Dr. Mohammad Zunaid

Mechanical Engineering

Phone:9891851069
Email: mzunaid3k@gmail.com, mzunaid@dtu.ac.in

Qualifications

B.E. (Mechanical), M.Tech. (Thermal Science), PhD.

Areas of Interest

Computational Fluid Dynamics (CFD), Computational Heat Transfer and Fluid Flow, Fluid Mechanics, Fluid Dynamics, Refrigeration and Air Conditioning, Power Plant Engineering, Thermal Engineering.

Experience:-
  1. Working as Assistant Professor (selected through Union Public Service Commission) in department of Mechanical Engineering, Delhi Technological University (Formerly Delhi College of Engineering) Bawana Road Delhi from 09-03-2009 to till date.
  2. Worked as a lecturer in Aligarh College of Engineering and Technology, Aligarh form 11-09-2008 to 06-03-2009.
  3. Worked as a Finite Element Analysis (FEA) Engineer (coder) in Manufacturing Design Solutions (MDS) Gurgaon form 11-02-2008 to 29-08-2008.
  4. Worked as a Computational Fluid Dynamics (CFD) Engineer in Zeus Numerix Pvt. Ltd. (ZNPL) Mumbai form 06-08-2007 to 06-02-2008.
  5. Worked as a lecturer in Sir Chhotu Ram Institute of Engineering and Technology form 18-04-2006 to 31-07-2007.
  6. Worked as a lecturer in IIMT Engineering College, Meerut from 09-11-2005 to 17-04-2006.
  7. One month vocational training done in Bharat Heavy Electrical Ltd. (Haridwar) in heavy fabrication department from 05-06-2002 to 04-07-2002.
Qualifications:-
  1. PhD (Department of Mechanical Engineering) from Delhi Technological University, Delhi in 2018.
  2. M. Tech (Thermal Sciences) from Aligarh Muslim University, Aligarh with first division getting 67.51% marks in 2005.
  3. Bachelor of Engineering (Mechanical) from Aligarh Muslim University, Aligarh, from first division with honours and getting 3rd position with 78.40% marks in 2003.
  4. Diploma in Engineering (Mechanical) from Aligarh Muslim University, Aligarh, with first division (hons.) getting 81.86% marks in 1999.
Details of M.Tech. Thesis Supervised:
  1. CFD analysis of inclined jet impingement heat transfer in microchannel.
  2. CFD analysis of wind turbine blade at various angle of attack and different Reynold number.
  3. CFD analysis of wavy micro-channel heat sink with hemispherical obstruction.
  4. CFD analysis of inclined jet micro channel impingement heat sink.
  5. Designing of solar process heating system for Indian automobile industry.
  6. CFD analysis of flow through cooling tower.
  7. CFD analysis of rectangular micro-channel heat sink.
  8. CFD analysis of cooling tower with Fluent solver.
  9. Simulation of cold spray process by Fluent-6.

Membership of Professional Socities:

  1. Life member of Indian Society of heat and mass transfer (ISHMT), membership no. LM- 722.
  2. Life member of Indian Society for Technical Education (ISTE), membership no. LM 82172.
  3. Life member of Solar Energy Society of India, membership no. LM/2046/2014.
  4. Member of Indian Society of Heating refrigeration & Air Conditioning Engineers, membership no. 21819.
  5. Life member of ‘The Institution of Engineers (India)’, membership no. M- 1533457.
  6. Life member of ‘Society for Fusion of Science and Technology’, life membership no. LM/ 2017/ 106.

Award/ Scholarship:

  1. Received commendable research award from DTU in recognition for the research during the year 2017.
  2. Received Graduate Aptitude Test of Engineering (GATE) scholarship during M.Tech. from MHRD.

Paper Published in National/ International Journals:

  1. M.F. Baig, M. Zunaid. “Numerical simulation of liquid metals in differentially heated enclosure undergoing orthogonal rotation.” International journal of heat and mass transfer (Elsevier).  Vol. 49, No.19, 2006, pp.3500-3513.
  2. M.F. Baig, M. Zunaid. “Effect of External body Force on natural convection in square enclosures.” Journal of Enhanced Heat Transfer. Vol. 13, No. 4, 2006, pp.333-353.
  3. M. Zunaid, Qasim Murtaza, Samsher Gautam. “Energy and performance analysis of multi droplets shower cooling tower at different inlet water temperature for air cooling application.” Applied Thermal Engineering, (Elsevier). Vol. 121, 2017, pp. 1070-1079.
  4. M. Zunaid, Q. Murtaza, Samsher. “Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature.” International Journal of Engineering, Transactions A. Vol. 30, Issue 7, 2017, pp. 1090-1097.
  5. M. Zunaid, A. Jindal, D. Gakhar1, A. Sinha. “Numerical study of pressure drop and heat transfer in a straight rectangular and semi cylindrical projections microchannel heat sink.” Journal of Thermal Engineering. Vol. 3, No. 5, 2017, pp. 1453-1465.
  6. P. Halder, A. Husain,  M. Zunaid, and A. Samad.  “Newtonian and Non-Newtonian Pulsatile Flows through an Artery with Stenosis.” The Journal of Engineering Research. Vol. 14, No. 2, 2017, pp. 191-205.
  7. Mohammad Zunaid, Afzal Husain, Anant Jindal, Avinash Gupchup. “Investigations of Fluid Flow and Convective Heat Transfer in Wavy Micro-Channel at Different Reynolds Numbers.” International Journal of Advanced Production and Industrial Engineering.” Vol. 2, Issue 1, 2017, pp. 23-28.
  8. Rajnish Kumar, M. Zunaid. “CFD Analysis of Wavy Microchannel Heat Sink with Hemispherical Obstructions and Comparing it with Experimental Results of Rectangular Microchannel Heat Sink.” International Journal of Research and Scientific Innovation. Vol. 03, Issue 10, 2016, pp. 19-26.
  9. Md. Nadim Shams, Raj Kumar Singh, M. Zunaid, Md. Gulam Mustafa. “CFD Modeling of Flow through S-Shaped Duct with Tangential Blowing.” International Journal of Advanced Engineering Research and Applications. Vol. 2, Issue 11, 2017, pp. 605-615.
  10. Anubhav Uppal, J P Kesari, Mohd. Zunaid. “Designing of Solar Process Heating System for Indian Automobile Industry.”  International Journal of Renewable Energy Research (IJRER). Vol. 6, Issue 4, 2016, pp. 1627-1636.
  11. Md.  Nadim  Shams, Raj Kumar  Singh, Md. Zunaid. “CFD Modeling of flow through S-Shaped Duct.”  International Journal of Advanced Engineering Research and Applications. Vol. 1, Issue 10, 2016, PP 413-423.
  12. Shubham Singh, M. Zunaid, Naushad Ahmad Ansari, Shikha Bahirani, Sumit Dhall, and S andeep Kumar. “Numerical Study of the Generic Sports Utility Vehicle Design with a Drag Reduction Add-On Device.” Journal of Computational Engineering. Vol. 2014, Article ID 785294.
  13. M. Zunaid, Lavya Upadhyay, NamanGupta, Shubham Kushwaha. “Cold Flow Simulation for an IC Engine with Different Lengths of Connecting Rod.” Vol. 14, Issue 1, 2017,  P.P 50-54.
  14. Prashant Kumar, Raghav Malhotra, Naushad Ahmed Ansari, Mohammad Zunaid. “CFD Simulations of Flow over Passenger Vehicle with Airfoils for Aerodynamic Lift Reduction.”  International Journal of Applied Engineering Research. Vol. 10, Issue 22, 2015, pp. 43152-43156.
Full Paper Published in National/ International Conference Proceedings:
  1. Afzal Husain, M. Zunaid “Microjet Impingement with flow extraction.” 1st International conference on new frontiers in engineering, science and technology (NFEST-2018) in New Delhi, India from January 08-12, 2018, pp. 381-383.
  2. M. Zunaid, Md. Gulam Mustafa, Nausad Ahmad Ansari. “Numerical Analysis of Wind Turbine Blade at Different Angle of Attack and Reynold Numbers Using Ansys.” International Conference on Recent Advances in Mechanical Engineering (RAME-2016) held on 14-15 October 2016 in Delhi Technological University, Bawana Road, Delhi-110042, India, pp. 223-228.
  3. Raj Kumar Singh, Mohammad Zunaid, Md. Gulam Mustafa, Jasmeet Singh. “CFD analysis and optimisation of operational parameters for an F1 racing car’s front wing to maximize its aerodynamic performance.” International conference on recent advances in mechanical engineering (RAME-2016),  pp. 253-260.
  4. Mohammad Zunaid, Afzal Husain, Anant Jindal, Avinash Gupchup. “CFD Analysis of wavy edge rectangular micro-channel heat sink at different Reynolds number. “International conference on recent advances in mechanical engineering (RAME-2016), pp. 303-307. 
  5. M. Zunaid, Qasim Murtaza, Samsher, S.S. Kachhwaha. “Analysis of Air and Water Spray Interaction In Downdraft Parallel Flow Shower Cooling Tower.” 22th National and 11th ISHMT- ASME Heat and Mass Transfer Conference in IIT Kharagpur, India from December 28-31, 2013.
  6. M. Zunaid, Qasim Murtaza, Samsher, S. S. Kachhwaha. “Exergy and Performance Analysis of Parallel Flow Shower Cooling Tower.” International Conference Smart Technologies for Mechanical Engineering in DTU, Delhi, India from 25-26 October, 2013, pp. 950-955.
  7. M. Zunaid, Qasim Murtaza, S. S. Kachhwaha. “Performance analysis of down draft parallel flow shower cooling tower.” 21st national & 10th ISHMT-ASME heat and mass transfer conference in IIT Madras, India from December 28-30, 2011, pp. 1-9.
  8. M. Zunaid, Qasim Murtaza, Samsher, S.S. Kachhwaha. “Theoretical Study of a Humidification-Dehumidification Desalination Process Using Down Draft Parallel Flow Shower Cooling Tower.” ISTE Delhi Section Convention in DTU, Delhi, India from 5-6 September, 2013, pp. 1-7.

Last Updated : 2021-04-08 13:23:21