Dr. Rajiv Chaudhary

(Mech. Engg. Deptt.)

Phone:917291916473
Email: rajivchaudhary@dce.ac.in

Qualifications

Ph.D. (Mech. Engg.) [University of Delhi], M. Tech. (Hons.) [MNNIT, Allahabad], BE (Mech. Engg.), MNREC Allahabad (University of Allahabad)

Areas of Interest

BIOFUELS and BIOENGINEERING

1- Research Index
ResearchGate Google Scholar
Citations 400 Citaions 600
h-index 11 h-index  12
RG Score 23.78 i10-index 17

 

2-Sponsored Research Project Activity
1- Worked  as Investigator in the sponsored project of MNES (Ministry of Non Conventional Energy Sources)  under Prof. Naveen Kumar (as Principal Investigator). at the Biodiesel Research & Development Centre established at DELHI COLLEGE OF ENGINEEING. [Completed the MNES project on “Development of an Efficient Biodiesel Reactor for Rural Application and Utilisation of Multi-feedstock Derived Biodiesel in Medium Capacity Diesel Engine”].
2- Worked as the member, on the DCE-YANMAR (YANMAR Co. Ltd is A Leading Diesel Engine manufacturing Co. of Japan.) collaborative research project, on “Performance & Endurance tests on a Yanmar 10 KW Diesel Generator Set fuelled with neat Biodiesel (B100)”  Under the project the Engine was run on neat Biodiesel for 6,000 hrs, for a extensive study & analysis of the Biodiesel Fuel,  under the team leadership of  Prof. Naveen Kumar.
3- Worked as member of the PCRA (Petroleum Conservation Research Association) Sponsored Project of “Development & Process optimization of a medium capacity state of Art Biodiesel processing Unit”. Commissioning of 1tpd Biodiesel unit has been completed, and the trial of the unit also has been done successfully, under the  team leadership of  Prof. Naveen Kumar.

 

3-Research Publications in International/National Journals and International/National Conferences 
1- Effect of layering pattern and fiber hybridization on viscoelastic properties of PALF/COIR hybrid epoxy composites – Mohit Mittal and Rajiv Chaudhary in  Journal of Mechanical Engineering and Sciences (JMES), Volume 15, Issue 1 (2021), pp 7894 – 7906, ISSN: 2289-4659 e-ISSN: 2231-8380 and DOI: https://doi.org/10.15282/jmes.15.1.2021.23.0623 
2- Effect of Friction Stir Processing (FSP) on the Wear Behavior of Cast AS21A Magnesium Alloy” - Sumit Joshi, Ramesh Chandra Singh and Rajiv Chaudhary in Surface Review and Letters, Volume 28, No. 1 (2021), 2050037 (12 pages), published by World Scientific Publishing Company. DOI: 10.1142/S0218625X20500377
3- “Microstructural and Wear Investigations of the Mg/B4C Surface Composite Prepared Through Friction Stir Processing” - Sumit Joshi, N. Yuvaraj, Ramesh Chandra Singh and Rajiv Chaudhary, in Transactions of the Indian Institute of Metals in Issue No. 12 of Volume – 73 of December 2020, pages 3007–3018 https://doi.org/10.1007/s12666-020-02102-8TIIM. 
4- "Effect of rotational speed in Friction Stir Processing on the microstructural and mechanical characteristics of cast AS21A magnesium alloy" by by Joshi, Sumit; Singh, Ramesh; Chaudhary, Rajiv in Materials Research Express, 6 (2019) – 0865f4. ISSN 2053-1591. Article reference: MRX-056554.R1 DOI :  https://doi.org/10.1088/2053-1591/ab0633
5- “An Experimental study of Tribological Behaviours of aluminium and Copper based metal matrix composites for Bearing applications” Vipin Kumar Sharma, Ramesh Chandra Singh and Rajiv Chaudhary in International Journal of Materials Engineering Innovation, Vol 10 No. 3, 2019. pp 202-217, ISSN online 1757-2762, ISSN print 1757-2754. DOI: 10.1504/IJMATEI.2019.101964
6- "Effects of Flyash Addition on the dry sliding tribological behavior of aluminum composites" by Sharma, Vipin; Singh, Ramesh; Chaudhary, Rajiv; Saxena, Mayank; Anand, Mukul in Materials Research Express, 6 (2019) – 0865f4. ISSN 2053-1591. Article reference: MRX-114347.R1
7- "Experimental Investigation on the Mechanical Properties and Water Absorption Behavior of Randomly Oriented Short Pineapple/Coir Fiber-Reinforced Hybrid Epoxy Composites" Mohit Mittal and Rajiv Chaudhary in Materials Research Express, 6 (2019) –  015313.
8- "Effect of Fiber Content on Thermal Behavior and Viscoelastic Properties of PALF/Epoxy and COIR/Epoxy Composites"- Mohit Mittal and Rajiv Chaudhary in Materials Research Express in Article reference : MRX2-101297. R1 Express 5 (2018) 125305.
9- "Wear and Friction Behavior of Aluminium metal Composite Reinforced with Graphite Particles" - Vipin Kumar Sharma, Ramesh Chandra Singh and Rajiv Chaudhary in International Journal of Surface Science and Engineering, Vol. 12, Nos. 5/6, 2018, pp 419-432. ISSN online 1749-7868 ISSN print 1749-785X.
10- "Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites.” – Vipin K. Sharma, R. C. Singh and Rajiv Chaudhary, in Engineering Science and Technology, an International Journal. ELSEVIER. Volume 20, October 2017, Pages1318–1323. ISSN  2215-0986.
11- "An eco-friendly and inexpensive solvent for solution processable CuSCN as a hole transporting layer in organic solar cells” - Neeraj Chaudhary, Rajiv Chaudhary, J.P. Kesari, and Asit Patra, in Optical Materials, ELSEVIER. Volume 69, April 2017, Pages 367–371. ISSN 0925-3467.
12- "Development of an innovative polygeneration process in hybrid solar-biomass system for combined power, cooling and desalination” - U. Sahoo, R. Kumar, P.C. Pant, R. Chaudhary, in Applied Thermal Engineering, ELSEVIER. Volume 120, April 2017, Pages 560–567. ISSN 1359-4311.
13- "Resource assessment for hybrid solar-biomass power plant and its thermodynamic evaluation in India” - U. Sahoo, R. Kumar, P.C. Pant, R. Chaudhury, in Solar Energy, ELSEVIER. Volume 139, September 2016, Pages 47–57. ISSN 1364-0321.
14- "Low band gap polymeric solar cells using solution-processable copper iodide as hole transporting layer” - Neeraj Chaudhary, J.P. Kesari, Rajiv Chaudhary and Asit Patra, in Optical Materials, ELSEVIER. Volume 58, March 2016, Pages 116–120. ISSN 0925-3467.
15- "Scope and sustainability of hybrid solar–biomass power plant with cooling, desalination in polygeneration process in India” - U. Sahoo, R. Kumar, P.C. Pant, R. Chaudhury, in Renewable & Sustainable Energy Reviews, ELSEVIER. Volume 51, November 2015, Pages 304–316. ISSN 1364-0321
16- “Copper Thiocyanate (CuSCN): An Efficiency Solution-Processable Anode Interfacial Layer In Organic Solar Cells” - Neeraj Chaudhary, Rajiv Chaudhary, J. P. Kesari, Asit Patra and Suresh Chand in Journal of Materials Chemistry C, Volume 3 Number, Issue 45, 2015,Pages 11886-11892, ISSN 0959-9428
17- “Effect of layering pattern on flammability and water absorption behavior of pineapple leaf/coir fiber reinforced hybrid composites” by Mohit Mittal and Rajiv Chaudhary in Journal on Material Science, Vol 7, No. 1, April - June 2019 pp 44-54. DOI: 10.26634/jms.7.1.15204
18- “Experimental Investigation on the Thermal Behavior of Untreated and Alkali-Treated Pineapple Leaf and Coconut Husk Fibers” - Mohit Mittal and Rajiv Chaudhary in International Journal of Applied Science and Engineering, 76(1): pp 01-16, June 2019. Print ISSN : 2321-0745 Online ISSN : 2322-0465. DOI: 10.30954/2322-0465.1.2019.1
19- SAE Technical Paper (2019-01-0824) – “Experimental Study of Sliding Wear Behavior of the Casted Lead Bronze Journal Bearing Material” Vipin Kumar Sharma, Ramesh Chandra Singh and Rajiv Chaudhary - with session SS103 - Design Optimization - Methods and Applications (Part 1 of 5).  02nd April, 2019 doi:10.4271/2019-01-0824. ISSN 0148-7191
20- “Biodegradability and Mechanical Properties of Pine Apple Leaf Fire /COIR Fiber Reinforced Hybrid Epoxy Composites" Mohit Mittal and Rajiv Chaudhary in Materials Research Express, 6 (2019) – 045301
21- “Fabrication and sliding wear behavior of some lead-free bearing materials" – Ramesh Chandra Singh, Rajiv Chaudhary and Vipin Kumar Sharma in Materials Research Express, 6 (2019) – 066533
22- "Effect Of Alkali Treatment On The Water Absorption Of Pineapple Leaf Fiber” - by Mohit Mittal and Rajiv Chaudhary in International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) in Volume No: 4 & Issue No: 12, of December 2018. e ISSN 2455-2585. Pp 300-305.
23- SAE Technical Paper (2018-01-0838) – “Study of Starting Friction during the Running of Plain Journal Bearing under Hydrodynamic Lubrication Regime” Vipin Kumar Sharma, Ramesh Chandra Singh and Rajiv Chaudhary - Automotive Tribology (Part 1 of 2). 03rd April, 2018 doi:10.4271/2018-01-0838. ISSN 0148-7191.
24- “Effect of composition ratio of P3HT:PC61BM in organic solar cells: optical and morphological properties” - Neeraj Chaudhary, Rajiv Chaudhary, J. P. Kesari & Asit Patra in Materials Research Innovations (Taylor & Francis online Journal) Pages 1-5, April 2017. ISSN: 1432-8917 (Print) 1433-075X (Online). Journal homepage: http://www.tandfonline.com/loi/ymri20
25- “Experimental Studies for the role of Piston Rings Face profiles on the performance of a Diesel Engine fueled with Diesel and Jatropha based Biodiesel” - R. C. Singh, R. Chaudhary, R K Pandey and S Maji, in JSIR [Journal of Scientific & and Industrial Research from (CSIR)] Vol. 71, January 2012, p. 57-62, ISSN: 0975-1084 (Online) and ISSN: 0022-4456 (Print).
26- “Experimental Study of Tribological Behavior of Casted Aluminium-Bronze.” Vipin K. Sharma, R. C. Singh, Rajiv Chaudhary in Materials Today: Proceedings 5 (2018), of Science Direct (Elsevier) pp  28008–28017.
27- “Mechanical and wear performance of surface composite fabricated by solid-state technique-a review” - Rajiv Chaudhary, Sumit Joshi and Ramesh Chandra Singh in the Materials Today: Proceedings 5 (2018) of Science Direct (Elsevier)28033–28042 
28- “Production of Biodiesel from Thumba Oil: Optimization of Process Parameters” Ashish Karnwal, Naveen Kumar, M.M. Hasan, Rajiv Chaudhary, Arshad Noor Siddiquee and Zahid A. Khan, in Iranica Journal of Energy & Environment 1 (4): 351-357, 2010 ISSN 2079-2115.
29- “Effect of Fiber Length and Content on the Mechanical Properties of Pineapple Leaf Fiber Reinforced-Epoxy Composites” – Mohit Mittal and Rajiv Chaudhary in Advances in Science and Technology: ISSN: 1662-0356, Vol. 106, pp 68-77 © 2021 Trans Tech Publications Ltd, Switzerland
30- “Influence of Walnut (Juglans L.) Shell Particles Addition on the Mechanical Properties of Epoxy Composites” – Mohit Mittal, Kanchan Phutela, and Rajiv Chaudhary in Applied Mechanics and Materials : ISSN: 1662-7482, Vol. 903, pp 117-124 © 2021 Trans Tech Publications Ltd, Switzerland
31- "Development of PALF/Glass and COIR/Glass Fiber Reinforced Hybrid Epoxy Composites" - by Mohit Mittal and Rajiv Chaudhary in Journal of Materials Science and Surface Engineering (MS: JMSSE-651802) in the volume 6(5): November 2018, pp 851-861 ISSN (Online): 2348-8956
32- "Effect Of Alkali Treatment On The Water Absorption Of Pineapple Leaf Fiber” - by Mohit Mittal and Rajiv Chaudhary in International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) in Volume No: 4 & Issue No: 12, of December 2018. e ISSN 2455-2585. Pp 300-305.
33- "Experimental Study on the Water Absorption and Surface Characteristics of Alkali Treated Pineapple Leaf Fibre and Coconut Husk Fibre" - Mohit Mittal & Rajiv Chaudhary in International Journal of Applied Engineering Research (IJAER). ISSN 0973-4562, Volume 13, Number 15 (2018) pp. 12237-12243
34- “Experimental Investigation of Influence of SiO2 Nanoparticles on the Tribological and Rheological properties of SAE 40 Lubricating Oil” – Sumit Chaudhary, Ramesh Chandra Singh and Rajiv Chaudhary in the International Journal of Engineering and Technology (IJET), Volume 9, No. 6, Dec 17-Jan 18 ISSN (Print)  : 2319-8613,  ISSN (Online) : 0975-4024 pp 4307-4314.
35- “Effect of Fiber Surface Treatment on Mechanical Properties of Bio composites: a Review” - Mohit Mittal & Rajiv Chaudhary, in International Journal for Research in Applied Science & Engineering Technology (IJRASET). Volume 05, Issue-X October 2017, ISSN: 2321-9653  pp 1992-2005.
36- “Effective Approach to Overcome the Problem of Thermal Degradability in Natural Fiber-reinforced Composites is Flame Retardants: A Review” - Mohit Mittal & Rajiv Chaudhary, in International Journal of Research. Volume 04, Issue-13 October 2017 e-ISSN: 2348-6848 p-ISSN: 2348-795X  pp 544-556
37- “Influence of Walnut (Juglans L.) Shell Particles Addition on the Mechanical Properties of Epoxy Composites” – Mohit Mittal, Kanchan Phutela, and Rajiv Chaudhary in Applied Mechanics and Materials : ISSN: 1662-7482, Vol. 903, pp 117-124 © 2021 Trans Tech Publications Ltd, Switzerland
38- “Design Optimization and Analysis of Car Bumper with the Implementation of Hybrid Biocomposite Material” - Vipul Jain, Mohit Mittal and Rajiv Chaudhary  in the IOP Conference Series: Materials Science and Engineering 804 (2020) 012004 doi:10.1088/1757-899X/804/1/012004, pp 01-11,  [International Symposium on Fusion of Science and Technology (ISFT 2020)]
39- “Experimental Investigations and Taguchi Analysis with Drilling Operation: A Review” - Rajiv Chaudhary, M. S. Ranganath, R. C. Singh and Vipin in IJISR (International Journal of Innovation and Scientific Research), pp. 126-135, Jan. 2015, Vol. 13 No. 1, ISSN 2351-8014.
40- “Improved Biodiesel Production from Feedstocks of Very High Free Fatty Acid and Process Optimization with Transesterification” Rajiv Chaudhary, S. Maji, Naveen Kumar, P. B. Sharma & R. C. Singh, in Journal of Multidisciplinary Engineering Technologies,Volume-5,No.2, p21-27, July 2011, ISSN-0974-1771.
41- “Factors Affecting the Performance of Biocomposite: A Review”- Mohit Mittal & Rajiv Chaudhary, in International Journal of Research. Volume 04, Issue-13 October 2017 e-ISSN: 2348-6848 p-ISSN: 2348-795X  pp 749-758.
42- Presented and Published Paper titled “Effect of fibre length and content of the mechanical properties of pineapple leaf fiber reinforced-epoxy composites” (1129) – Mohit Mittal and Rajiv Chaudhary at  the International Conference on Advances in Material Science & Mechanical Engineering (ICAMSME-2020)  organized by Department of Mechanical Engineering, N.B.K.R. Institute of Science & Technology (Autonomous), Vidyanagar, Nellore (Andhra Pradesh). during 07th to 09th Feb 2020.
43-  Paper presented on “A Fuzzy AHP Approach for Prioritizing Diesel Locomotive Sheds a Case Study in Northern Railways Network” – Reetik Kaushik, Yasham Raj Jaiswal, Roopa Singh, Ranganath M. Singari & Rajiv Chaudhary and published as Lecture Notes in Mechanical Engineering (Springer), in Select Proceedings of ICAPIE 2019 on Manufacturing and Industrial Engineering. pp 231-246. ISSN 2195-4356 ISSN 2195-4364 (electronic), ISBN 978-981-15-8541-8 and ISBN 978-981-15-8542-5 (eBook) https://doi.org/10.1007/978-981-15-8542-5_20.
44- “Microstructural and wear characterisation of as-cast AS21A magnesium alloy” - Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary in IOP Conf. Series: Journal of Physics: doi:10.1088/1742-6596/1240/1/012127, Conf. Series 1240 (2019) 012127, J. Phys.: Conf. Ser. 1240 012127 (IOP Publishing)
45- “Experimental Study of Tribological Behavior of Casted Aluminium-Bronze.” Vipin K. Sharma, R. C. Singh, Rajiv Chaudhary in Materials Today: Proceedings 5 (2018), of Science Direct (Elsevier) pp  28008–28017.
46- “Mechanical and wear performance of surface composite fabricated by solid-state technique-a review” - Rajiv Chaudhary, Sumit Joshi and Ramesh Chandra Singh in the Materials Today: Proceedings 5 (2018) of Science Direct (Elsevier) 28033–28042.
47- "Tribological studies and Microstructural characterisation of SiC and Fly Ash Particles Based Aluminium 2024 alloy Composites Prepared through Stir Casting Route” - Ashish Kumar, R.C. Singh, Rajiv Chaudhary, Virendra Pratap Singh in the IOP Conference Series: Materials Science and Engineering 804 (2020) 012025 doi:10.1088/1757-899X/804/1/012025, pp 01-08,  [International Symposium on Fusion of Science and Technology (ISFT 2020)]
48- Emmission and Performance Analysis of Producer gas as in IC Engine Fuel: A Technical Review – Ankur Dixit, Abhishek Srivastava, Er Anmol, Akash Gupta, Nishant Garg and Dr. Rajiv Chaudhary in International Conference on Computational and Experimental Methods in Mechanical Engineering (ICCEMME-2019), organized by G L Bajaj Institute of Technology and Management (GLBITM), Greater Noida.during 03-05 May 2019, (Published in IOP Conf. Series: Materials Science and Engineering 691 (2019) 012070 IOP Publishing doi:10.1088/1757-899X/691/1/012070
49- “Experimental investigations for erosive wear of Mild Steel Pipe bends at different positions in Pneumatic Conveying System (PCS)” - Bharat Singh Yadav, Dr. R C Singh, Dr. Rajiv Chaudhary  in the IOP Conference Series: Materials Science and Engineering 804 (2020) 012008 doi:10.1088/1757-899X/804/1/012008, pp 01-08,  [International Symposium on Fusion of Science and Technology (ISFT 2020)]
50- Presented and Published Paper titled “Influence of walnut shell particles addition on mechanical properties of epoxy composites” (1127) – Mohit Mittal and Rajiv Chaudhary at  the International Conference on Advances in Material Science & Mechanical Engineering (ICAMSME-2020)  organized by Department of Mechanical Engineering, N.B.K.R. Institute of Science & Technology (Autonomous), Vidyanagar, Nellore (Andhra Pradesh). during 07th to 09th Feb 2020.
51- "Characterisation of floor tiles reinforced aluminium surface composite synthesized by friction stir processing” - Ved Prakash Kushwaha, Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary in the IOP Conference Series: Materials Science and Engineering 804 (2020) 012013 doi:10.1088/1757-899X/804/1/012013, pp 01-09,  [International Symposium on Fusion of Science and Technology (ISFT 2020)]
52- “Sustainability: an Essential Concept for Current and Upcoming Technological Practices” - Ankur Dixit and Rajiv Chaudhary in the IOP Conference Series: Materials Science and Engineering 804 (2020) 012023 doi:10.1088/1757-899X/804/1/012023, pp 01-07,  [International Symposium on Fusion of Science and Technology (ISFT 2020)]
53- Some Experimental Investigation on Indian origin Multi-Feedstocks derived  Biodiesel.”-Rajiv Chaudhary, Naveen Kumar, S. Maji, P. B. Sharma,  R. C. Singh and Ashish Karnwal, in Journal of  Biofuel, p 21-32,  January-June 2011, Volume-2, Issue-1, Print ISSN : 0976-3015. Online ISSN: 0976-4763.
54- “Failure of Piston in IC Engines: A Review” - R. C. Singh, Roop Lal,  Ranganath M S and Rajiv Chaudhary in IJMER (International Journal of Modern Engineering Research) p 1-10, Sept. 2014, Vol. 4, Issue. 9, ISSN: 2249–6645.  
55- Presented Paper titled “Applications of Piezoelectricity: Home safety device” - Mantavya Sehgal, Mayank Uttam, Nikhil Mantry, Rajiv Chaudhary, in  International Conference on Recent Advances in Mechanical Engineering (RAME-2020) and Published in WEENTECH Proceedings in Energy 6 (2) (2020), pp 59-66.
56-  “Non-Conventional Actuation Mechanisms used in Mechatronic Systems” – Rajiv Chaudhary, Alok Kumar Singh, in IJAPIE (International Journal of Advanced Production and Industrial Engineering) [IJAPIE-2018-1-122], Volume 3, Issue 1(2018), pp 05-10, (ISSN: 2455–8419).
57- “Performance Evaluation of an Air Cooled Diesel Engine Fuelled with Neat Neem Oil and Diesel Blends.”  R. C. Singh, R. Chaudhary, R. K. Pandey, S. Maji, A. Babbar,  B. S. Chauhan, Raghvendra Gautam , C. Mishra, in Journal of  Biofuel, p 58-64,  January-June 2012, Volume-3, Issue-1, Print ISSN : 0976-3015. Online ISSN: 0976-4763.
58- “Experimental  Investigation  of  Friction  and  Wear  Behavior  at  the Interface of Aluminium and Mild Steel” - Ranganath M S, R. C. Singh, Rajiv Chaudhary and R. K. Pandey in IJARI (International Journal of Advance Research and Innovation) Volume 2, Issue 4 (2014) pp 775-780  ISSN 2347 – 3258.
59- “Analysis  of  Ball  Bearings  under  Dynamic  Loading  Using  Non- Destructive Technique of Thermography” - R. C. Singh, R. K. Pandey, Rajiv Chaudhary, Ranganath. M. S., Himanshu Saxena. in IJARI (International Journal of Advance Research and Innovation) Volume 2, Issue 4 (2014) pp 781-783  ISSN 2347 – 3258
60- “Simulation of Inertia Friction Welding of Mild Steel and Aluminium 6061 using Finite Element Method on ABAQUS  ” – Pushpendra Nimesh, Rajiv Chaudhary, R C Singh and Ranganath M S, in IJAPIE (International Journal of Advanced Production and Industrial Engineering) [IJAPIE-2016-10-405], Volume 1, Issue 4(2016), pp 29-39, (ISSN: 2455–8419).
61- “Analysis and Synthesis of Gold Nanoparticles” - Sumit Chaudhary, Sonia, R.C.Singh and Rajiv Chaudhary in IJAPIE (International Journal of Advanced Production and Industrial Engineering) [IJAPIE-2016-04-208], Volume 1, Issue 2(2016), pp 39-42, (ISSN: 2455–8419).
62- “Experimental Analysis of Journal Bearing under Hydrodynamic Lubrication” – Vipin K. Sharma, R.C.Singh and Rajiv Chaudhary in IJAPIE (International Journal of Advanced Production and Industrial Engineering) [IJAPIE-2016-07-303], Volume 1, Issue 3(2016), pp 16-17, (ISSN: 2455–8419).
63- “Enhancing Bone Strength with Weight Bearing Exercises/Activities” - Rajiv Chaudhary and Ramesh Chandra Singh, in JHSS (Journal of Health and Sports Sciences), Volume 10, No. 1, (Total No. 14), Half Yearly, July 2016 p 1-6 (ISSN: 0975–4563).
64- “A survey on tribological performance of light-weight alloys subjected to Friction Stir Processing.” (NFEST/2018/R–110)– Sumit Joshi, Rajiv Chaudhary, Ramesh Chandra Singh in Ist International Conference on New Frontiers in Engineering, Science and Technology (NFEST-2018) organized by Society for Fusion of Science & Technology, during January 08-12, 2018. (ISBN:978-93-86238-41-2) pp 439-444.
65- “Surface Modification of Cast Magnesium Alloy Through Friction Stir Processing.” - Sumit Joshi, Rajiv Chaudhary, R C Singh (ID:ICAPIE-2017-15) at the International Conference on Advanced Production and Industrial Engineering  (ICAPIE-2017), organized by Delhi Technological University during 06-07 October, 2017. (ISBN: 978-93-84588-07-6) pp 128-132. 
66- “Analysis of Leaded Bronze Hydrodynamic Journal Bearing: Experimental and Artificial Neural Network Approach.”( NFEST/2018/R–177) - Vipin Kumar Sharma, Rajiv Chaudhary, Ramesh Chandra Singh in the Ist International Conference on New Frontiers in Engineering, Science and Technology (NFEST-2018) organized by by Society for Fusion of Science & Technology, during January 08-12, 2018. (ISBN:978-93-86238-41-2). pp731-737.
67- “Mechanism of Crack Generation and Propagation in Metals.” (NFEST/2018/R–114) - Vinod, Bakir, Sumit Chuadhary, R.C. Singh and Rajiv Chaudhary in the Ist International Conference on New Frontiers in Engineering, Science and Technology (NFEST-2018) organized by by Society for Fusion of Science & Technology, during January 08-12, 2018. (ISBN:978-93-86238-41-2). pp 463-467
68- “Influence of fuel additives on performance and emission characteristics of CI engine – A review”( NFEST/2018/R–046) - Nitesh Bansal and Rajiv Chaudhary, in the Ist International Conference on New Frontiers in Engineering, Science and Technology (NFEST-2018) organized by by Society for Fusion of Science & Technology, during January 08-12, 2018. (ISBN:978-93-86238-41-2). pp-173-177
69- “Synthesis and Characterization of  ZnO Nanoparticles” – Sumit Chaudhary, Gaurav Masiwal, Ramesh Chandra Singh, Rajiv Chaudhary (ID:ICAPIE-2016-103) at the International Conference on Advanced Production and Industrial Engineering  (ICAPIE-2016), organized by Delhi Technological University during 9-10 December, 2016. (ISBN: 978-93-85909-51-1) pp 14-17.
70- “Interfacial adhesion characteristics between natural fibres and polymer resin : a Review” -Mohit Mittal, Rajiv Chaudhary, and R C Singh (ID:ICAPIE-2016-106)  at the International Conference on Advanced Production and Industrial Engineering  (ICAPIE-2016), organized by Delhi Technological University during 9-10 December, 2016. (ISBN: 978-93-85909-51-1) pp 62-69
71- “Fabrication of Mg Alloy/B4C Surface Composite by Friction Stir Processing”- Sumit Joshi, Rajiv Chaudhary and Ramesh Chandra Singh (ID:ICAPIE-2016-152) at the International Conference on Advanced Production and Industrial Engineering  (ICAPIE-2016), organized by Delhi Technological University during 9-10 December, 2016. (ISBN: 978-93-85909-51-1) pp 82-86.
72- "Fabrication of Magnesium based Metal Matrix Composites Through Friction Stir Processing – A Review" Sumit Joshi, N. Yuvaraj, Rajiv Chaudhary and R. C. Singh, at the International Conference on Recent Advances in Mechanical Engineering (RAME-2016) organized by Delhi Technological University during 14 & 15 October, 2016. P 89-94.
73- “Effects of Cetane Improver on Diesel Engine Performance and Emissions”- Nitesh Bansal, Rajiv Chaudhary, R C Singh at the International Conference on Recent Advances in Mechanical Engineering (RAME-2016) organized by Delhi Technological University during 14 & 15 October, 2016. P 271-276
74- “Study of Impact Strength of Biomaterials (Bones)” (ID:2016-ISFT-136) - Rajiv Chaudhary, Ramesh Chandra Singh and Ranganath M Singari at Vth International Symposium on Fusion of Science & Technology (ISFT-2016), organized by Society for Fusion of Science & Technology (ISBN: 978-93-84935-64-1) during January 18-22, 2016. pp 50-53. 
75- “Experimental Investigation of the Temperature Variation and Vibrations at Different Loads at the Periphery of Single Cylinder Diesel Engine” (ID: 2016-ISFT-406)-Sumit Chaudhary, Vipin Kumar Sharma, R.C. Singh & Rajiv Chaudhary at Vth International Symposium on Fusion of Science & Technology (ISFT-2016), organized by Society for Fusion of Science & Technology (ISBN: 978-93-84935-64-1) during January 18-22, 2016. pp 573-579. 
76- “Quad-Rotor Unmanned Arial Vehicle – A Review” - (ICARI-ME-15-01-126) - Rajiv Chaudhary, Ranganath M. S., R. C. Singh, Arjav Desai, Aakash Chaudhary, Mayank Garg at the International Conference of Advance Research and Innovations (ICARI-2015) Organized by International Journal of Advance Research and Innovations (ISBN-978-93-5156-328-0) (www.ijari.org) on 31st January, 2015 at Delhi. pp 116-119
77- “Study of  4 Wheel Steering  Systems  to  Reduce  Turning  Radius  and Increase Stability” (ICARI-ME-14-02-127) - Arun Singh, Abhishek Kumar, Rajiv Chaudhary and R.C.Singh at the International Conference of Advance Research and Innovations (ICARI-2014) Organized by International Journal of Advance Research and Innovations (ISBN-978-93-5156-328-0)  (www.ijari.org) on 02nd February, 2014 at Delhi. pp 96-102
78- “Experimental Investigation of Defective Ball Bearings with Vibration Analyser” - Himanshu Saxena, R C Singh, Rajiv Chaudhary and Ranganath M S (ICARI-ME-14-02-162) at the International Conference of Advance Research and Innovations (ICARI-2014) Organized by International Journal of Advance Research and Innovations (ISBN-978-93-5156-328-0)  (www.ijari.org) on 02nd February, 2014 at Delhi. pp 636-641
79- “Study of Mechanical Properties of Biomaterials: (Bones)” (ISTE-170) - Rajiv Chaudhary, Ramesh Chandra Singh and Ranganath M S, at Delhi Section Convention of Indian Society for Technical Education (ISTE) on “Technological Universities and Institutions in New Knowledge Age: Future Perspectives and Action Plan”, during 05-06 September 2013, organized by Delhi Technological University, Delhi.
80- “Mechanical Prospects of Bio Fibers” - Rajiv Chaudhary, Ramesh Chandra Singh and Ranganath M S at International Conference on Smart Technologies for Mechanical Engineering (STME-2013) organized by Delhi Technological University during October 25-26, 2013. (ISBN: 978-93-83083-35-0), pp 923-926.
81- Presented paper titled “Goal Programming Approach To Metal Machining”, - Vikas Kukreja, Ramesh Chandra Singh, Rajiv Chaudhary and Sagar Maji, pp 250-254, at RAME–2007, National Conference on ‘Recent Advances in Mechanical Engineering’ in 28-29, March 2007. at Baba Saheb Dr. Bhim Rao Ambedkar College of Agricultural Engineering & Technology Etawah.
82- Presented Paper titled “An Experimental Investigation into Utilization of Multi-Feedstocks Derived Biodiesel in a Medium Capacity Diesel Engine” (ID: 2010/NFIB/097) –  Rajiv Chaudhary, R C Singh and Dr. S. Maji, at the Ist International Conference on “New Frontiers in Biofuels’ organized by Delhi Technological University during January 18-19, 2010.
83- Presented Paper titled “Improved Conversion of High FFA Feedstock into FAME and Process Optimization” (ID: 2010/NFIB/098) – Rajiv Chaudhary, Dr S Maji and Dr. P. B. Sharma, at the Ist International Conference on “New Frontiers in Biofuels’ organized by Delhi Technological University during January 18-19, 2010.
84- Presented paper titled “An Innovative Approach to Time Study Through Maynard  Operation Sequence Technique” – Rajiv Chaudhary, Ramesh Chandra Singh and Vikas Kukreja, pp 638- 646, at 15th ISME International Conference on Advances in Mechanical Engineering at RGTU, Bhopal, 18th-20th March, 2008.
85- Presented paper titled “Design and Development of Low cost Balling Machine with variable Speed, Length and Flight” - Saurabh Gupta, Satwinderjit Singh, Sachin Mittal, Vipin Bharti, Vishwanath Tiwari, Rahul Srivastava, Rajiv Chaudhary and Rangnath M S, p 45-46 , at ‘National Conference & Curriculum Development Workshop’ on State of Art Development in Sports Engineering” at Delhi College of Engg, Delhi during 14-16 Dec 2004.
86- Presented paper titled “Design and Development of the Cost Effective Cricket Bowling Machine”– Rajiv Chaudhary, Saurabh Gupta, Rahul Srivastava, Sachin Mittal, Vishwanath Tiwari and Satwinderjit Singh, p 87-93, at 14th ISME International Conference on Mechanical Engineering in Knowledge Age during 12-14th Dec  2005 at Delhi College of Engg, Delhi.
87-  

                                                                                                                                                                                 

Last Updated : 2021-05-09 05:35:48

4-Awards/Honours Received
(i) - Granted “Commendable Research Award” for the Excellence in Research in Recognition for the Research in year 2018, at Delhi Technological University  on 19th March 2019.
(ii) -Granted “Commendable Research Award” for the Excellence in Research in Recognition for the Research in year 2017, at Delhi Technological University  on 21st March 2018. 
(iii) -Passed M Tech Production Engineering (with Honours) in 2003.<