Mob: +919990927342

Email: srinivaskrovvidi@dtu.ac.in

Qualifications:

M.Tech., MBA(Executive), Ph.D.

Areas of interest:

Engineering Materials, Dynamics of machines, Composite materials and Non-Conventional Machining.

Membership of Professional societies:

1. Member of Institution of Engineers (India).
2. Life member of ISTE.
3. Life member of Powder Metallurgy Association of India.

Teaching experience:

Total teaching Experience : 31 years (Approx)

UG level : 22 years(approx)

PG level: 14 years

No of M.Tech. Projects guided :12

No of Ph.D. completed: 01

No of Ph.D. supervision undergoing:06 (Joint supervision)

RESEARCH PAPERS PRESENTED AT INTERNATIONAL CONFERENCES:

Krovvidi Srinivas, Yamika Patel, “Design stability of Quadrotor to be used in Precision Agriculture”, International Conference on Advanced Production and Industrial Engineering, Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during December 9-10, 2016.

Krovvidi Srinivas, Yamika Patel, “Design and Analysis of Propeller used in UAV”, International Conference on Advanced Production and Industrial Engineering, Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during December 9-10, 2016.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “A review on the effect of Abrasive size on surface finishing”, International Conference of Advance Research and Innovations (ICARI 2017), 29^th January 2017.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Study of Segregation effect in Magnetic abrasive finishing process” , International Conference of Advance Research and Innovations (ICARI 2017), 29^th, January 2017.

Krovvidi Srinivas, Yamika Patel, “CFD analysis of Propeller blade design for Quadrotor”, International Conference on Advanced Production and Industrial Engineering (ICAPIE-2017), Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi during October 6^th- 7^th,2017.

Krovvidi Srinivas,“ Analysis of fluid flow characteristics at various Reynolds numbers, International Conference on Advanced Production and Industrial Engineering (ICAPIE-2017), Organised by Department of Mechanical Engineering, Delhi Technological University, Delhi, during 6^th- 7^th October 2017.

Krovvidi Srinivas, “Design analysis of Composite material springs”, International Conference of Advanced Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas and Vasishta “Corrosion and Remedies in dry type fire sprinkler system in LPG Bottling plant”, International Conference of Advance Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas, “Launch pad for multirotor unmanned Aerial vehicle using Composite material ”, International Conference of Advance Research and Innovations (ICARI 2018), 28^th  January, 2018.

Krovvidi Srinivas, Anant Bhardwaj, , “Pressure variation in abrasive flow machining: Modelling and simulation”, International Conference on Advanced Production and Industrial Engineering(ICAPIE-2018), Organised by Centre for Advanced Production and Industrial Engineering Research(CAPIER), Delhi Technological University, Delhi during October 5^th- 6^th 2018.

Krovvidi Srinivas, A K Agrawal and  Qasim Murtaza, “Analysis of residual stress of AL6351T6 and Brass machined with CNC milling machine”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

Krovvidi Srinivas, A K Agrawal and Qasim Murtaza, “Experimental analysis of Dry sliding wear of C-steel with different hardness”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

Krovvidi Srinivas, Kunal Mathur and L Chaudhary, “Design of Y-Type dual split Hydraulic breaking system”, International Conference of Advance Research and Innovations (ICARI 2019), held on 20^th January 2019.

Krovvidi Srinivas, A K Agrawal and Qasim Murtaza, “Effect of Magnetic pole Orientation on Viscoelastic Magnetic abrasive finishing Process”, International Conference on Emerging Trends in Electro-Mechanical Technologies and Management, organised by HMRITM, New Delhi on 26-27 July 2019.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Effect of shape of Magnet on the machining of Workpiece”, International Conference on Recent Trends in Engineering, Management and Science (ICRETMS-2019) organised by Delhi Institute of Technology Management & Research(DITMR), Faridabad, Haryana held on 26^th-27^th September 2019.

Krovvidi Srinivas and  N S Raghava, “Material study and fabrication of next generation urban unmanned Aerial Vehicle, Aarush-X2” 4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

Krovvidi Srinivas, “Analysis of friction reduction in artificial hip implants achieved using Passive Magnetic bearings” 4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

B.Sesha Venkat Naidu and  Krovvidi Srinivas, “Fracture of E-Glass based composites at low temperatures”,4^th International Conference on Advanced Production and Industrial Engineering(ICAPIE-2019) Organised by Delhi Institute of Tool Engineering, Okhla during December 20-21,2019.

Krovvidi Srinivas, Qasim Murtaza and A K Agrawal, “Simulation of flow parameters & Magnetic forces in machining of internal Cam through viscoelastic Magnetic abrasive flow finishing”, Internal Conference of Advance Research and Innovation (ICARI-2020), organised by Meerut Institute of Engineering Technology, Meerut held on 19^th January2020.

B.Sesha Venkat Naidu and Krovvidi Srinivas, “Fabrication of E-Glass fibre based Composite material with induced Particulate Additives”, International Conference on Integrated Inter disciplinary Innovations in Engineering organised by University Institute of Engineering and Technology, Punjab University, Chandigarh and Government College of Engineering and Technology, Jammu held online on 28^th-30^th August 2020.

Krovvidi Srinivas, “Time dependent variation of Viscosity of Viscoelastic Magnetic abrasive medium”, International Conference of Advance Research and Innovation (ICARI-2021) organised by Meerut Institute of Engineering and Technology, Meerut and International Journal of Advance Research and Innovation held online on 30 January 2021.

Krovvidi Srinivas, “Study of dry sliding wear behaviour of Al6351T6 under variable wear parameters”, International conference of Advance Research and Innovation (ICARI-2021) organised by Meerut Institute of Engineering and Technology, Meerut and International Journal of Advance Research and Innovation held online on 30 January 2021.

Krovvidi Srinivas, “CFD analysis of fluid flow characteristics over propeller blade mounted on UAV at different Reynolds Number”, 3^rd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2021) held during 11^th-13^th February 2021.

Krovvidi Srinivas, Anant Bhardwaj and Rajiv Chaudhary, “Media gel preparation optimisation for Thermal additive Centrifugal abrasive flow machining”, 4^th International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2023) organised by G L Bajaj Institute of Technology & Management, Greater Noida held during 9^th-11^th February 2023

Krovvidi Srinivas, Anant Bhardwaj and Rajiv Chaudhary “Feasible shapes of Centrifugal force generating electrode in Thermal Additive Centrifugal abrasive flow machining process”, Recent innovations in Engineering, Management and Pharmacy organised by IEC group of institutions, Greater Noida held on 24^th & 25^th February 2023.

B.Seshavenkat Naidu, Krovvidi Srinivas, A K agrawal “Stirring parameters that effect the casting output in a stir casting setup”, International Conference of Advance Research and Innovations (ICARI 2025), 2nd February, 2025, Paper ID: ICARI-ME-25-01-57, ISBN-978-93-342-6814-3

Srinivas Krovvidi, Chandan Sharma and Nand Kumar, “A review of the Green Financing in India”, International Conference of Advance Research and Innovations (ICARI 2025), 2^nd February, 2025, Paper ID:ICARI-ME-25-01-61, ISBN-978-93-342-6814-3.

Kapil, Krovvidi Srinivas and  Qasim Murtaza, “Recent advances in the development of aluminium metal matrix composites reinforced with Cerium Oxide and Graphene: A review”, International Conference of Advance Research and Innovations (ICARI 2025), 2nd February, 2025, Paper ID:ICARI-ME-25-01-65, ISBN-978-93-342-6814-3.

Rohit Sahu, Krovvidi Srinivas, A K Agrawal, “Fabrication and Analysis of Aluminium 2024 with Titanium Diboride (TiB2) composite material”, International Conference of Advance Research and Innovations (ICARI 2025), 2^nd February, 2025, Paper ID:ICARI-ME-25-01-67, ISBN-978-93-342-6814-3.

SEMINARS/CONFERENCES/WORKSHOPS ATTENDED:

Attended one day workshop on “Advances in Friction Stir welding/Processing (AFSWP-2017)” organised by the Centre for Advanced Production and Industrial Engineering research, Delhi Technological University on 23^rd March 2017.

Attended the two-day workshop on “Alternative Fuels & Engine Tribology” Organised by the Mechanical Engineering Department, Delhi Technological University, Delhi during 10-11 July 2017.

Attended One day joint workshop on Patent filing procedure jointly organised by Rajiv Gandhi National Institute of Intellectual Property Management, Nagpur and Delhi Technological University on 28^th May 2018.

Attended a National workshop on “Recent Advances in Alternative Energy sources” held at the Department of Mechanical Engineering, Delhi Technological University, Delhi on 29^th June 2018.

Participated in “International day of Yoga” held on 21^st June 2018 organised by Delhi Technological University.

Participated in the “International day of Yoga” held on 21^st June 2019, organised by Delhi Technological University.

Attended one day workshop on “Sensitisation of University Administration: Gender, disability and Social inclusion” organised by equal opportunity cell, Delhi Technological University on 24^th July 2019.

Attended TEQIP III sponsored two day workshop on “Recent Trends in welding Technology” organised by the Department of Mechanical Engineering, Delhi Technological University during 22^nd – 23^rd August 2019.

Participated in the International Conference on Atomic, Molecular, Optical and Nano Physics with applications ( CAMNP-2019) HELD AT Delhi Technological University, Delhi during 18^th-19^th December 2019.

Attended two two-day workshop on “Material Characterisation and Testing” organised by the Department of Mechanical Engineering, Delhi Technological University, Delhi during 26^th-27^th April, 2022.

EXPERT LECTURES DELIVERED:

Delivered expert lecture on Composite material at  Two weeks Faculty Development Program on “Advanced Manufacturing and Operations Management(AMOM-2017), Organised by the Centre for Advanced Production and Industrial Engineering Research, Department of Mechanical Engineering, Delhi Technological University, Delhi, during July 03-14,2017.

Delivered expert lecture on Microstructural characterisation of Steels & Cast Irons on 26^th April 2022 in two days workshop on “Material Characterisation and Testing” organised by the Department of Mechanical Engineering, Delhi Technological University, Delhi held during 26^th –  27^th April 2022.

AWARDS RECEIVED:

Received best paper award at the International conference on emerging trends in Electro-Mechanical Technologies and Management (TEMT-2019) organised by HMR Institute of Technology and Management, New Delhi, during 26-27 July 2019.

FACULTY DEVELOPMENT PROGRAMS ATTENDED: 24 one-week programs.