARBAMATE 

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2015

    4.

    ADITI GUPTA

    (2K14/PTE/13)

    EFFECT OF FILLERS ON CASTOR OIL BASED POLYURETHANE FOAM

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2017

    5.

    OMPRAKASH PARIDA

    (2K14/PTE/17)

    POLYURETHANE BASED CONDUCTING ADHESIVE USING ZINC AND NICKEL NANO-PARTICLES AS FILLER 

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2016

    6.

    RISHI GUPTA

    (2K14/PTE/07)

    CAPACITORS AND CONDUCTING POLYMERS: DEVELOPMENT OF CONDUCTING POLYMERS

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2016

    7.

    HITESH GOEL (2K15/PTE/12)

    TAGUCHI METHOD’S OPTIMIZATION OF MILLING OPERATIONS ON GRAPHENE OXIDE-EPOXY NANOCOMPOSITE

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2018

    8.

    PRASHANT MANI SHANDILYA (2K16/PTE/04)

    STUDIES ON CARBON FIBER REINFORCED POLYURETHANE-EPOXY COMPOSITE: MECHANICAL PROPERTIES EVALUATION

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2018

    9.

    DEVVRAT TIWARI

    (2K17/PTE/02)

    ADSORPTIVE REMOVAL OF HEAVY METAL IONS USING POLYANILINE

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2019

    10.

    AMMU VARUGHESE

    (2K18/PTE/01)

    GREEN SYNTHESIS AND CHARACTERIZATION OF COPPER OXIDE NANOPARTICLES USING PSIDIUM GUAJAVA LEAF EXTRACT

    POLYMER TECHNOLOGY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2020

    11.

    JITENDRA SINGH (2K19/PTE/04)

    STUDY ON COMBUSTIBLE CARTRIDGE CASES AND POLYMERIC RESIN BINDERS IN ITS COMPOSITION

    POLYMER TECHNOLOGY (DELHI TECHNOLOGICAL UNIVERSITY)

    2021

     

    (c). MSc. Project Guidance

    S. No.

    Name of the Student with Regd. No.

    Title of the thesis

    Discipline & Name of the University

    Awarding year

    1.

    SACHIN KUMAR

    (2K21/MSCCHE/39)

    AIZAK

    (2K21/MSCCHE/03)

    METALLIC-ORGANIC FRAMEWORK FOR ENERGY APPLICATIONS

    MSc CHEMISTRY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2023

    2.

    ANJALI TANWAR

    (2K21/MSCCHE/52)

    A REVIEW ON PHASE CHANGING MATERIAL

    MSc CHEMISTRY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2023

    3.

    AMIT KUMAR

    (2K21/MSCCHE/53

    REMOVAL OF HEAVY METAL IONS USING   POROUS MATERIALS

    MSc CHEMISTRY

    (DELHI TECHNOLOGICAL UNIVERSITY, DELHI)

    2023

    MEMBERSHIP OF PROFESSIONAL/ ACADEMIC BODIES, SOCIETIES:

  • LIFE MEMBER OF SOCIETY “INDIAN INSTITUTE OF CHEMICAL ENGINEERS” IECHE (MEMBERSHIP NO.: LM-61053).

  • LIFE MEMBER OF “THE SOCIETY OF POLYMER SCIENCE”, INDIA (MEMBERSHIP NO.: 472)
  • LIFE MEMBER OF “ASIAN POLYMER ASSOCIATION” (MEMBERSHIP NO.: L517)
  • LIFE MEMBER OF “INDIAN SCIENCE CONGRESS ASSOCIATION” (MEMBERSHIP NO.: L39026)
  • LIFE MEMBER OF “MATERIALS RESEARCH SOCIETY OF INDIA” (MEMBERSHIP NO.: LMB 3116)
  • LIFE MEMBER OF “SOCIETY FOR MATERIALS CHEMISTRY” (MEMBERSHIP NO.: LM 1160)
  • LIFE MEMBER OF “INDIAN SOCIETY OF ANALYTICAL SCIENTISTS” (LM-2019-19)

  • REVIEWER: 

    INT. J. OF APLIED POLYMER SCIENCE, MATERIAL RESEARCH EXPRESS, JOURNAL OF FIRE ENGINEERING, INDUSTRIAL CROPS AND PRODUCTS, HELIYON, SOUTH AFERICAN JOURNAL OF CHEMICAL ENGINEERING, SMALL, POLYMER COMPOSITES, AIR WATER AND SOIL POLLUTION, JOURNAL OF FIRE SCIENCES, POLYMERS AND POLYMER COMPOSITES, ADVANCES IN MATERIAL PROCESSING TECHNOLOGIES, JOURNAL OF POLYMERS AND ENVIRONMENT, INDUSTRIAL CROPS AND PRODUCTS, CHEMICAL ENGINEERING AND TECHNOLOGY, COMBUSTION SCIENCE AND TECHNOLOGY.

     

     

  • MEMBER ADVISORY BOARD FOR THE ANNUAL TECHNICAL MAGAZINE OF THE DEPARTMENT “RASAYAN”
  • MEMBER OF THE EDITORIAL BOARD OF CHITKARA UNIVERSITY CHEMISTRY JOURNAL: CHITKARA CHEMISTRY REVIEW(Reference No. CU/CUP/JCE/2020/09/39 dated 28-09-2020).

Last Updated : 2024-05-04 15:31:22